Technical Publications. A. Manual of Petroleum Measurement Standards, American Petroleum Institute, Washington, D.C.: 1. API Chapter 1, “Definitions.” Storage Lease (Enterprise North Propane-Propylene Splitters) 2. API Chapter 4, “Proving Systems.” 3. API Chapter 5.3, “Measurement of Liquid Hydrocarbons by Turbine Meters.” 4. API Chapter 5.4, “Accessory Equipment for Liquid Meters.” 5. API Chapter 5.6, “Measurement of Liquid Hydrocarbons by Coriolis Meters.” 6. API Chapter 9.2, “Pressure Hydrometer Test Method for Density or Relative Density.” 7. API Chapter 11.2.2, “Compressibility Factors for Hydrocarbons: 0.350 — 0.637 Relative Density (60 oF/60 oF) and –50 oF to 140 oF Metering Temperature.” 8. API 11.2.1, “Compressibility Factors for Hydrocarbons: 0-90o API Gravity Range.” 9. API Chapter 11.3.3.2, “Propylene Compressibility.” 10. API Chapter 12.2, “Calculation of Liquid Petroleum Quantities.” 11. API Chapter 14.6, “Continuous Density Measurement.” 12. API Chapter 14.7, “Standard for Mass Measurement of Natural Gas Liquids.” 13. API Chapter 14.8, “Liquefied Petroleum Gas Measurement.” 14. API Chapter 21.2, “Flow Measurement — Electronic Liquid Measurement.” B. API/ASTM/GPA Technical Publication TP-25 Table 24E, “Correction of Volume to 60 °F Against Relative Density 60 °F/60 °F.” C. ASTM-D-1250 (Table 24), “Volume Corrected to 60 oF and equilibrium vapor pressure.” D. ASTM-D-2163 “Standard Test Method for Analysis of Liquid Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography.” E. GPA Standard 2140, “Liquefied Petroleum Gas Specifications and Test Methods.” F. GPA Standard 2145, “Table of Physical Constants of Paraffin Hydrocarbons and Other Components of Natural Gas.” G. GPA Standard 2174, “Method of Obtaining Hydrocarbon Fluid Samples Using a Floating Piston Cylinder.” Storage Lease (Enterprise North Propane-Propylene Splitters) H. GPA Standard 2177, “Method for the Analysis of Demethanized Hydrocarbon Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography.” I. GPA Standard 2186, “Method for the Extended Analysis of Hydrocarbon Mixtures Containing Nitrogen and Carbon Dioxide by Temperature Programmed Gas Chromatography.” J. GPA Standard 8173, “Method for Converting Natural Gas Liquids and Vapors to Equivalent Liquid Volumes.” K. GPA Standard 8182, “Tentative Standard for the Mass Measurement of Natural Gas Liquids.” L. References to any API, GPA, ASTM or similar publications shall be deemed to encompass the latest edition, revision or amendment thereof.
Appears in 2 contracts
Samples: Storage Lease (Duncan Energy Partners L.P.), Storage Lease (Duncan Energy Partners L.P.)
Technical Publications. A. Manual of Petroleum Measurement Standards, American Petroleum Institute, Washington, D.C.:
1. API Chapter 1, “Definitions.” Storage Lease (Enterprise North Propane-Propylene Splitters)”
2. API Chapter 4, “Proving Systems.”
3. API Chapter 5.3, “Measurement of Liquid Hydrocarbons by Turbine Meters.”
4. API Chapter 5.4, “Accessory Equipment for Liquid Meters.”
5. API Chapter 5.6, “Measurement of Liquid Hydrocarbons by Coriolis Meters.”
6. API Chapter 9.2, “Pressure Hydrometer Test Method for Density or Relative Density.”
7. API Chapter 11.2.2, “Compressibility Factors for Hydrocarbons: 0.350 — 0.637 Relative Density (60 oF/60 oF) and –50 oF to 140 oF Metering Temperature.”
8. API 11.2.1, “Compressibility Factors for Hydrocarbons: 0-90o API Gravity Range.”
9. API Chapter 11.3.3.2, “Propylene Compressibility.”
10. API Chapter 12.2, “Calculation of Liquid Petroleum Quantities.”
11. API Chapter 14.6, “Continuous Density Measurement.”
12. API Chapter 14.7, “Standard for Mass Measurement of Natural Gas Liquids.”
13. API Chapter 14.8, “Liquefied Petroleum Gas Measurement.”
14. API Chapter 21.2, “Flow Measurement — Electronic Liquid Measurement.”
B. 15. API/ASTM/GPA Technical Publication TP-25 Table 24E, “Correction of Volume to 60 °F Against Relative Density 60 °F/60 °F.”
