Common use of TASKS TO BE COMPLETED Clause in Contracts

TASKS TO BE COMPLETED. a. Aerial Photography The Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. The Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project. b. DGN, DTM and TIN Files The Surveyor shall prepare DGN, DTM and TIN files covering the specific work location, meeting standards and specifications as required. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50 I. Horizontal Ground Control Accuracy Standards The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. II. Vertical Ground Control Accuracy Standards The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. III. Map Accuracy Standard Aerial mapping must meet or exceed the requirements for ASPRS Class 1 standard for 1” = 40’ scale mapping with a one foot contour interval. Field verification of adherence to the required accuracy specification is at the discretion of the State. IV. Statement of Map Accuracy For maps that are not field checked but have been compiled to meet the State’s accuracy standard, the Surveyor shall include the following statement along with the Photogrammetrist’s seal on the delivered hard copy and digital versions of the map: “This map was compiled to meet the ASPRS Standard for Class 1 map accuracy.” If the map was checked and found to conform to this spatial accuracy standard, the statement above and the following statement must also be included on the delivered hard copy and digital versions of the map, and in the field check summary: “This map was checked and found to conform to the ASPRS Standard for Class 1 map accuracy.” V. DGN File Specifications • Files must be fully compatible with the State’s MicroStation graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50 VI. DTM and TIN Files Specifications • Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. • Files must be capable of plotting maps to a 1 inch = 50 feet scale with the smallest text size being one tenth of one inch (1/10”).

TASKS TO BE COMPLETED. a. Aerial Photography The Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards •  The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. •  The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. DocuSign Envelope ID: 805C1060-95ED-4633-B0B2-838F2B4C8721 The Surveyor shall provide: •  Digital Orthophotos on CD or DVD. •  A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project. b. DGN, DTM and TIN Files The Surveyor shall prepare DGN, DTM and TIN files covering the specific work location, meeting standards and specifications as required. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50. I. i. Horizontal Ground Control Accuracy Standards The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIii. Vertical Ground Control Accuracy Standards The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIIiii. Map Accuracy Standard Aerial mapping must meet or exceed the requirements for ASPRS Class 1 standard for 1” = 40’ scale mapping with a one foot contour interval. Field verification of adherence to the required accuracy specification is at the discretion of the State. IViv. Statement of Map Accuracy For maps that are not field checked but have been compiled to meet the State’s accuracy standard, the Surveyor shall include the following statement along with the Photogrammetrist’s seal on the delivered hard copy and digital versions of the map: DocuSign Envelope ID: 805C1060-95ED-4633-B0B2-838F2B4C8721 “This map was compiled to meet the ASPRS Standard for Class 1 map accuracy.” If the map was checked and found to conform to this spatial accuracy standard, the statement above and the following statement must also be included on the delivered hard copy and digital versions of the map, and in the field check summary: “This map was checked and found to conform to the ASPRS Standard for Class 1 map accuracy.” V. v. DGN File Specifications •  Files must be fully compatible with the State’s MicroStation graphics system without further modification or conversion. •  File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. vi. DTM and TIN Files Specifications  Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion.  File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50 VI. DTM and TIN Files Specifications • Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. •  Files must be capable of plotting maps to a 1 inch = 50 feet scale with the smallest text size being one tenth of one inch (1/10”).

