Sublicense Rights Licensee shall not have the right to grant sublicenses under the licenses granted to it under Section 2.1(a) (Development and Commercialization License to Licensee) and Section 6.3(d) (Use of Coherus Trademark), without the prior written consent of Coherus, which consent may be withheld [***], except with respect to [***], in which case [***]. For the avoidance of doubt, it shall be [***] with respect to [***]. If Coherus consents in writing to allow Licensee to grant a sublicense, then Licensee may grant such sublicense, through [***], subject to the following: (a) each Sublicensee shall agree to be bound by all of the applicable terms and conditions of this Agreement; (b) the terms of each sublicense granted by Licensee shall provide that the Sublicensee shall be subject to the terms and conditions of this Agreement; (c) Licensee’s grant of any sublicense shall not relieve Licensee from any of its obligations under this Agreement; (d) Licensee shall be liable for any breach of a sublicense by a Sublicensee to the extent that such breach would constitute a breach of this Agreement, and any breach of the sublicense by such Sublicensee shall be deemed a breach of this Agreement by Licensee to the extent that such breach would constitute a breach of this Agreement as if Licensee had committed such breach; provided, however, that in each instance of any breach, Licensee and/or Sublicensee shall have the right to cure any such breach pursuant to the terms of this Agreement; and (e) Licensee will notify Coherus of the identity of any Sublicensee, and the territory in which it has granted such sublicense, promptly after entering into any sublicense. Notwithstanding anything to the contrary in this Agreement, for clarity, Licensee shall not have the right to grant sublicenses under Section 2.1 (License Grants) to any Third Party to Manufacture Products or to conduct Process Development.
License Rights The Recipient must provide a license to its “subject data” to the Federal Government, which license is: (a) Royalty-free, (b) Non-exclusive, and (c) Irrevocable, (2) Uses. The Federal Government’s license must permit the Federal Government to take the following actions provided those actions are taken for Federal Government purposes: (a) Reproduce the subject data, (b) Publish the subject data, (c) Otherwise use the subject data, and (d) Permit other entities or individuals to use the subject data, and
Sublicense Grant Licensee will be entitled to grant Sublicenses to third parties under the license granted pursuant to Section 2.1 subject to the terms of this Section 2.3. Any such Sublicense shall be on terms and conditions in compliance with and not inconsistent with the terms of this Agreement. The grant of a Sublicense shall not in any way diminish or alter Licensee’s obligations under this Agreement.
Sublicense SONY shall be permitted to sublicense the rights ---------- granted in Section
2.1 only to:
(a) wholly-owned subsidiaries of SONY; provided that SONY shall promptly notify LEXAR in writing of sublicenses granted to subsidiaries and SONY shall acknowledge responsibility for such subsidiary's compliance with the terms of this Lexar Technology License Agreement; and
(b) any parties for the manufacture, use, offer for sale, import and sale of Host Devices and any components of Host Devices, provided that such third parties shall only be sublicensed under LEXAR Intellectual Property Rights for that portion of a Host Device or of any component of a Host Device that communicates directly with a Licensed Memory Stick. SONY's sublicense rights under this Section 2.2(b) shall be contingent upon SONY entering into a written agreement with each sublicensee in the form of Exhibit C. SONY will provide LEXAR with a copy of each such --------- sublicense agreement immediately after execution thereof. Nothing in this Agreement shall be construed as permitting SONY to reveal LEXAR Confidential Information, as such term is defined in Section 6, to sublicensees under this Section 2.2(b). In the event that SONY determines that the Memory Stick Specification contains LEXAR Confidential Information, LEXAR and SONY agree to negotiate in good faith additional specific provisions to the form sublicensee agreement to sufficiently protect LEXAR's Confidential Information. LEXAR and SONY acknowledge that in the course of these negotiations, the parties' mutual interest in making the Host Device manufacturing license available as broadly as possible should be weighed against the importance of protecting LEXAR's Confidential Information. Sublicensees under this Section 2.2 shall not have the right to sublicense the rights granted under this agreement. * Material has been omitted and filed separately with the Commission.
Sublicenses (a) Licensee may sublicense the license and rights granted to Licensee under Sections 2.1, 2.2, 2.4, 2.5 and 2.6 (as applicable) to (a) its Affiliates and (b) Third Parties in connection with the operation of the business of Licensee or its Affiliates, but not for the independent use of any such Third Party, including distributors that need to practice the applicable Intellectual Property to provide ordinary course distribution services to Licensee and its Affiliates; provided that, with respect to the SpecCo Licensed Standards, sublicensing to such Third Parties shall be solely for such Third Parties to provide services to the Materials Science Business in the ordinary course at any or all Licensed Facilities (but not for the independent use of such Third Party), and (c) with the prior written consent of Licensor, other Third Parties (each such Affiliate or Third Party, or subcontractor granted a sublicense under Section 2.3, a “Sublicensee”).
