Supplementary Technical Specifications. General Technical Specifications All the items of work shall be executed as per PWD Specifications. Any item or part of the item not covered in PWD Specifications shall be executed as per relevant IS Codes or CPWD Specifications or as per the directions of Concessioning Authority /PRTC. The design of facilities for the handicapped and the disabled people, like the toilets, bathrooms, ramps shall be designed as per the respective IS Codes and guidelines issued by Govt. of India or Govt. of Punjab. These codes and specifications shall deem to be bound in this document. The technical specifications for Civil, Mechanical and Electrical installations works are detailed in the subsequent sections. Supplementary Technical Specifications This part shall comprise various amendments/modifications/additions to the relevant codes and standards. When an Amended/Modified/Added clause supersedes a clause or part thereof in the said specifications, then any reference to the superseded clause shall be deemed to refer to the Amended/Modified clause or part thereof. In so far as any Amended/Modified/Added clause may come in conflict or be inconsistent with any of the provisions of the said specifications under reference, the Amended/Modified/Added clause shall always prevail. While carrying out any work the Concessionaire shall ensure that any requirements specific to the site and similar factors are kept in view. All measurements shall be made in the metric system. The measurements and computations unless/otherwise indicated shall be carried nearest to the following limits. Length and breadth : 5 mm Height, Depth or thickness : 1 mm Area : 0.01 sq.m. CubicContents : 0.01cu.m.
Supplementary Technical Specifications. The Supplementary Technical Specifications shall comprise of various Amendments/Modifications/ Additions to the "SPECIFICATIONS FOR ROAD AND BRIDGE WORKS" referred to in Part-I above and Additional Specifications for item of works which are not covered in Part-I.