C. B. ASTM-D-1250 (Table 24), “Volume Corrected to 60 oF and equilibrium vapor pressure.”
D. C. ASTM-D-2163 “Standard Test Method for Analysis of Liquid Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography.”
E. D. GPA Standard 2140, “Liquefied Petroleum Gas Specifications and Test Methods.”
F. E. GPA Standard 2145, “Table of Physical Constants of Paraffin Hydrocarbons and Other Components of Natural Gas.”
G. F. GPA Standard 2174, “Method of Obtaining Hydrocarbon Fluid Samples Using a Floating Piston Cylinder.” Storage Lease (Enterprise North Propane-Propylene Splitters)”
H. G. GPA Standard 2177, “Method for the Analysis of Demethanized Hydrocarbon Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography.”
I. H. GPA Standard 2186, “Method for the Extended Analysis of Hydrocarbon Mixtures Containing Nitrogen and Carbon Dioxide by Temperature Programmed Gas Chromatography.”
J. I. GPA Standard 8173, “Method for Converting Natural Gas Liquids and Vapors to Equivalent Liquid Volumes.”
K. J. GPA Standard 8182, “Tentative Standard for the Mass Measurement of Natural Gas Liquids.”
L. K. References to any API, GPA, ASTM or similar publications shall be deemed to encompass the latest edition, revision or amendment thereof.
Appears in 2 contracts
Samples: Storage Lease (Duncan Energy Partners L.P.), Storage Lease (Duncan Energy Partners L.P.)
Technical Publications. A. Manual of Petroleum Measurement Standards, American Petroleum Institute, Washington, D.C.:
1. API Chapter 1, “Definitions.” Storage Lease (Enterprise North Propane-Propylene Splitters)”
2. API Chapter 4, “Proving Systems.”
3. API Chapter 5.3, “Measurement of Liquid Hydrocarbons by Turbine Meters.”
4. API Chapter 5.4, “Accessory Equipment for Liquid Meters.”
5. API Chapter 5.6, “Measurement of Liquid Hydrocarbons by Coriolis Meters.”
6. API Chapter 9.2, “Pressure Hydrometer Test Method for Density or Relative Density.”
7. API Chapter 11.2.2, “Compressibility Factors for Hydrocarbons: 0.350 — 0.637 Relative Density (60 oF/60 oF) and –50 oF to 140 oF Metering Temperature.”
8. API 11.2.1, “Compressibility Factors for Hydrocarbons: 0-90o API Gravity Range.”
9. API Chapter 11.3.3.2, “Propylene Compressibility.”
10. API Chapter 12.2, “Calculation of Liquid Petroleum Quantities.”
11. API Chapter 14.6, “Continuous Density Measurement.”
12. API Chapter 14.7, “Standard for Mass Measurement of Natural Gas Liquids.”
13. API Chapter 14.8, “Liquefied Petroleum Gas Measurement.”
14. API Chapter 21.2, “Flow Measurement — Electronic Liquid Measurement.”
B. API/ASTM/GPA Technical Publication TP-25 Table 24E, “Correction of Volume to 60 °F Against Relative Density 60 °F/60 °F.”
C. ASTM-D-1250 (Table 24), “Volume Corrected to 60 oF and equilibrium vapor pressure.”
D. ASTM-D-2163 “Standard Test Method for Analysis of Liquid Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography.”
E. GPA Standard 2140, “Liquefied Petroleum Gas Specifications and Test Methods.”” Storage Lease (ENTERPRISE FRACTIONATION PLANT)
F. GPA Standard 2145, “Table of Physical Constants of Paraffin Hydrocarbons and Other Components of Natural Gas.”
G. GPA Standard 2174, “Method of Obtaining Hydrocarbon Fluid Samples Using a Floating Piston Cylinder.” Storage Lease (Enterprise North Propane-Propylene Splitters)”
H. GPA Standard 2177, “Method for the Analysis of Demethanized Hydrocarbon Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography.”
I. GPA Standard 2186, “Method for the Extended Analysis of Hydrocarbon Mixtures Containing Nitrogen and Carbon Dioxide by Temperature Programmed Gas Chromatography.”
J. GPA Standard 8173, “Method for Converting Natural Gas Liquids and Vapors to Equivalent Liquid Volumes.”
K. GPA Standard 8182, “Tentative Standard for the Mass Measurement of Natural Gas Liquids.”
L. References to any API, GPA, ASTM or similar publications shall be deemed to encompass the latest edition, revision or amendment thereof.