TASKS TO BE COMPLETED. a. Aerial Photography The Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards •  The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. •  The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. WAs Used DocuSign Envelope ID: 90FFDF48-FE33-4BE1-8ADC-C0A4A25F26F5 The Surveyor shall provide: •  Digital Orthophotos on CD or DVD. •  A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project. b. DGN, DTM and TIN Files The Surveyor shall prepare DGN, DTM and TIN files covering the specific work location, meeting standards and specifications as required. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50. I. i. Horizontal Ground Control Accuracy Standards The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIii. Vertical Ground Control Accuracy Standards The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIIiii. Map Accuracy Standard Aerial mapping must meet or exceed the requirements for ASPRS Class 1 standard for 1” = 40’ scale mapping with a one foot contour interval. Field verification of adherence to the required accuracy specification is at the discretion of the State. IViv. Statement of Map Accuracy For maps that are not field checked but have been compiled to meet the State’s accuracy standard, the Surveyor shall include the following statement along with the Photogrammetrist’s seal on the delivered hard copy and digital versions of the map: WAs Used DocuSign Envelope ID: 90FFDF48-FE33-4BE1-8ADC-C0A4A25F26F5 “This map was compiled to meet the ASPRS Standard for Class 1 map accuracy.” If the map was checked and found to conform to this spatial accuracy standard, the statement above and the following statement must also be included on the delivered hard copy and digital versions of the map, and in the field check summary: “This map was checked and found to conform to the ASPRS Standard for Class 1 map accuracy.” V. v. DGN File Specifications •  Files must be fully compatible with the State’s MicroStation graphics system without further modification or conversion. •  File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. vi. DTM and TIN Files Specifications  Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion.  File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50 VI. DTM and TIN Files Specifications • Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. •  Files must be capable of plotting maps to a 1 inch = 50 feet scale with the smallest text size being one tenth of one inch (1/10”).. WAs Used DocuSign Envelope ID: 90FFDF48-FE33-4BE1-8ADC-C0A4A25F26F5 The Surveyor shall provide:  DGN, DTM and TIN files on a medium and in a format acceptable to the State, delivered on CD, DVD, flash-drive, or hard-drive.  Orthophotography (created using the DTM) delivered on CD, DVD, flash-drive, or hard-drive in tiff format (3 banded) with world files. If digital, depending on intended use, deliverable formats must include: o Raw tiff image – rectified – 4 Band Tiff (for archive only). o Color photography – rectified – 3 Band Tiff and Mr. Sid. o Infrared Photography – rectified – 3 Band Tiff and Mr. Sid.  The State’s Photogrammetry Mapping Legend and supplements

TASKS TO BE COMPLETED. a. Aerial Photography The Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. DocuSign Envelope ID: E3FDB000-D669-4793-A755-503701F99702 PeopleSoft Contract No. 8607 Legacy Contract No. 12-8IDP1023 The Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project. b. DGN, DTM and TIN Files The Surveyor shall prepare DGN, DTM and TIN files covering the specific work location, meeting standards and specifications as required. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50. I. i. Horizontal Ground Control Accuracy Standards The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIii. Vertical Ground Control Accuracy Standards The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIIiii. Map Accuracy Standard Aerial mapping must meet or exceed the requirements for ASPRS Class 1 standard for 1” = 40’ scale mapping with a one foot contour interval. Field verification of adherence to the required accuracy specification is at the discretion of the State. IViv. Statement of Map Accuracy For maps that are not field checked but have been compiled to meet the State’s accuracy standard, the Surveyor shall include DocuSign Envelope ID: E3FDB000-D669-4793-A755-503701F99702 PeopleSoft Contract No. 8607 Legacy Contract No. 12-8IDP1023 the following statement along with the Photogrammetrist’s seal on the delivered hard copy and digital versions of the map: “This map was compiled to meet the ASPRS Standard for Class 1 map accuracy.” If the map was checked and found to conform to this spatial accuracy standard, the statement above and the following statement must also be included on the delivered hard copy and digital versions of the map, and in the field check summary: “This map was checked and found to conform to the ASPRS Standard for Class 1 map accuracy.” V. v. DGN File Specifications • Files must be fully compatible with the State’s MicroStation graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50 VI. vi. DTM and TIN Files Specifications • Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. • Files must be capable of plotting maps to a 1 inch = 50 feet scale with the smallest text size being one tenth of one inch (1/10”).

