Technology Transfer to DSM Sample Clauses

Technology Transfer to DSM. Within thirty (30) days after the Signing Date, Martek shall (i) commence with the transfer to DSM of documents and any biological material relating to the Martek Proprietary Technology and shall complete such transfer within one hundred eighty (180) days after the Signing Date, (ii) use its commercially reasonable efforts to assist DSM to exploit the Martek Proprietary Technology as soon as reasonably practicable, and (iii) provide to DSM technology services, in the case of (ii) or (iii) in accordance with the applicable Transfer Procedures, if any. Within thirty (30) days after the discovery of any Improvement, the creating party shall transfer such Improvement to the other party pursuant to the procedure described above. Martek hereby represents and warrants to DSM that (i) the Martek Proprietary Technology and such technology services constitute all of the intellectual property and technology services of Martek reasonably necessary to enable DSM to exercise its rights under the licenses granted to it in Section 7.4(a) and (ii) Martek has the right to grant all licenses granted hereunder to DSM, subject to the disclaimer in Section 4.9(c) and subject to the rights referred to in Section 6.1(g) of certain of Martek’s Infant Formula Product customers to produce or have produced ARA Products. *The asterisk denotes that confidential portions of this exhibit have been omitted in reliance on Rule 24b-2 of the Securities Exchange Act of 1934. The confidential portions have been submitted separately to the Securities and Exchange Commission ARA Alliance, Purchase and Production Agreement
Sample 1
AutoNDA by SimpleDocs
Technology Transfer to DSM. Within thirty (30) days after the Signing Date, Martek shall (i) commence with the transfer to DSM of documents and any biological material relating to the Martek Proprietary Technology and shall complete such transfer within one hundred eighty (180) days after the Signing Date, (ii) use its commercially reasonable efforts to assist DSM to exploit the Martek Proprietary Technology as soon as reasonably practicable, and (iii) provide to DSM technology services, in the case of (ii) or (iii) in accordance with the applicable Transfer Procedures, if any. Within thirty (30) days after the discovery of any Improvement, the creating party shall transfer such Improvement to the other party pursuant to the procedure described above. Martek hereby represents and warrants to DSM that (i) the Martek Proprietary Technology and such technology services constitute all of the intellectual property and technology services of Martek reasonably necessary to enable DSM to exercise its rights under the licenses granted to it in Section 7.4(a) and (ii) Martek has the right to grant all licenses granted hereunder to DSM, subject to the disclaimer in Section 4.9(c) and subject to the rights referred to in Section 6.1(g) of certain of Martek’s Infant Formula Product customers to produce or have produced ARA Products.
Sample 1

Related to Technology Transfer to DSM

  • Technology Transfer Subject to the terms of the Development Supply Agreement, as soon as reasonably practicable, but in no event later than the fifth (5th) anniversary of the Effective Date, Alnylam shall initiate a technology transfer to MedCo, or to its Third Party manufacturer(s) of Licensed Product, selected by MedCo and reasonably acceptable to Alnylam, of Alnylam Know-How that is reasonably necessary or useful for the Manufacture of the Licensed Product, and shall make available its personnel on a reasonable basis to consult with MedCo or such Third Party manufacturer(s) with respect thereto, all at MedCo’s expense, including the Costs reasonably incurred by Alnylam in connection with such technology transfer activities. MedCo shall reimburse Alnylam such Costs incurred with respect to such Manufacturing technology transfer within [***] days after receipt of an invoice therefor. Alnylam and its Affiliates shall keep complete and accurate records in sufficient detail to enable the payments payable hereunder to be determined. Alnylam shall not be required to perform technology transfer to more than one Third Party manufacturer for each stage of the Licensed Product supply chain (i.e., Bulk Drug Substance, Bulk Drug Product and Finished Product). Promptly after MedCo’s written request, Alnylam shall use Commercially Reasonable Efforts to assign to MedCo any manufacturing agreement between Alnylam and a Third Party that is solely related to the manufacture of Licensed Products. Such assignment shall be subject to the terms and conditions of such agreement, including any required consents of such Third Party and MedCo’s written agreement to assume all the obligations of Alnylam under such agreement to be undertaken after such assignment, but Alnylam shall remain solely responsible for its obligations under such agreement arising prior to such assignment. Except as provided in the immediately preceding sentence, MedCo shall be solely responsible for contracting with such Third Party manufacturer (and any other Third Party manufacture to whom Alnylam has initiated technology transfer as set forth in this Section 5.3) for the supply of such Licensed Product and Alnylam shall have no obligations under such agreement between MedCo and such Third Party manufacturer. Alnylam shall use Commercially Reasonable Efforts to obtain any such consent in a form reasonably acceptable to MedCo.