(b) Each sublicense granted by a Licensee under the license granted to such Licensee in Sections 2.1, 2.2, 2.4, 2.5 and 2.6 shall be granted pursuant to an agreement that (i) is subject to, and consistent with, the terms and conditions of this Agreement and includes provisions at least as protective of Licensor and its Affiliates as the provisions of this Agreement (except that such sublicense shall not be required to provide rights for Licensor to audit Sublicensee in accordance with, and subject to, Section 2.13 (1) if the sublicense is granted to an Affiliate, (2) with respect to sublicenses of Licensed Know-How, Licensed Copyrights or Business Software where the primary purpose of such arrangement with sublicensee is not to grant access to such Licensed Know-How, Licensed Copyrights or Business Software or (3) with respect to sublicenses of the licenses granted under Section 2.6), (ii) to the extent with respect to Licensed Patents or SpecCo Licensed Standards and if Sublicensee is a Third Party, provides that Licensor shall be an intended beneficiary thereunder with the right of direct enforcement against the Sublicensee (including, for clarity, with respect to the audit rights set forth in Section 2.13 to the extent applicable), and (iii) to the extent with respect to Licensed Patents or SpecCo Licensed Standards, is in writing if the Sublicensee is a Third Party. For clarity, granting a sublicense shall not relieve Licensee of any obligations hereunder and Licensee shall cause each of its Sublicensees to comply, and shall remain responsible for its Sublicensees’ compliance, with the terms hereof applicable to Licensee.
License Grants The licenses granted in this Section 2 are subject to the terms and conditions set forth in this XXXX:
a. Subject to Section 2(b), you may install and use the Software on a single computer; OR install and store the Software on a storage device, such as a network server, used only to install the Software on your other computers over an internal network, provided you have a license for each separate computer on which the Software is installed and run. Except as otherwise provided in Section 2(b), a license for the Software may not be shared, installed or used concurrently on different computers.
b. In addition to the single copy of the Software permitted in Section 2(a), the primary user of the computer on which the Software is installed may make a second copy of the Software and install it on either a portable computer or a computer located at his or her home for his or her exclusive use, provided that:
A. the second copy of the Software on the portable or home computer (i) is not used at the same time as the copy of the Software on the primary computer and (ii) is used by the primary user solely as allowed for such version or edition (such as for educational use only),
B. the second copy of the Software is not installed or used after the time such user is no longer the primary user of the primary computer on which the Software is installed.
c. In the event the Software is distributed along with other PremiumSoft software products as part of a suite of products (collectively, the "Studio"), the license of the Studio is licensed as a single product and none of the products in the Studio, including the Software, may be separated for installation or use on more than one computer.
d. You may make one copy of the Software in machine-readable form solely for backup purposes. You must reproduce on any such copy all copyright notices and any other proprietary legends on the original copy of the Software. You may not sell or transfer any copy of the Software made for backup purposes.
e. You agree that PremiumSoft may audit your use of the Software for compliance with these terms at any time, upon reasonable notice. In the event that such audit reveals any use of the Software by you other than in full compliance with the terms of this Agreement, you shall reimburse PremiumSoft for all reasonable expenses related to such audit in addition to any other liabilities you may incur as a result of such non-compliance.
f. Your license rights under this XXXX are non-exclusive.
ROYALTIES AND PATENTS The Contractor shall pay all royalties and license fees. The Contractor shall defend all suits or claims for infringement of any patent rights and shall save the State harmless from loss on account thereof, except that the State shall be responsible for all such loss when a particular design, process or the product of a particular manufacturer or manufacturers is specified, but if the Contractor has reason to believe that the design, process or product specified is an infringement of a patent, The Contractor shall be responsible for such loss unless he promptly gives such information to the Architect.
Sublicensing Rights (a) The license(s) granted to Intellia in Section 2.1 and to Caribou in Section 2.2 may be sublicensed, in full or in part, by Intellia and Caribou, respectively, (each, the “Sublicensing Party”) by a written agreement to its Affiliates and Third Parties (with the further right to sublicense [***] provided that the following shall likewise apply with respect to sublicenses granted by a Sublicensee), provided, that:
(i) the Sublicensing Party will provide to the other Party a copy of any sublicense agreement with a Sublicensee within [***] days of execution thereof, which sublicense agreement may be redacted as necessary to protect commercially sensitive information to the extent such information is not reasonably necessary to determine compliance with this Agreement or to determine the rights granted under any of the Caribou IP or Intellia IP, as applicable (together with an accurate English translation of such sublicense, if applicable) provided that if such agreement is with a Related Party the Sublicensing Party shall provide an unredacted copy thereof;
(ii) the Sublicensing Party will be responsible for any and all obligations of such Sublicensee as if such Sublicensee were “Intellia” or “Caribou”, as applicable, hereunder;
(iii) any such Sublicensee will agree in writing to be bound by identical obligations as the Sublicensing Party hereunder with respect to the activities of such Sublicensee hereunder;
(iv) to the extent that the Sublicensing Party or any Sublicensee grants a sublicense under any intellectual property subject to a Caribou In-License or Intellia Included In-License, as applicable, such sublicense (and such further sublicensee) will be subject to the terms of such Caribou In-License or Intellia Included In-License, including such sublicensee’s compliance with the Required In-License Provisions [***].
