Common use of Terms of Delivery Clause in Contracts

Terms of Delivery. 7.1 The Supplier must deliver DAP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University Department of Environmental Science Xxxxxxxxxxxxxxxx 000 0000 Xxxxxxxx Xxxxxxx 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.

Terms of Delivery. ‌ 7.1 The Supplier must deliver DAP DDP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University Department of Environmental Science Xxxxxxxxxxxxxxxx 000 Biomecine Xxxxx-Xxxxxxxxxxxxx 00 0000 Xxxxxxxx Xxxxxx X Xxxxxxx 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.

Terms of Delivery. ‌ 7.1 The Supplier must deliver DAP (Incoterms 20102020) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University Department of Environmental Food Science Xxxxxxxxxxxxxxxx 000 0000 Xxxxxxxx XxxxxxxAgro Food Park 48 8200 Aarhus N Denmark 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must (if possible) inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.

Terms of Delivery. ‌ 7.1 The Supplier must deliver DAP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University INANO and Department of Environmental Science Xxxxxxxxxxxxxxxx Chemistry Xxxxxxxxxxxxxx 000 0000 Xxxxxxxx Xxxxxx X Xxxxxxx 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.

Terms of Delivery. ‌ 7.1 The Supplier must deliver DAP DDP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University Department of Environmental Science Xxxxxxxxxxxxxxxx 000 Molecular Biology and Genetics Xxxxxx Xxxxx Xxx 00x 0000 Xxxxxxxx XxxxxxxXxxxxx C Denmark 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.

Terms of Delivery. 7.1 The Supplier must deliver DAP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University Department of Environmental Science Xxxxxxxxxxxxxxxx 000 Physics and Astronomy Ny Xxxxxxxxx 000, xxxxxxxx 0000 Xxxxxxxx 0000 Xxxxxx X Xxxxxxx 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.Supplier.‌

Terms of Delivery. ‌ 7.1 The Supplier must deliver DAP DDP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University Department of Environmental Science Xxxxxxxxxxxxxxxx 000 Culture and Society Xxxx Xxx. Xxxxx Xxx 0 0000 Xxxxxxxx Xxxxxx X Xxxxxxx 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.

Terms of Delivery. ‌ 7.1 The Supplier must deliver DAP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University The INANO-Bioscience Department of Environmental Science Xxxxxxxxxxxxxxxx 000 0000 Xxxxxxxx XxxxxxxAtt. xxx Xxxxxx Xxxxx Vej 14 8000 Aarhus C Denmark 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.

Terms of Delivery. ‌ 7.1 The Supplier must deliver DAP DDP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University Department of Environmental Science Xxxxxxxxxxxxxxxx 000 Engineering Xxxxxxxx 0 0000 Xxxxxxxx Xxxxxx Xxxxxxx 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.

Terms of Delivery. ‌ 7.1 The Supplier must deliver DAP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University Department of Environmental Science Xxxxxxxxxxxxxxxx 000 Physics and Astronomy Ny Xxxxxxxxx 000, xxxxxxxx 0000 Xxxxxxxx 0000 Xxxxxx X Xxxxxxx 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.

Terms of Delivery. ‌ 7.1 The Supplier must deliver DAP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University Department of Environmental Science Xxxxxxxxxxxxxxxx 000 Physics and Astronomy Ny Xxxxxxxxx 000, xxxxxxxx 0000 Xxxxxxxx 0000 Xxxxxx X Xxxxxxx 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.

Terms of Delivery. ‌ 7.1 The Supplier must deliver DAP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University Department of Environmental Science Xxxxxxxxxxxxxxxx 000 Engineering Xxxxxx Xxxxx xxx 00 0000 Xxxxxxxx XxxxxxxXxxxxx C Denmark 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.

Terms of Delivery. ‌ 7.1 The Supplier must deliver DAP DDP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University Department of Environmental Food Science Xxxxxxxxxxxxxxxx 000 0000 Xxxxxxxx XxxxxxxAgroFood Park 48 8200 Aarhus N Denmark 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.

Terms of Delivery. ‌ 7.1 The Supplier must deliver DAP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University Department of Environmental Science Xxxxxxxxxxxxxxxx 000 0000 Xxxxxxxx Xxxxxxx 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.

Terms of Delivery. ‌ 7.1 The Supplier must deliver DAP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University Department of Environmental Science Xxxxxxxxxxxxxxxx 000 Physics and Astronomy Ny Xxxxxxxxx 000, xxxxxxxx 0000 Xxxxxxxx 0000 Xxxxxx X Xxxxxxx 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.Supplier.‌

Terms of Delivery. ‌ 7.1 The Supplier must deliver DAP (Incoterms 2010) the Products, and if required by the Costumer, install the Product on the following address: Aarhus University Department of Environmental Science Xxxxxxxxxxxxxxxx chemistry Xxxxxxxxxxxxxx 000 0000 Xxxxxxxx Xxxxxx X Xxxxxxx 7.2 Additional supplies and services are, unless otherwise informed in writing, delivered and installed at the same address. 7.3 The Supplier is responsible for all Products being packed suitably and appropriately for domestic and/or overseas transport with due consideration to the properties, nature and composition of the goods supplied. All packing costs are included in the prices. 7.4 The Customer must inspect quantities delivered as well as the quality of the Product. The Customer must without undue delay inform the Supplier of any deviation from the specifications stated in the order or elsewhere. 7.5 The risk of accidental destruction of the Products will pass to the Customer upon complete delivery to the address specified in the order and after the Customer has signed for receipt of the Products. Signing for receipt will not preclude the Customer from complaining about incorrect or defective delivery. 7.6 Division of the Order into several deliveries is not accepted, unless this has been agreed in writing between the Customer and the Supplier.