Common use of Supervisors Clause in Contracts

Supervisors. (a) Project Co shall employ competent supervisors and necessary assistants who shall be in attendance at the Site while work is being performed, and shall specifically include a competent mechanical and electrical coordinator and equipment coordinator. Project Co acknowledges that the supervisors are Key Personnel in accordance with Section 8.4. Project Co’s supervisors shall, subject to Section 8.4, devote their full time during working hours to the Project and remain at the Site until the Substantial Completion of the Work is achieved and thereafter, such supervisors shall, subject to the provisions of Section 8.4, devote sufficient time and effort to the Project as necessary until the final certificate of payment has been issued by the Consultant and all Minor Deficiencies have been rectified. Project Co shall include in its staff separate qualified mechanical and electrical coordinators who shall be responsible for (i) coordinating the general, mechanical and electrical shop drawings submitted by the Subcontractors and Suppliers for various trades or divisions of the Work; (ii) checking for any conflicts or interferences of the Work of one division or trade with another; (iii) checking for completeness of the shop drawings; and (iv) providing direction on any changes that may be required for compliance with the Contract Documents for submission to the Consultant and review of the shop drawings. The mechanical and electrical coordinators shall be active participants in the Commissioning and shall work closely with the Commissioning Agents in accordance with Schedule 9 – Commissioning Program. The mechanical and electrical coordinators shall be Key Personnel in accordance with Section 8.4. (b) The supervisor and project manager appointed by Project Co and identified in Schedule 7 – Key Personnel, shall represent Project Co at the Site and shall have full authority to act on written instructions given by the Consultant, Owner and/or the Owner’s Project Manager. Instructions given to the supervisor or the project manager shall be deemed to have been given to Project Co and both the supervisor and any project manager shall have full authority to act on behalf of Project Co and bind Project Co in matters related to this Project Agreement.

Supervisors. (a) Project Co shall employ competent supervisors and necessary assistants who shall be in attendance at the Site while work is being performed, and shall specifically include a competent mechanical and electrical coordinator and equipment coordinator. Project Co acknowledges that the supervisors are Key Personnel in accordance with Section 8.4. Project Co’s supervisors shall, subject to Section 8.4, devote their full time during working hours to the Project and remain at the Site until the Substantial Completion of the Work is achieved and thereafter, such supervisors shall, subject to the provisions of Section 8.4, devote sufficient time and effort to the Project as necessary until the final certificate of payment has been issued by the Consultant and all Minor Deficiencies have been rectified. Project Co shall include in its staff separate qualified mechanical and electrical coordinators who shall be responsible for (i) coordinating the general, mechanical and electrical shop drawings submitted by the Subcontractors and Suppliers for various trades or divisions of the Work; (ii) checking for any conflicts or interferences of the Work of one division or trade with another; (iii) checking for completeness of the shop drawings; and (iv) providing direction on any changes that may be required for compliance with the Contract Documents for submission to the Consultant and review of the shop drawings. The mechanical and electrical coordinators shall be active participants in the Commissioning and shall work closely with the Commissioning Agents in accordance with Schedule 9 – Commissioning Program. The mechanical and electrical coordinators shall be Key Personnel in accordance with Section 8.4. (b) The supervisor and project manager appointed by Project Co and identified in Schedule 7 – Key Personnel, shall represent Project Co at the Site and shall have full authority to act on written instructions given by the Consultant, Owner and/or the Owner’s Project Manager. Instructions given to the supervisor or the project manager shall be deemed to have been given to Project Co and both the supervisor and any project manager shall have full authority to act on behalf of Project Co and bind Project Co in matters related to this Project Agreement.Project

