Terminal Unit Sample Clauses

Terminal Unit. An end-user terminal device, whether fixed, mobile, vehicular, portable, or hand-held, having RF transmit and/or RF receive capabilities, which device is designed for wireless voice and/or data communications. Components and Wireless Modules are not Terminal Units.

Related to Terminal Unit

  • Remote Terminal Unit Prior to the Initial Synchronization Date of the Large Generating Facility, a Remote Terminal Unit, or equivalent data collection and transfer equipment acceptable to the Parties, shall be installed by Developer, or by Connecting Transmission Owner at Developer’s expense, to gather accumulated and instantaneous data to be telemetered to the location(s) designated by Connecting Transmission Owner and NYISO through use of a dedicated point-to-point data circuit(s) as indicated in Article 8. 1. The communication protocol for the data circuit(s) shall be specified by Connecting Transmission Owner and NYISO. Instantaneous bi-directional analog real power and reactive power flow information must be telemetered directly to the location(s) specified by Connecting Transmission Owner and NYISO. Each Party will promptly advise the appropriate other Party if it detects or otherwise learns of any metering, telemetry or communications equipment errors or malfunctions that require the attention and/or correction by that other Party. The Party owning such equipment shall correct such error or malfunction as soon as reasonably feasible.

  • Two-Way Interconnection Trunks 2.4.1 Where the Parties use Two-Way Interconnection Trunks for the exchange of traffic between Verizon and KDL, KDL, at its own expense, shall: 2.4.1.1 provide its own facilities to the technically feasible Point(s) of Interconnection on Verizon’s network in a LATA; and/or 2.4.1.2 obtain transport to the technically feasible Point(s) of Interconnection on Verizon’s network in a LATA (a) from a third party, or, (b) if Verizon offers such transport pursuant to this Agreement or an applicable Verizon Tariff, from Verizon. 2.4.2 Where the Parties use Two-Way Interconnection Trunks for the exchange of traffic between Verizon and KDL, Verizon, at its own expense, shall provide its own facilities to the technically feasible Point(s) of Interconnection on Verizon’s network in a LATA. 2.4.3 Prior to establishing any Two-Way Interconnection Trunks, KDL shall meet with Verizon to conduct a joint planning meeting (“Joint Planning Meeting”). At that Joint Planning Meeting, each Party shall provide to the other Party originating Centium Call Seconds (Hundred Call Seconds) information, and the Parties shall mutually agree on the appropriate initial number of End Office and Tandem Two-Way Interconnection Trunks and the interface specifications at the technically feasible Point(s) of Interconnection on Verizon’s network in a LATA at which the Parties interconnect for the exchange of traffic. Where the Parties have agreed to convert existing One-Way Interconnection Trunks to Two-Way Interconnection Trunks, at the Joint Planning Meeting, the Parties shall also mutually agree on the conversion process and project intervals for conversion of such One- Way Interconnection Trunks to Two-Way Interconnection Trunks. 2.4.4 On a semi-annual basis, KDL shall submit a good faith forecast to Verizon of the number of End Office and Tandem Two-Way Interconnection Trunks that KDL anticipates Verizon will need to provide during the ensuing two (2) year period for the exchange of traffic between KDL and Verizon. KDL’s trunk forecasts shall conform to the Verizon CLEC trunk forecasting guidelines as in effect at that time. 2.4.5 The Parties shall meet (telephonically or in person) from time to time, as needed, to review data on End Office and Tandem Two-Way Interconnection Trunks to determine the need for new trunk groups and to plan any necessary changes in the number of Two-Way Interconnection Trunks. 2.4.6 Two-Way Interconnection Trunks shall have SS7 Common Channel Signaling. The Parties agree to utilize B8ZS and Extended Super Frame (ESF) DS1 facilities, where available. 2.4.7 With respect to End Office Two-Way Interconnection Trunks, both Parties shall use an economic Centium Call Seconds (Hundred Call Seconds) equal to five (5). Either Party may disconnect End Office Two-Way Interconnection Trunks that, based on reasonable engineering criteria and capacity constraints, are not warranted by the actual traffic volume experienced. 2.4.8 Two-Way Interconnection Trunk groups that connect to a Verizon access Tandem shall be engineered using a design blocking objective of ▇▇▇▇-▇▇▇▇▇▇▇▇▇ B.005 during the average time consistent busy hour. Two-Way Interconnection Trunk groups that connect to a Verizon local Tandem shall be engineered using a design blocking objective of ▇▇▇▇-▇▇▇▇▇▇▇▇▇ B.01 during the average time consistent busy hour. Verizon and KDL shall engineer Two-Way Interconnection Trunks using Telcordia Notes on the Networks SR 2275 (formerly known as BOC Notes on the LEC Networks SR-TSV-002275). 2.4.9 The performance standard for final Two-Way Interconnection Trunk groups shall be that no such Interconnection Trunk group will exceed its design blocking objective (B.005 or B.01, as applicable) for three

  • Terminal Pay Any employee at normal retirement or his/her beneficiary if service is terminated by death, shall be provided terminal pay. Such terminal pay shall not exceed an amount determined as follows: 1. During the first three (3) years of service: a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by 35 percent multiplied by the number of unused sick leave days held on July 1, 1994. b. The affected employee’s daily rate of pay at the time sick leave is earned times 35 percent times the number of days of accumulated sick leave earned after July 1, 1994. 2. During the fourth (4th) through sixth (6th) years of service: a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by 40 percent multiplied by the number of unused sick leave days held on July 1, 1994. b. The affected employee’s daily rate of pay at the time sick leave is earned times 40 percent times the number of days of accumulated sick leave earned after July 1, 1994. 3. During the seventh (7th) through ninth (9th) years of service: a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by 45 percent multiplied by the number of unused sick leave days held on July 1, 1994. b. The affected employee’s daily rate of pay at the time sick leave is earned times 45 percent times the number of days of accumulated sick leave earned after July 1, 1994. 4. During the tenth (10th) through the twelfth (12th) year of service: a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by 50 percent multiplied by the number of unused sick leave days held on July 1, 1994. b. The affected employee’s daily rate of pay at the time sick leave is earned times 50 percent times the number of days of accumulated sick leave earned after July 1, 1994. 5. During and after the thirteenth (13th) year of service: a. The affected employee’s daily rate of pay on July 1, 1994, multiplied by the number of unused sick leave days held on July 1, 1994. b. The affected employee’s daily rate of pay at the time sick leave is earned* multiplied by the number of days of accumulated sick leave earned. 6. No employee who meets the eligibility requirements listed above may receive any compensation for sick leave payments unless they sign and execute the Payment of Sick Leave Upon Retirement Agreement provided by the Superintendent. This Agreement requires the retiring Board employee to seek, accept, and cash the first retirement benefit check issued by the Florida Retirement System. The employee must qualify for “normal retirement” which under this policy shall mean retirement under plan A, B, C, D, E under the Florida Retirement System or any other plan established by the Legislature with either full or reduced benefits as provided by law. Normal retirement shall not be interpreted to include disability retirement. *Note: “At the time sick leave is earned” shall be interpreted to mean the value of sick leave at the end of each school year or at the time the affected employee retires, whichever comes first.

  • Terminal Receipt You can get a receipt at the time you make any transaction (except inquiries) involving your account using an ATM and/or point-of-sale (POS) terminal.

  • Pipelines Developer shall have no interest in the pipeline gathering system, which gathering system shall remain the sole property of Operator or its Affiliates and shall be maintained at their sole cost and expense.