License Types (a) A Team License shall mean a subscription license that provides a limited number of licenses to a set amount of developers for a named Customer. Customer must procure enough active licenses for each individual who has Programmatic Access. A Team License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. A Team License cannot be used as a floating license.
(b) A Project License shall mean a subscription license which covers one named Customer application. The license fees are based on the total number of developers working on a named project, regardless of whether such developers are directly using the Licensed Product. For the purposes of pricing and license administration, a “Project Group” is deemed to be a distinct Customer software team within a Customer’s business unit that works towards a distinct business purpose for the benefit of a single application. Customer is required to identify the name of each such Project Group to Syncfusion; such name must be unambiguous in nature. It is acknowledged and agreed by Customer that each identified Project Group shall exist for a valid business purpose and not just as a means for consolidating software licenses to minimize license fees that are otherwise due. If, in the sole opinion of Syncfusion, multiple Customer teams would each individually meet the above definition of a Project Group, such multiple teams shall not be combined for the purpose of consolidating licenses under a single Project Group. Customer is responsible for providing information about each such Project Group to Syncfusion. By entering into this Agreement, Customer represents that after the effective date, it will not withhold information that Syncfusion requires to properly license each such Project Group, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement.
(c) A Division License shall mean a subscription license which will cover one named Division and allow for development work on more than one project within such Division. A Division shall mean a business unit within Customer’s organization that works towards a distinct business purpose. Customer is required to identify the name of such Division to Syncfusion; such name must be unambiguous in nature. License fee determinations will be at the sole discretion of Syncfusion and be based on such factors including, but not limited to, Customer’s Division size, developer count, and the scope of the Division’s business purpose. By entering into this Agreement, Customer acknowledges that it is responsible for providing information about the named Customer Division to Syncfusion sufficient for Syncfusion to price the Division License, and Customer represents that it will not withhold information that Syncfusion requires to properly license each such named Customer division, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement.
(d) A Global License shall mean a subscription license for all development for a named Customer, where the license fees are based on the overall size of a named Customer. A Global License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.
(e) A Retail License shall mean a single named user, non-transferable license to use the Licensed Product. Retail Licenses will only made available to Customers in Syncfusion’s sole discretion and only when the number of such End-Users is finite and readily ascertainable. Accordingly, Syncfusion will make a determination as to whether or not the provision of Retail Licenses is appropriate under the circumstances applicable to any given Customer, and Syncfusion reserves the right, in its sole discretion, to refuse to make available Retail Licenses to a Customer and instead require a given Customer to procure a Project License, Division License, or Global License as circumstances dictate. A Retail License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.
Infringement of Third Party Rights Each Party shall promptly notify the other in writing of any allegation by a Third Party that the activity of either of the Parties hereunder infringes or may infringe the intellectual property rights of such Third Party. Genentech shall have the first right but not the obligation to control any defense of any such claim involving alleged infringement of Third Party rights by Genentech’s activities under this Agreement at its own expense and by counsel of its own choice, and Curis shall have the right but not the obligation, at its own expense, to be represented in any such action by counsel of its own choice. If Genentech fails to proceed in a timely fashion with regard to such defense, Curis shall have the right but not the obligation to control any such defense of such claim at its own expense and by counsel of its own choice, and Genentech shall have the right but not the obligation, at its own expense, to be represented in any such action by counsel of its own choice. Curis shall have the first right but not the obligation to control any defense of any such claim involving alleged infringement of Third Party rights by Curis’ activities under this Agreement at its own expense and by counsel of its own choice, and Genentech shall have the right but not the obligation, at its own expense, to be represented in any such action by counsel of its own choice. If Curis fails to proceed in a timely fashion with regard to such defense, Genentech shall have the right but not the obligation to control any such defense of such claim at its own expense and by counsel of its own choice, and Curis shall have the right but not the obligation, at its own expense, to be represented in any such action by counsel of its own choice. Neither Party shall have the right to settle any infringement action under this Section 10.5 in a manner that diminishes the rights or interests of the other Party hereunder without the consent of such Party.