Supervisors. (a) Project Co shall employ competent supervisors and necessary assistants who shall be in attendance at the Site while work is being performed, and shall specifically include a competent mechanical and electrical coordinator and equipment coordinator. Project Co acknowledges that the supervisors are Key Personnel in accordance with Section 8.4. Project Co’s supervisors shall, subject to Section 8.4, devote their full time during working hours to the Project and remain at the Site until the Substantial Completion of the Work is achieved and thereafter, such supervisors shall, subject to the provisions of Section 8.4, devote sufficient time and effort to the Project as necessary until the final certificate of payment has been issued by the Consultant and all Minor Deficiencies have been rectified. Project Co shall include in its staff separate qualified mechanical and electrical coordinators who shall be responsible for (i) coordinating the general, mechanical and electrical shop drawings submitted by the Subcontractors and Suppliers for various trades or divisions of the Work; (ii) checking for any conflicts or interferences of the Work of one division or trade with another; (iii) checking for completeness of the shop drawings; and (iv) providing direction on any changes that may be required for compliance with the Contract Documents for submission to the Consultant and review of the shop drawings. The mechanical and electrical coordinators shall be active participants in the Commissioning and shall work closely with the Commissioning Agents in accordance with Schedule 9 – Commissioning Program. The mechanical and electrical coordinators shall be Key Personnel in accordance with Section 8.4. (b) The supervisor and project manager appointed by Project Co and identified in Schedule 7 – Key Personnel, shall represent Project Co at the Site and shall have full authority to act on written instructions given by the Consultant, Owner CMH and/or the OwnerCMH’s Project Manager. Instructions given to the supervisor or the project manager shall be deemed to have been given to Project Co and both the supervisor and any project manager shall have full authority to act on behalf of Project Co and bind Project Co in matters related to this Project Agreement.

Supervisors. (a) Project Co shall employ competent supervisors and necessary assistants who shall be in attendance at the Site while work is being performed, and shall specifically include a competent mechanical and electrical coordinator and equipment coordinator. Project Co acknowledges that the supervisors are Key Personnel in accordance with Section 8.4. Project Co’s supervisors shall, subject to Section 8.4, devote their full time during working hours to the Project and remain at the Site until the Substantial Completion of the Work is achieved and thereafter, such supervisors shall, subject to the provisions of Section 8.4, devote sufficient time and effort to the Project as necessary until the final certificate of payment has been issued by the Consultant and all Minor Deficiencies have been rectified. Project Co shall include in its staff separate qualified mechanical and electrical coordinators who shall be responsible for (i) coordinating the general, mechanical and electrical shop drawings submitted by the Subcontractors and Suppliers for various trades or divisions of the Work; (ii) checking for any conflicts or interferences of the Work of one division or trade with another; (iii) checking for completeness of the shop drawings; and (iv) providing direction on any changes that may be required for compliance with the Contract Documents for submission to the Consultant and review of the shop drawings. The mechanical and electrical coordinators shall be active participants in the Commissioning and shall work closely with the Commissioning Agents in accordance with Schedule 9 – Commissioning Program. The mechanical and electrical coordinators shall be Key Personnel in accordance with Section 8.4. (b) The supervisor and project manager appointed by Project Co and identified in Schedule 7 – Key Personnel, shall represent Project Co at the Site and shall have full authority to act on written instructions given by the Consultant, Owner UOHI and/or the OwnerUOHI’s Project Manager. Instructions given to the supervisor or the project manager shall be deemed to have been given to Project Co and both the supervisor and any project manager shall have full authority to act on behalf of Project Co and bind Project Co in matters related to this Project Agreement.

Supervisors. (a) Project Co shall employ competent supervisors and necessary assistants who shall be in attendance at the Site while work is being performed, and shall specifically include a competent mechanical and electrical coordinator and equipment coordinator. Project Co acknowledges that the supervisors are Key Personnel in accordance with Section 8.4. Project Co’s Co‟s supervisors shall, subject to Section 8.4, devote their full time during working hours to the Project and remain at the Site until the Substantial Completion of the Work is achieved and thereafter, such supervisors shall, subject to the provisions of Section 8.4, devote sufficient time and effort to the Project as necessary until the final certificate of payment has been issued by the Consultant and all Minor Deficiencies have been rectified. Project Co shall include in its staff separate qualified mechanical and electrical coordinators who shall be responsible for (i) coordinating the general, mechanical and electrical shop drawings submitted by the Subcontractors and Suppliers for various trades or divisions of the Work; (ii) checking for any conflicts or interferences of the Work of one division or trade with another; (iii) checking for completeness of the shop drawings; and (iv) providing direction on any changes that may be required for compliance with the Contract Documents for submission to the Consultant and review of the shop drawings. The mechanical and electrical coordinators shall be active participants in the Commissioning and shall work closely with the Commissioning Agents in accordance with Schedule 9 – Commissioning Program. The mechanical and electrical coordinators shall be Key Personnel in accordance with Section 8.4. (b) The supervisor and project manager appointed by Project Co and identified in Schedule 7 – Key Personnel, shall represent Project Co at the Site and shall have full authority to act on written instructions given by the Consultant, Owner and/or the Owner’s Owner‟s Project Manager. Instructions given to the supervisor or the project manager shall be deemed to have been given to Project Co and both the supervisor and any project manager shall have full authority to act on behalf of Project Co and bind Project Co in matters related to this Project Agreement.