TASKS TO BE COMPLETED. a. Aerial Photography The Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards •  The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. •  The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. DocuSign Envelope ID: C10691C7-E673-4544-A340-5ADD28C1973F The Surveyor shall provide: •  Digital Orthophotos on CD or DVD. •  A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project. b. DGN, DTM and TIN Files The Surveyor shall prepare DGN, DTM and TIN files covering the specific work location, meeting standards and specifications as required. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50. I. i. Horizontal Ground Control Accuracy Standards The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIii. Vertical Ground Control Accuracy Standards The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIIiii. Map Accuracy Standard Aerial mapping must meet or exceed the requirements for ASPRS Class 1 standard for 1” = 40’ scale mapping with a one foot contour interval. Field verification of adherence to the required accuracy specification is at the discretion of the State. IViv. Statement of Map Accuracy For maps that are not field checked but have been compiled to meet the State’s accuracy standard, the Surveyor shall include the following statement along with the Photogrammetrist’s seal on the delivered hard copy and digital versions of the map: DocuSign Envelope ID: C10691C7-E673-4544-A340-5ADD28C1973F “This map was compiled to meet the ASPRS Standard for Class 1 map accuracy.” If the map was checked and found to conform to this spatial accuracy standard, the statement above and the following statement must also be included on the delivered hard copy and digital versions of the map, and in the field check summary: “This map was checked and found to conform to the ASPRS Standard for Class 1 map accuracy.” V. v. DGN File Specifications •  Files must be fully compatible with the State’s MicroStation graphics system without further modification or conversion. •  File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. vi. DTM and TIN Files Specifications  Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion.  File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50 VI. DTM and TIN Files Specifications • Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. •  Files must be capable of plotting maps to a 1 inch = 50 feet scale with the smallest text size being one tenth of one inch (1/10”).

TASKS TO BE COMPLETED. a. Aerial Photography The Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. DocuSign Envelope ID: 34ABC29C-D1A8-49E0-BF33-E68A391DD60F The Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project. b. DGN, DTM and TIN Files The Surveyor shall prepare DGN, DTM and TIN files covering the specific work location, meeting standards and specifications as required. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50. I. i. Horizontal Ground Control Accuracy Standards The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIii. Vertical Ground Control Accuracy Standards The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIIiii. Map Accuracy Standard Aerial mapping must meet or exceed the requirements for ASPRS Class 1 standard for 1” = 40’ scale mapping with a one foot contour interval. Field verification of adherence to the required accuracy specification is at the discretion of the State. IViv. Statement of Map Accuracy For maps that are not field checked but have been compiled to meet the State’s accuracy standard, the Surveyor shall include the following statement along with the Photogrammetrist’s seal on the delivered hard copy and digital versions of the map: DocuSign Envelope ID: 34ABC29C-D1A8-49E0-BF33-E68A391DD60F “This map was compiled to meet the ASPRS Standard for Class 1 map accuracy.” If the map was checked and found to conform to this spatial accuracy standard, the statement above and the following statement must also be included on the delivered hard copy and digital versions of the map, and in the field check summary: “This map was checked and found to conform to the ASPRS Standard for Class 1 map accuracy.” V. v. DGN File Specifications • Files must be fully compatible with the State’s MicroStation graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50 VI. vi. DTM and TIN Files Specifications • Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. • Files must be capable of plotting maps to a 1 inch = 50 feet scale with the smallest text size being one tenth of one inch (1/10”).