Appears in 2 contracts
Samples: Storage Lease (Duncan Energy Partners L.P.), Storage Lease (Duncan Energy Partners L.P.)
Technical Publications. A. Manual of Petroleum Measurement Standards, American Petroleum Institute, Washington, D.C.:
1. API Chapter 1, “Definitions.” Storage Lease (Enterprise North Propane-Propylene Splitters)”
2. API Chapter 4, “Proving Systems.”
3. API Chapter 5.3, “Measurement of Liquid Hydrocarbons by Turbine Meters.”
4. API Chapter 5.4, “Accessory Equipment for Liquid Meters.”
5. API Chapter 5.6, “Measurement of Liquid Hydrocarbons by Coriolis Meters.”
6. API Chapter 9.2, “Pressure Hydrometer Test Method for Density or Relative Density.”
7. API Chapter 11.2.2, “Compressibility Factors for Hydrocarbons: 0.350 — 0.637 Relative Density (60 oF/60 oF) and –50 oF to 140 oF Metering Temperature.”
8. API 11.2.1, “Compressibility Factors for Hydrocarbons: 0-90o API Gravity Range.”
9. API Chapter 11.3.3.2, “Propylene Compressibility.”
10. API Chapter 12.2, “Calculation of Liquid Petroleum Quantities.”
11. API Chapter 14.6, “Continuous Density Measurement.”
12. API Chapter 14.7, “Standard for Mass Measurement of Natural Gas Liquids.”
13. API Chapter 14.8, “Liquefied Petroleum Gas Measurement.”
14. API Chapter 21.2, “Flow Measurement — Electronic Liquid Measurement.”
B. API/ASTM/GPA Technical Publication TP-25 Table 24E, “Correction of Volume to 60 °F Against Relative Density 60 °F/60 °F.”
C. ASTM-D-1250 (Table 24), “Volume Corrected to 60 oF and equilibrium vapor pressure.”
D. ASTM-D-2163 “Standard Test Method for Analysis of Liquid Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography.”
E. GPA Standard 2140, “Liquefied Petroleum Gas Specifications and Test Methods.”” Storage Lease (Enterprise Products NGL Marketing)
F. GPA Standard 2145, “Table of Physical Constants of Paraffin Hydrocarbons and Other Components of Natural Gas.”
G. GPA Standard 2174, “Method of Obtaining Hydrocarbon Fluid Samples Using a Floating Piston Cylinder.” Storage Lease (Enterprise North Propane-Propylene Splitters)”
H. GPA Standard 2177, “Method for the Analysis of Demethanized Hydrocarbon Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography.”
I. GPA Standard 2186, “Method for the Extended Analysis of Hydrocarbon Mixtures Containing Nitrogen and Carbon Dioxide by Temperature Programmed Gas Chromatography.”
J. GPA Standard 8173, “Method for Converting Natural Gas Liquids and Vapors to Equivalent Liquid Volumes.”
K. GPA Standard 8182, “Tentative Standard for the Mass Measurement of Natural Gas Liquids.”
L. References to any API, GPA, ASTM or similar publications shall be deemed to encompass the latest edition, revision or amendment thereof.
Appears in 2 contracts
Samples: Storage Lease (Duncan Energy Partners L.P.), Storage Lease (Duncan Energy Partners L.P.)
Technical Publications. A. Manual of Petroleum Measurement Standards, American Petroleum Institute, Washington, D.C.:
1. API Chapter 1, “Definitions.” Storage Lease (Enterprise North Propane-Propylene Splitters)”
2. API Chapter 4, “Proving Systems.”
3. API Chapter 5.3, “Measurement of Liquid Hydrocarbons by Turbine Meters.”
4. API Chapter 5.4, “Accessory Equipment for Liquid Meters.”
5. API Chapter 5.6, “Measurement of Liquid Hydrocarbons by Coriolis Meters.”
6. API Chapter 9.2, “Pressure Hydrometer Test Method for Density or Relative Density.”
7. API Chapter 11.2.2, “Compressibility Factors for Hydrocarbons: 0.350 — 0.637 Relative Density (60 oF/60 oF) and –50 oF to 140 oF Metering Temperature.”
8. API 11.2.1, “Compressibility Factors for Hydrocarbons: 0-90o API Gravity Range.”
9. API Chapter 11.3.3.2, “Propylene Compressibility.”
10. API Chapter 12.2, “Calculation of Liquid Petroleum Quantities.”
11. API Chapter 14.6, “Continuous Density Measurement.”
12. API Chapter 14.7, “Standard for Mass Measurement of Natural Gas Liquids.”
13. API Chapter 14.8, “Liquefied Petroleum Gas Measurement.”
14. API Chapter 21.2, “Flow Measurement — Electronic Liquid Measurement.”
B. API/ASTM/GPA Technical Publication TP-25 Table 24E, “Correction of Volume to 60 °F Against Relative Density 60 °F/60 °F.”