Supervisors. (a) Project Co shall employ competent supervisors and necessary assistants who shall be in attendance at the Site while work is being performed, and shall specifically include a competent mechanical and electrical coordinator and equipment coordinator. Project Co acknowledges that the supervisors are Key Personnel in accordance with Section 8.4. Project Co’s supervisors shall, subject to Section 8.4, devote their full time during working hours to the Project and remain at the Site until the Substantial Completion of the Work is achieved and thereafter, such supervisors shall, subject to the provisions of Section 8.4, devote sufficient time and effort to the Project as necessary until the final certificate of payment has been issued by the Consultant and all Minor Deficiencies have been rectified. Project Co shall include in its staff separate qualified mechanical and electrical coordinators who shall be responsible for (i) coordinating the general, mechanical and electrical shop drawings submitted by the Subcontractors and Suppliers for various trades or divisions of the Work; (ii) checking for any conflicts or or‌ interferences of the Work of one division or trade with another; (iii) checking for completeness of the shop drawings; and (iv) providing direction on any changes that may be required for compliance with the Contract Documents for submission to the Consultant and review of the shop drawings. The mechanical and electrical coordinators shall be active participants in the Commissioning and shall work closely with the Commissioning Agents in accordance with Schedule 9 – Commissioning Program. The mechanical and electrical coordinators shall be Key Personnel in accordance with Section 8.4. (b) The supervisor and project manager appointed by Project Co and identified in Schedule 7 – Key Personnel, shall represent Project Co at the Site and shall have full authority to act on written instructions given by the Consultant, Owner THP and/or the OwnerTHP’s Project Manager. Instructions given to the supervisor or the project manager shall be deemed to have been given to Project Co and both the supervisor and any project manager shall have full authority to act on behalf of Project Co and bind Project Co in matters related to this Project Agreement.

Supervisors. (a) Project Co shall employ competent supervisors and necessary assistants who shall be in attendance at the Site Sites while work is being performed, and shall specifically include a competent mechanical and electrical coordinator and equipment coordinator. Project Co acknowledges that the supervisors are Key Personnel in accordance with Section 8.4. Project Co’s supervisors shall, subject to Section 8.4, devote their full time during working hours to the Project Projects and remain at the Site Sites until the Substantial Completion of the Work is achieved and thereafter, such supervisors shall, subject to the provisions of Section 8.4, devote sufficient time and effort to the Project Projects as necessary until the final certificate of payment has been issued by the Consultant and all Minor Deficiencies have been rectified. Project Co shall include in its staff separate qualified mechanical and electrical coordinators who shall be responsible for (i) coordinating the general, mechanical and electrical shop drawings submitted by the Subcontractors and Suppliers for various trades or divisions of the Work; (ii) checking for any conflicts or interferences of the Work of one division or trade with another; (iii) checking for completeness of the shop drawings; and (iv) providing direction on any changes that may be required for compliance with the Contract Documents for submission to the Consultant and review of the shop drawings. The mechanical and electrical coordinators shall be active participants in the Commissioning and shall work closely with the Commissioning Agents in accordance with Schedule 9 – Commissioning Program. The mechanical and electrical coordinators shall be Key Personnel in accordance with Section 8.4. (b) The supervisor and project manager appointed by Project Co and identified in Schedule 7 – Key Personnel, shall represent Project Co at the Site Sites and shall have full authority to act on written instructions given by the Consultant, Owner HMQ and/or the OwnerHMQ’s Project Manager. Instructions given to the supervisor or the project manager shall be deemed to have been given to Project Co and both the supervisor and any project manager shall have full authority to act on behalf of Project Co and bind Project Co in matters related to this Project Agreement.