TASKS TO BE COMPLETED. a. Aerial Photography The Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. The Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project. b. DGN, DTM and TIN Files The Surveyor shall prepare DGN, DTM and TIN files covering the specific work location, meeting standards and specifications as required. DocuSign Envelope ID: 5CB7751CAC2C7EE9-E6D06BF9-4DE24102-9AFC-6147ABA0BF50B25A-1F15BB52CCCF I. Horizontal Ground Control Accuracy Standards The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. II. Vertical Ground Control Accuracy Standards The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. III. Map Accuracy Standard Aerial mapping must meet or exceed the requirements for ASPRS Class 1 standard for 1” = 40’ scale mapping with a one foot contour interval. Field verification of adherence to the required accuracy specification is at the discretion of the State. IV. Statement of Map Accuracy For maps that are not field checked but have been compiled to meet the State’s accuracy standard, the Surveyor shall include the following statement along with the Photogrammetrist’s seal on the delivered hard copy and digital versions of the map: “This map was compiled to meet the ASPRS Standard for Class 1 map accuracy.” If the map was checked and found to conform to this spatial accuracy standard, the statement above and the following statement must also be included on the delivered hard copy and digital versions of the map, and in the field check summary: “This map was checked and found to conform to the ASPRS Standard for Class 1 map accuracy.” V. DGN File Specifications • Files must be fully compatible with the State’s MicroStation graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. DocuSign Envelope ID: 5CB7751CAC2C7EE9-E6D06BF9-4DE24102-9AFC-6147ABA0BF50 B25A-1F15BB52CCCF VI. DTM and TIN Files Specifications • Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. • Files must be capable of plotting maps to a 1 inch = 50 feet scale with the smallest text size being one tenth of one inch (1/10”).

TASKS TO BE COMPLETED. a. Aerial Photography The Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology DocuSign Envelope ID: 9A5E574C-F6F1-4EA5-A0CA-CDE46BF87198 The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. The Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project. b. DGN, DTM and TIN Files The Surveyor shall prepare DGN, DTM and TIN files covering the specific work location, meeting standards and specifications as required. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50. I. i. Horizontal Ground Control Accuracy Standards The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIii. Vertical Ground Control Accuracy Standards The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIIiii. Map Accuracy Standard Aerial mapping must meet or exceed the requirements for ASPRS Class 1 standard for 1” = 40’ scale mapping with a one foot contour interval. Field verification of adherence to the required accuracy specification is at the discretion of the State. IViv. Statement of Map Accuracy DocuSign Envelope ID: 9A5E574C-F6F1-4EA5-A0CA-CDE46BF87198 For maps that are not field checked but have been compiled to meet the State’s accuracy standard, the Surveyor shall include the following statement along with the Photogrammetrist’s seal on the delivered hard copy and digital versions of the map: “This map was compiled to meet the ASPRS Standard for Class 1 map accuracy.” If the map was checked and found to conform to this spatial accuracy standard, the statement above and the following statement must also be included on the delivered hard copy and digital versions of the map, and in the field check summary: “This map was checked and found to conform to the ASPRS Standard for Class 1 map accuracy.” V. v. DGN File Specifications • Files must be fully compatible with the State’s MicroStation graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50 VI. vi. DTM and TIN Files Specifications • Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. • Files must be capable of plotting maps to a 1 inch = 50 feet scale with the smallest text size being one tenth of one inch (1/10”).. DocuSign Envelope ID: 9A5E574C-F6F1-4EA5-A0CA-CDE46BF87198 The Surveyor shall provide: • DGN, DTM and TIN files on a medium and in a format acceptable to the State, delivered on CD, DVD, flash-drive, or hard-drive. • Orthophotography (created using the DTM) delivered on CD, DVD, flash-drive, or hard-drive in tiff format (3 banded) with world files. If digital, depending on intended use, deliverable formats must include: o Raw tiff image – rectified – 4 Band Tiff (for archive only). o Color photography – rectified – 3 Band Tiff and Mr. Sid. o Infrared Photography – rectified – 3 Band Tiff and Mr. Sid. • The State’s Photogrammetry Mapping Legend and supplements

