Technology and Know-How License Grant Sample Clauses

Technology and Know-How License Grant. Licensor grants to Licensee: (a) an exclusive, non-revocable license to use the Technology to develop, manufacture, have manufactured, use, have used, market, distribute, and/or sell or have sold Licensed Products and to otherwise exploit the Technology within the Licensed Territory and within the Licensed Field; (b) a non-exclusive, non-revocable license to use the Know-How to develop, manufacture, have manufactured, use, have used, market, distribute, and/or sell or have sold Licensed Products and to otherwise exploit the Know-How within the Licensed Territory and within the Licensed Field; (c) a non-exclusive, non-revocable license to copy and display the manuals and other written materials as delivered by Licensor to Licensee from time to time, in any medium, relating to the maintenance, installation, or operation of the Licensed Subject Matter (the “Documentation”), only as reasonably necessary to exercise the licenses granted in Section 2.1(a) and Section 2.1(b) above. The above license grant(s) shall be subject to the payment by Licensee to Licensor of all consideration as provided by this Agreement. Licensee shall have the right to extend the license granted herein to any Affiliate provided that such Affiliate consents to be bound by this Agreement to the same extent as Licensee (provided that the foregoing does not and is not intended to create redundant or double obligations regarding royalties, reimbursement, marketing efforts or any other matter).
AutoNDA by SimpleDocs

Related to Technology and Know-How License Grant

  • SOFTWARE LICENSE GRANT Where Product is acquired on a licensed basis the following shall constitute the license grant:

  • License Grant If Products include software, firmware or documentation, Supplier grants to DXC a non-exclusive, perpetual, royalty free, worldwide license to use, reproduce, display, prepare derivative works of the documentation and distribute such works, software, firmware or documentation directly or as integrated into DXC products, and to sublicense such rights to third parties. Supplier shall identify all licenses and deliver to DXC all materials required to meet the requirements of any licenses for third party software that is included in the Products. Supplier shall deliver to DXC the source code for any software licensed under a license that has a source availability requirement (such as the GNU General Public License). If the source code is not included with the material that Supplier has previously delivered, Supplier shall deliver within seven (7) days after DXC’s request the source code for any software licensed under an open source license that has a source availability requirement. Supplier grants DXC the right to duplicate and distribute the materials as necessary.

  • Sublicense Grant Licensee will be entitled to grant Sublicenses to third parties under the license granted pursuant to Section 2.1 subject to the terms of this Section 2.3. Any such Sublicense shall be on terms and conditions in compliance with and not inconsistent with the terms of this Agreement. The grant of a Sublicense shall not in any way diminish or alter Licensee’s obligations under this Agreement.

  • Licensed Technology (a) LICENSOR is not aware of any interference, infringement, misappropriation, or other conflict with any intellectual property rights of third parties, and LICENSOR has never received any charge, complaint, claim, demand, or notice alleging any such interference, infringement, misappropriation, or violation (including any claim that LICENSOR must license or refrain from using any intellectual property rights of any third party). To the knowledge of LICENSOR, no third party has interfered with, infringed upon, misappropriated, or otherwise come into conflict with any of the LICENSED TECHNOLOGY. (b) Exhibit A identifies each patent or registration which has been issued to LICENSOR with respect to any of the LICENSED TECHNOLOGY and identifies each pending patent application or application for registration which LICENSOR has made with respect to any of the LICENSED TECHNOLOGY. LICENSEE acknowledges that LICENSOR has previously made available to LICENSEE correct and complete copies of all such patents, registrations and applications (as amended to-date) in LICENSOR’s possession and has made available to LICENSEE correct and complete copies of all other written documentation in LICENSOR’s possession evidencing ownership and prosecution (if applicable) of each such item. (c) Exhibit A identifies each item of LICENSED TECHNOLOGY that is assigned to LICENSOR or that LICENSOR uses pursuant to license, sublicense, agreement, or permission. LICENSOR has made available to LICENSEE correct and complete copies of all such licenses, sublicenses, agreements, patent prosecution files and permissions (as amended to-date) in LICENSOR’s possession. With respect to each item of LICENSED TECHNOLOGY required to be identified in Exhibit A and to the knowledge of LICENSOR: (i) the license, sublicense, agreement, or permission covering the item is legal, valid, binding, enforceable, and in full force and effect; (ii) the license, sublicense, agreement, or permission will continue to be legal, valid, binding, enforceable, and in full force and effect on identical terms following the consummation of the transactions contemplated hereby; (iii) no Party to the license, sublicense, agreement, or permission is in breach or default, and no event has occurred which with notice or lapse of time would constitute a breach or default or permit termination, modification, or acceleration thereunder; (iv) no party to the license, sublicense, agreement, or permission has repudiated any provision thereof; (v) the underlying item of LICENSED TECHNOLOGY is not subject to any outstanding lien or encumbrance, injunction, judgment, order, decree, ruling, or charge; (vi) no action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand is pending or is threatened which challenges the legality, validity, or enforceability of the underlying item of LICENSED TECHNOLOGY; and (vii) except as provided in Exhibit A, LICENSOR has not granted any license or similar right to the LICENSED TECHNOLOGY within the GENERAL FIELD or PARTHENOGENESIS FIELD.