  • Manufacturing Technology Transfer With respect to each Technology Transfer Product, upon AbbVie’s written request after the Inclusion Date for the Included Target to which such Technology Transfer Product is Directed, Morphic shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party manufacturer) of all Morphic Know-How and Joint Know-How relating to the then-current process for the Manufacture of such Technology Transfer Product (the “Manufacturing Process”) and to implement the Manufacturing Process at facilities designated by AbbVie (such transfer and implementation, as more fully described in this Section 5.3, the “Manufacturing Technology Transfer”). To assist with the Manufacturing Technology Transfer, Morphic will make its personnel reasonably available to AbbVie during normal business hours for up to [***] FTE hours with respect to each Included Target (in each case, free of charge to AbbVie) to transfer and implement the Manufacturing Process under this Section 5.3. Thereafter, if requested by AbbVie, Morphic shall continue to perform such obligations; provided, that AbbVie will reimburse Morphic for its full-time equivalent (FTE) costs (for clarity, in excess of [***] FTE hours) and any reasonable and verifiable out-of-pocket costs incurred in providing such assistance. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE COMPANY IF PUBLICLY DISCLOSED.

  • Technology License 4.1 Unless any event described in Article 2.2 or 2.3 of this Agreement occurs, all of the technology required to be licensed for any of Party B’s business shall be provided by Party A on an exclusive basis. Party A will try its best to license Party B to use the technology owned by Party A, or re-license Party B to use the technology as approved by the owner.

  • Information Systems Acquisition Development and Maintenance a. Client Data – Client Data will only be used by State Street for the purposes specified in this Agreement.

  • Notice of Material Developments Each Party shall give prompt written notice to the other Parties of: (a) any material variances in any of its representations or warranties contained in Articles 2 or 3 above, as the case may be (the Disclosure Schedule); (b) any breach of any covenant or agreement hereunder by such Party; and (c) any other material development which adversely affects the ability of such Party to consummate the transactions contemplated by this Agreement.

  • Technology Access Fee In consideration of the licenses and rights granted to Regado herein, Regado shall, as of the date immediately preceding the closing (the “Closing”) of the first equity financing of Regado in which Regado is assigned a pre-money valuation of not less than [***] dollars ($[***]), issue to Archemix fully-paid and non-assessable shares of common stock of Regado equal to [***] percent ([***]%) of the total number of equity shares of Regado, on a fully diluted basis, immediately prior to the issuance of shares at the Closing. Regado shall deliver written notice of the Closing to Archemix at least [***] business days prior to such Closing in accordance with the notice provisions contained in Section 14.1 of this Agreement. Archemix and Regado shall enter into such agreements relating to the issuance of the common stock as are customary under such circumstances. For the purpose of this Agreement, “fully diluted basis” shall mean the aggregate of (a) the number of shares of common stock issued and outstanding on the determination date, (b) the number of shares of common stock issuable upon exercise, exchange or conversion of all exercisable, exchangeable or convertible securities outstanding on the determination date, assuming such securities were exercised, exchanged or converted on the determination date (without regard to whether such securities are actually exercisable, exchangeable or convertible on the determination date) and (c) the number of shares of common stock issuable pursuant to any other obligation or agreement of, or right granted by, Regado, whether vested or unvested, contingent or otherwise.

  • Commercialization Reports After the First Commercial Sale of a Licensed Product anywhere in the Territory, LICENSEE shall submit to Cornell semi-annual reports on or before each February 28 and August 31 of each year. Each report shall cover LICENSEE’s (and each Affiliate’s and Sublicensee’s) most recently completed calendar half-year and shall show:

  • Business Development Company Status The Company, during a period of at least 12 months from the Closing Time, will use its commercially reasonable efforts to maintain its status as a business development company; provided, however, the Company may cease to be, or withdraw its election as, a business development company, with the approval of the board of directors and a vote of stockholders as required by Section 58 of the 1940 Act or any successor provision.

  • Technology For purposes of this Agreement, “Technology” means all Software, information, designs, formulae, algorithms, procedures, methods, techniques, ideas, know-how, research and development, technical data, programs, subroutines, tools, materials, specifications, processes, inventions (whether or not patentable and whether or not reduced to practice), apparatus, creations, improvements and other similar materials, and all recordings, graphs, drawings, reports, analyses, and other writings, and other embodiments of any of the foregoing, in any form or media whether or not specifically listed herein. Further, for purposes of this Agreement, “Software” means any and all computer programs, whether in source code or object code; databases and compilations, whether machine readable or otherwise; descriptions, flow-charts and other work product used to design, plan, organize and develop any of the foregoing; and all documentation, including user manuals and other training documentation, related to any of the foregoing.

  • Payments for Distribution Assistance and Administrative Support Services (a) Payments to the Distributor. In consideration of the payments made by the Fund to the Distributor under this Plan, the Distributor shall provide administrative support services and distribution services to the Fund. Such services include distribution assistance and administrative support services rendered in connection with Shares (1) sold in purchase transactions, (2) issued in exchange for shares of another investment company for which the Distributor serves as distributor or sub-distributor, or (3) issued pursuant to a plan of reorganization to which the Fund is a party. If the Board believes that the Distributor may not be rendering appropriate distribution assistance or administrative support services in connection with the sale of Shares, then the Distributor, at the request of the Board, shall provide the Board with a written report or other information to verify that the Distributor is providing appropriate services in this regard. For such services, the Fund will make the following payments to the Distributor:

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!