Supervisors. (a) Project Co shall employ competent supervisors and necessary assistants who shall be in attendance at the Site while work is being performed, and shall specifically include a competent mechanical and electrical coordinator and equipment coordinator. Project Co acknowledges that the supervisors are Key Personnel in accordance with Section 8.4. Project Co’s supervisors shall, subject to Section 8.4, devote their full time during working hours to the Project and remain at the Site until the Substantial Completion of the Work is achieved and thereafter, such supervisors shall, subject to the provisions of Section 8.4, devote sufficient time and effort to the Project as necessary until the final certificate of payment has been issued by the Consultant and all Minor Deficiencies have been rectified. Project Co shall include in its staff separate qualified mechanical and electrical coordinators who shall be responsible for (i) coordinating the general, mechanical and electrical shop drawings submitted by the Subcontractors and Suppliers for various trades or divisions of the Work; (ii) checking for any conflicts or interferences of the Work of one division or trade with another; (iii) checking for completeness of the shop drawings; and (iv) providing direction on any changes that may be required for compliance with the Contract Documents for submission to the Consultant and review of the shop drawings. The mechanical and electrical coordinators shall be active participants in the Commissioning and shall work closely with the Commissioning Agents in accordance with Schedule 9 – Commissioning Program. The mechanical and electrical coordinators shall be Key Personnel in accordance with Section 8.4. (b) The supervisor and project manager appointed by Project Co and identified in Schedule 7 – Key Personnel, shall represent Project Co at the Site and shall have full authority to act on written instructions given by the Consultant, Owner CHH and/or the OwnerCHH’s Project Manager. Instructions given to the supervisor or the project manager shall be deemed to have been given to Project Co and both the supervisor and any project manager shall have full authority to act on behalf of Project Co and bind Project Co in matters related to this Project Agreement.

Supervisors. (a) Project Co shall employ competent supervisors and necessary assistants who shall be in attendance at the Site while work is being performed, and shall specifically include a competent mechanical and electrical coordinator and equipment coordinator. Project Co acknowledges that the supervisors are Key Personnel in accordance with Section 8.4. Project Co’s supervisors shall, subject to Section 8.4, devote their full time during working hours to the Project and remain at the Site until the Substantial Completion of the Work is achieved and thereafter, such supervisors shall, subject to the provisions of Section 8.4, devote sufficient time and effort to the Project as necessary until the final certificate of payment has been issued by the Consultant and all Minor Deficiencies have been rectified. Project Co shall include in its staff separate qualified mechanical and electrical coordinators who shall be responsible for (i) coordinating the general, mechanical and electrical shop drawings submitted by the Subcontractors and Suppliers for various trades or divisions of the Work; (ii) checking for any conflicts or interferences of the Work of one division or trade with another; (iii) checking for completeness of the shop drawings; and (iv) providing direction on any changes that may be required for compliance with the Contract Documents for submission to the Consultant and review of the shop drawings. The mechanical and electrical coordinators shall be active participants in the Commissioning and shall work closely with the Commissioning Agents in accordance with Schedule 9 – Commissioning Program. The mechanical and electrical coordinators shall be Key Personnel in accordance with Section 8.4.8.4.‌ (b) The supervisor and project manager appointed by Project Co and identified in Schedule 7 – Key Personnel, shall represent Project Co at the Site and shall have full authority to act on written instructions given by the Consultant, Owner STEGH and/or the OwnerSTEGH’s Project Manager. Instructions given to the supervisor or the project manager shall be deemed to have been given to Project Co and both the supervisor and any project manager shall have full authority to act on behalf of Project Co and bind Project Co in matters related to this Project Agreement.