  • License Terms This license is for one full Semester. It cannot be cancelled or terminated except under the conditions cited in this license.

  • The License 3.1.1 Subject to and in accordance with the terms and conditions set forth in this Agreement, and in particular subject to the due fulfillment of all the obligations assumed towards Maha-Metro by the Licensee, Maha-Metro hereby grants and authorizes the Licensee to the following (the “Specified Purpose”) : a. To have access to Licensed Space(s) during the License Period, develop, finance, commission, operate, manage and maintain the Licensed Space(s) during the License Period at the cost and risk of the Licensee. Any development made by the Licensee on the Licensed Space(s) shall be deemed to be the property of Maha-Metro and all the rights of the Licensee in the Licensed Space(s) shall relinquish in the favour of Maha-Metro. b. Subsequent to the Fitment Period, to utilise the licensed space, at its own costs and risk, for carrying out activities stated at Point No.

  • Background Technology List here prior contracts to assign Inventions that are now in existence between any other person or entity and you.

  • Software License Terms (a) Software that is made available by a Provider to Recipient in connection with any Service (any such Software being referred to herein as “TSA-Licensed Software”) provided hereunder will be subject to the terms set forth in this Section 3.5 except as otherwise provided in the applicable Service Schedule. The Provider hereby grants to the Recipient a non-exclusive, non-transferable license to use, in object code form, any TSA-Licensed Software that is made available by the Provider pursuant to a Service Schedule. For the avoidance of doubt, the Provider that makes available any TSA-Licensed Software in connection with the provision of any Service retains the unrestricted right to enhance or otherwise modify such TSA-Licensed Software at any time, provided that such enhancements or other modifications do not disrupt the provision of such Service to the Recipient. (b) The Recipient may not exceed the number of licenses, agents, tiers, nodes, seats, or other use restrictions or authorizations, if any, specified in the applicable Service Schedule. Some TSA-Licensed Software may require license keys or contain other technical protection measures. The Recipient acknowledges that the Provider may monitor the Recipient’s compliance with use restrictions and authorizations remotely, or otherwise. If the Provider makes a license management program available which records and reports license usage information, the Recipient agrees to appropriately install, configure and execute such license management program. (c) Unless otherwise permitted by the Provider, the Recipient may only make copies or adaptations of the TSA-Licensed Software for archival purposes or when copying or adaptation is an essential step in the authorized use of TSA-Licensed Software. If the Recipient makes a copy for backup purposes and installs such copy on a backup device, the Recipient may not operate such backup installation of the TSA-Licensed Software without paying an additional license fee, except in cases where the original device becomes inoperable. If a copy is activated on a backup device in response to failure of the original device, the use on the backup device must be discontinued when the original or replacement device becomes operable. The Recipient may not copy the TSA-Licensed Software onto or otherwise use or make it available on, to, or through any public or external distributed network. Licenses that allow use over the Recipient’s intranet require restricted access by authorized users only. (d) The Recipient must reproduce all copyright notices that appear in or on the TSA-Licensed Software (including documentation) on all permitted copies or adaptations. Copies of documentation are limited to internal use. (e) Notwithstanding anything to the contrary herein, certain TSA-Licensed Software may be licensed under the applicable Service Schedule for use only on a computer system owned, controlled, or operated by or solely on behalf of the Recipient and may be further identified by the Provider by the combination of a unique number and a specific system type (“Designated System”) and such license will terminate in the event of a change in either the system number or system type, an unauthorized relocation, or if the Designated System ceases to be within the possession or control of the Recipient. (f) The Recipient will not modify, reverse engineer, disassemble, decrypt, decompile, or make derivative works of the TSA-Licensed Software. Where the Recipient has other rights mandated under statute, the Recipient will provide the Provider with reasonably detailed information regarding any intended modifications, reverse engineering, disassembly, decryption, or decompilation and the purposes therefor. (g) The Recipient may permit a consultant or subcontractor to use TSA-Licensed Software at the licensed location for the sole purpose of providing services to the Recipient. (h) Upon expiration or termination of the Service Schedule under which TSA-Licensed Software is made available, the Recipient will destroy the TSA-Licensed Software. The Recipient will remove and destroy or return to the Provider any copies of the TSA-Licensed Software that are merged into adaptations, except for individual pieces of data in the Recipient’s database. The Recipient will provide certification of the destruction of TSA-Licensed Software, and copies thereof, to the Provider. The Recipient may retain one copy of the TSA-Licensed Software subsequent to expiration or termination solely for archival purposes. (i) The Recipient may not sublicense, assign, transfer, rent, or lease the TSA-Licensed Software to any other person except as permitted in this Section 3.5. (j) The Recipient agrees that the Provider may engage a third party designated by the Provider and approved by the Recipient (such approval not to be unreasonably withheld) to audit the Recipient’s compliance with the Software License terms. Any such audit will be at the Provider’s expense, require reasonable notice, and will be performed during normal business hours. Such third party will be required to execute a non-disclosure agreement that restricts such third party from disclosing confidential information of the Recipient to the Provider, except to the extent required to report on the extent to which the Recipient is not in compliance with the Software License terms.