C. ASTM-D-1250 (Table 24), “Volume Corrected to 60 oF and equilibrium vapor pressure.”
D. ASTM-D-2163 “Standard Test Method for Analysis of Liquid Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography.”
E. GPA Standard 2140, “Liquefied Petroleum Gas Specifications and Test Methods.”” Storage Lease (BUTANE ISOMER)
F. GPA Standard 2145, “Table of Physical Constants of Paraffin Hydrocarbons and Other Components of Natural Gas.”
G. GPA Standard 2174, “Method of Obtaining Hydrocarbon Fluid Samples Using a Floating Piston Cylinder.” Storage Lease (Enterprise North Propane-Propylene Splitters)”
H. GPA Standard 2177, “Method for the Analysis of Demethanized Hydrocarbon Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography.”
I. GPA Standard 2186, “Method for the Extended Analysis of Hydrocarbon Mixtures Containing Nitrogen and Carbon Dioxide by Temperature Programmed Gas Chromatography.”
J. GPA Standard 8173, “Method for Converting Natural Gas Liquids and Vapors to Equivalent Liquid Volumes.”
K. GPA Standard 8182, “Tentative Standard for the Mass Measurement of Natural Gas Liquids.”
L. References to any API, GPA, ASTM or similar publications shall be deemed to encompass the latest edition, revision or amendment thereof.
Appears in 1 contract
Technical Publications. A. Manual of Petroleum Measurement Standards, American Petroleum Institute, Washington, D.C.:
1. API Chapter 1, “Definitions.” Storage Lease (Enterprise North Propane-Propylene Splitters)”
2. API Chapter 4, “Proving Systems.”
3. API Chapter 5.3, “Measurement of Liquid Hydrocarbons by Turbine Meters.”
4. API Chapter 5.4, “Accessory Equipment for Liquid Meters.”
5. API Chapter 5.6, “Measurement of Liquid Hydrocarbons by Coriolis Meters.”
6. API Chapter 9.2, “Pressure Hydrometer Test Method for Density or Relative Density.”
7. API Chapter 11.2.2, “Compressibility Factors for Hydrocarbons: 0.350 — 0.637 Relative Density (60 oF/60 oF) and –50 oF to 140 oF Metering Temperature.”
8. API 11.2.1, “Compressibility Factors for Hydrocarbons: 0-90o API Gravity Range.”
9. API Chapter 11.3.3.2, “Propylene Compressibility.”
10. API Chapter 12.2, “Calculation of Liquid Petroleum Quantities.”
11. API Chapter 14.6, “Continuous Density Measurement.”
12. API Chapter 14.7, “Standard for Mass Measurement of Natural Gas Liquids.”
13. API Chapter 14.8, “Liquefied Petroleum Gas Measurement.”
14. API Chapter 21.2, “Flow Measurement — Electronic Liquid Measurement.”
B. API/ASTM/GPA Technical Publication TP-25 Table 24E, “Correction of Volume to 60 °F Against Relative Density 60 °F/60 °F.”
C. ASTM-D-1250 (Table 24), “Volume Corrected to 60 oF and equilibrium vapor pressure.”
D. ASTM-D-2163 “Standard Test Method for Analysis of Liquid Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography.”
E. GPA Standard 2140, “Liquefied Petroleum Gas Specifications and Test Methods.”
F. GPA Standard 2145, “Table of Physical Constants of Paraffin Hydrocarbons and Other Components of Natural Gas.”
G. GPA Standard 2174, “Method of Obtaining Hydrocarbon Fluid Samples Using a Floating Piston Cylinder.” Storage Lease (Enterprise North Propane-Propylene Splitters)
H. GPA Standard 2177, “Method for the Analysis of Demethanized Hydrocarbon Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography.”
I. GPA Standard 2186, “Method for the Extended Analysis of Hydrocarbon Mixtures Containing Nitrogen and Carbon Dioxide by Temperature Programmed Gas Chromatography.”
J. GPA Standard 8173, “Method for Converting Natural Gas Liquids and Vapors to Equivalent Liquid Volumes.”
K. GPA Standard 8182, “Tentative Standard for the Mass Measurement of Natural Gas Liquids.”
L. References to any API, GPA, ASTM or similar publications shall be deemed to encompass the latest edition, revision or amendment thereof.
Appears in 1 contract