TASKS TO BE COMPLETED. a. Aerial Photography The Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. The Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project. b. DGN, DTM and TIN Files The Surveyor shall prepare DGN, DTM and TIN files covering the specific work location, meeting standards and specifications as required. DocuSign Envelope ID: 5CB7751C268EB37E-8EC6-E6D041D6-4DE2B053-9AFC-6147ABA0BF508569192F499C I. Horizontal Ground Control Accuracy Standards The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. II. Vertical Ground Control Accuracy Standards The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. III. Map Accuracy Standard Aerial mapping must meet or exceed the requirements for ASPRS Class 1 standard for 1” = 40’ scale mapping with a one foot contour interval. Field verification of adherence to the required accuracy specification is at the discretion of the State. IV. Statement of Map Accuracy For maps that are not field checked but have been compiled to meet the State’s accuracy standard, the Surveyor shall include the following statement along with the Photogrammetrist’s seal on the delivered hard copy and digital versions of the map: “This map was compiled to meet the ASPRS Standard for Class 1 map accuracy.” If the map was checked and found to conform to this spatial accuracy standard, the statement above and the following statement must also be included on the delivered hard copy and digital versions of the map, and in the field check summary: “This map was checked and found to conform to the ASPRS Standard for Class 1 map accuracy.” V. DGN File Specifications • Files must be fully compatible with the State’s MicroStation graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. DocuSign Envelope ID: 5CB7751C268EB37E-8EC6-E6D041D6-4DE2B053-9AFC-6147ABA0BF50 8569192F499C VI. DTM and TIN Files Specifications • Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. • Files must be capable of plotting maps to a 1 inch = 50 feet scale with the smallest text size being one tenth of one inch (1/10”).

TASKS TO BE COMPLETED. a. Aerial Photography The Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. DocuSign Envelope ID: D07A0388-BFA6-4782-A817-F6DF713498D1 The Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project. b. DGN, DTM and TIN Files The Surveyor shall prepare DGN, DTM and TIN files covering the specific work location, meeting standards and specifications as required. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50. I. i. Horizontal Ground Control Accuracy Standards The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIii. Vertical Ground Control Accuracy Standards The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIIiii. Map Accuracy Standard Aerial mapping must meet or exceed the requirements for ASPRS Class 1 standard for 1” = 40’ scale mapping with a one foot contour interval. Field verification of adherence to the required accuracy specification is at the discretion of the State. IViv. Statement of Map Accuracy For maps that are not field checked but have been compiled to meet the State’s accuracy standard, the Surveyor shall include DocuSign Envelope ID: D07A0388-BFA6-4782-A817-F6DF713498D1 the following statement along with the Photogrammetrist’s seal on the delivered hard copy and digital versions of the map: “This map was compiled to meet the ASPRS Standard for Class 1 map accuracy.” If the map was checked and found to conform to this spatial accuracy standard, the statement above and the following statement must also be included on the delivered hard copy and digital versions of the map, and in the field check summary: “This map was checked and found to conform to the ASPRS Standard for Class 1 map accuracy.” V. v. DGN File Specifications • Files must be fully compatible with the State’s MicroStation graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50 VI. vi. DTM and TIN Files Specifications • Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. • Files must be capable of plotting maps to a 1 inch = 50 feet scale with the smallest text size being one tenth of one inch (1/10”).

TASKS TO BE COMPLETED. a. Aerial Photography The Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. The Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project. b. DGN, DTM and TIN Files The Surveyor shall prepare DGN, DTM and TIN files covering the specific work location, meeting standards and specifications as required. DocuSign Envelope ID: 5CB7751C89EF8577-E6D0E141-4DE24A85-9AFC-6147ABA0BF50AE8D-4806D3402448 I. Horizontal Ground Control Accuracy Standards The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. II. Vertical Ground Control Accuracy Standards The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. III. Map Accuracy Standard Aerial mapping must meet or exceed the requirements for ASPRS Class 1 standard for 1” = 40’ scale mapping with a one foot contour interval. Field verification of adherence to the required accuracy specification is at the discretion of the State. IV. Statement of Map Accuracy For maps that are not field checked but have been compiled to meet the State’s accuracy standard, the Surveyor shall include the following statement along with the Photogrammetrist’s seal on the delivered hard copy and digital versions of the map: “This map was compiled to meet the ASPRS Standard for Class 1 map accuracy.” If the map was checked and found to conform to this spatial accuracy standard, the statement above and the following statement must also be included on the delivered hard copy and digital versions of the map, and in the field check summary: “This map was checked and found to conform to the ASPRS Standard for Class 1 map accuracy.” V. DGN File Specifications • Files must be fully compatible with the State’s MicroStation graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. DocuSign Envelope ID: 5CB7751C89EF8577-E6D0E141-4DE24A85-9AFC-6147ABA0BF50 AE8D-4806D3402448 VI. DTM and TIN Files Specifications • Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. • Files must be capable of plotting maps to a 1 inch = 50 feet scale with the smallest text size being one tenth of one inch (1/10”).