  • Third Party Technology The Company makes use of third party technology to collect information required for traffic measurement, research, and analytics. Use of third party technology entails data collection. We therefore would like to inform clients the Company enables third parties to place or read cookies located on the browsers of users entering the Company’s domain. Said third parties may also use web beacons to collect information through advertising located on the Company’s web site. Please note that you may change your browser settings to refuse or disable Local Shared Objects and similar technologies; however, by doing so you may be disabling some of the functionality of Company’s services.

  • License Grants The licenses granted in this Section 2 are subject to the terms and conditions set forth in this XXXX: a. Subject to Section 2(b), you may install and use the Software on a single computer; OR install and store the Software on a storage device, such as a network server, used only to install the Software on your other computers over an internal network, provided you have a license for each separate computer on which the Software is installed and run. Except as otherwise provided in Section 2(b), a license for the Software may not be shared, installed or used concurrently on different computers. b. In addition to the single copy of the Software permitted in Section 2(a), the primary user of the computer on which the Software is installed may make a second copy of the Software and install it on either a portable computer or a computer located at his or her home for his or her exclusive use, provided that: A. the second copy of the Software on the portable or home computer (i) is not used at the same time as the copy of the Software on the primary computer and (ii) is used by the primary user solely as allowed for such version or edition (such as for educational use only), B. the second copy of the Software is not installed or used after the time such user is no longer the primary user of the primary computer on which the Software is installed. c. In the event the Software is distributed along with other PremiumSoft software products as part of a suite of products (collectively, the "Studio"), the license of the Studio is licensed as a single product and none of the products in the Studio, including the Software, may be separated for installation or use on more than one computer. d. You may make one copy of the Software in machine-readable form solely for backup purposes. You must reproduce on any such copy all copyright notices and any other proprietary legends on the original copy of the Software. You may not sell or transfer any copy of the Software made for backup purposes. e. You agree that PremiumSoft may audit your use of the Software for compliance with these terms at any time, upon reasonable notice. In the event that such audit reveals any use of the Software by you other than in full compliance with the terms of this Agreement, you shall reimburse PremiumSoft for all reasonable expenses related to such audit in addition to any other liabilities you may incur as a result of such non-compliance. f. Your license rights under this XXXX are non-exclusive.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!