TASKS TO BE COMPLETED. a. Aerial Photography The Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology DocuSign Envelope ID: A1F83282-27A1-4756-AFA4-EB689A1E9938 The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. The Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project. b. DGN, DTM and TIN Files The Surveyor shall prepare DGN, DTM and TIN files covering the specific work location, meeting standards and specifications as required. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50. I. i. Horizontal Ground Control Accuracy Standards The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIii. Vertical Ground Control Accuracy Standards The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIIiii. Map Accuracy Standard Aerial mapping must meet or exceed the requirements for ASPRS Class 1 standard for 1” = 40’ scale mapping with a one foot contour interval. Field verification of adherence to the required accuracy specification is at the discretion of the State.. DocuSign Envelope ID: A1F83282-27A1-4756-AFA4-EB689A1E9938 IViv. Statement of Map Accuracy For maps that are not field checked but have been compiled to meet the State’s accuracy standard, the Surveyor shall include the following statement along with the Photogrammetrist’s seal on the delivered hard copy and digital versions of the map: “This map was compiled to meet the ASPRS Standard for Class 1 map accuracy.” If the map was checked and found to conform to this spatial accuracy standard, the statement above and the following statement must also be included on the delivered hard copy and digital versions of the map, and in the field check summary: “This map was checked and found to conform to the ASPRS Standard for Class 1 map accuracy.” V. v. DGN File Specifications • Files must be fully compatible with the State’s MicroStation graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50 VI. vi. DTM and TIN Files Specifications • Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. • Files must be capable of plotting maps to a 1 inch = 50 feet scale with the smallest text size being one tenth of one inch (1/10”).. DocuSign Envelope ID: A1F83282-27A1-4756-AFA4-EB689A1E9938 The Surveyor shall provide: • DGN, DTM and TIN files on a medium and in a format acceptable to the State, delivered on CD, DVD, flash-drive, or hard-drive. • Orthophotography (created using the DTM) delivered on CD, DVD, flash-drive, or hard-drive in tiff format (3 banded) with world files. If digital, depending on intended use, deliverable formats must include: o Raw tiff image – rectified – 4 Band Tiff (for archive only). o Color photography – rectified – 3 Band Tiff and Mr. Sid. o Infrared Photography – rectified – 3 Band Tiff and Mr. Sid. • The State’s Photogrammetry Mapping Legend and supplements

TASKS TO BE COMPLETED. a. Aerial Photography The Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. DocuSign Envelope ID: 5FD760D7-BA19-4EE1-B8A0-F9C4A93AB705 The Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project. b. DGN, DTM and TIN Files The Surveyor shall prepare DGN, DTM and TIN files covering the specific work location, meeting standards and specifications as required. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50. I. i. Horizontal Ground Control Accuracy Standards The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIii. Vertical Ground Control Accuracy Standards The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIIiii. Map Accuracy Standard Aerial mapping must meet or exceed the requirements for ASPRS Class 1 standard for 1” = 40’ scale mapping with a one foot contour interval. Field verification of adherence to the required accuracy specification is at the discretion of the State. IViv. Statement of Map Accuracy For maps that are not field checked but have been compiled to meet the State’s accuracy standard, the Surveyor shall include DocuSign Envelope ID: 5FD760D7-BA19-4EE1-B8A0-F9C4A93AB705 the following statement along with the Photogrammetrist’s seal on the delivered hard copy and digital versions of the map: “This map was compiled to meet the ASPRS Standard for Class 1 map accuracy.” If the map was checked and found to conform to this spatial accuracy standard, the statement above and the following statement must also be included on the delivered hard copy and digital versions of the map, and in the field check summary: “This map was checked and found to conform to the ASPRS Standard for Class 1 map accuracy.” V. v. DGN File Specifications • Files must be fully compatible with the State’s MicroStation graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50 VI. vi. DTM and TIN Files Specifications • Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. • Files must be capable of plotting maps to a 1 inch = 50 feet scale with the smallest text size being one tenth of one inch (1/10”).

TASKS TO BE COMPLETED. a. Aerial Photography The Surveyor shall provide aerial photography for low altitude aerial mapping appropriate for detailed design. i. Ground Control Accuracy Standards • The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. • The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. ii. Paneling Placement Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State. iii. Aerial Photography Standards and Specifications For purposes of this Contract, all standards and specifications shall be in accordance with established guidelines and recommended or approved by the State.. DocuSign Envelope ID: B8B3CD6B-A26C-4D40-A13B-9771D9AA4591 iv. LiDAR Technology The use of LiDAR Technology (mobile, terrestrial or aerial) will be acceptable when approved by the State and the accuracies of the specified tasks it will be used for are met or exceeded. The Surveyor shall provide: • Digital Orthophotos on CD or DVD. • A photo index of the scanned aerial film frames or digital image frames for each frame of photography in the project. b. DGN, DTM and TIN Files The Surveyor shall prepare DGN, DTM and TIN files covering the specific work location, meeting standards and specifications as required. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50. I. i. Horizontal Ground Control Accuracy Standards The Surveyor shall provide horizontal ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIii. Vertical Ground Control Accuracy Standards The Surveyor shall provide vertical ground control that meets standards of accuracy required by the State and as described in the TxDOT Survey Manual, latest edition, or the TSPS Manual of Practice for Land Surveying in the State of Texas, as may be applicable. IIIiii. Map Accuracy Standard Aerial mapping must meet or exceed the requirements for ASPRS Class 1 standard for 1” = 40’ scale mapping with a one foot contour interval. Field verification of adherence to the required accuracy specification is at the discretion of the State.. DocuSign Envelope ID: B8B3CD6B-A26C-4D40-A13B-9771D9AA4591 IViv. Statement of Map Accuracy For maps that are not field checked but have been compiled to meet the State’s accuracy standard, the Surveyor shall include the following statement along with the Photogrammetrist’s seal on the delivered hard copy and digital versions of the map: “This map was compiled to meet the ASPRS Standard for Class 1 map accuracy.” If the map was checked and found to conform to this spatial accuracy standard, the statement above and the following statement must also be included on the delivered hard copy and digital versions of the map, and in the field check summary: “This map was checked and found to conform to the ASPRS Standard for Class 1 map accuracy.” V. v. DGN File Specifications • Files must be fully compatible with the State’s MicroStation graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. DocuSign Envelope ID: 5CB7751C-E6D0-4DE2-9AFC-6147ABA0BF50 VI. vi. DTM and TIN Files Specifications • Files must be fully compatible with the State’s GEOPAK graphics system without further modification or conversion. • File features and level structure must be in compliance with the State’s current Photogrammetry Mapping Legend. • Files must be capable of plotting maps to a 1 inch = 50 feet scale with the smallest text size being one tenth of one inch (1/10”).. DocuSign Envelope ID: B8B3CD6B-A26C-4D40-A13B-9771D9AA4591