Common use of Test course Clause in Contracts

Test course. The braking tests shall be done on a flat test surface of sufficient length and width, with a maximum 2 per cent gradient, covered with packed snow. The snow surface shall be composed of a hard packed snow base at least 3 cm thick and a surface layer of medium packed and prepared snow about 2 cm thick. The air temperature, measured about one meter above the ground, shall be between ‑2 °C and ‑15 °C; the snow temperature, measured at a depth of about one centimeter, shall be between ‑4 °C and ‑15 °C. It is recommended to avoid direct sunlight, large variations of sunlight or humidity, as well as wind. The snow compaction index measured with a CTI penetrometer1 shall be between 75 and 85.

Appears in 5 contracts

Samples: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles

AutoNDA by SimpleDocs

Test course. The braking tests shall be done on a flat test surface of sufficient length and width, with a maximum 2 per cent gradient, covered with packed snow. The snow surface shall be composed of a hard packed snow base at least 3 cm thick and a surface layer of medium packed and prepared snow about 2 cm thick. The air temperature, measured about one meter above the ground, shall be between ‑2 -2 °C and ‑15 -15 °C; the snow temperature, measured at a depth of about one centimetercentimetre, shall be between ‑4 -4 °C and ‑15 -15 °C. It is recommended to avoid direct sunlight, large variations of sunlight or humidity, as well as wind. The snow compaction index measured with a CTI penetrometer1 shall be between 75 and 85.

Appears in 3 contracts

Samples: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles

Test course. The braking tests shall be done on a flat test surface of sufficient length and width, with a maximum 2 per cent gradient, covered with packed snow. The snow surface shall be composed of a hard packed snow base at least 3 cm thick and a surface layer of medium packed and prepared snow about 2 cm thick. The air temperature, measured about one meter above the ground, shall be between ‑2 -2 °C and ‑15 -15 °C; the snow temperature, measured at a depth of about one centimetercentimetre, shall be between ‑4 -4 °C and ‑15 -15 °C. It is recommended to avoid direct sunlight, large variations of sunlight or humidity, as well as wind. The snow compaction index measured with a CTI penetrometer1 shall be between 75 and 85. 1 See appendix of ASTM standard F1805-06 for details.

Appears in 3 contracts

Samples: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles

Test course. The braking tests shall be done on a flat test surface of sufficient length and width, with a maximum 2 per cent gradient, covered with packed snow. The snow surface shall be composed of a hard packed snow base at least 3 cm thick and a surface layer of medium packed and prepared snow about 2 cm thick. The air temperature, measured about one meter above the ground, shall be between ‑2 °C and ‑15 °C; the snow temperature, measured at a depth of about one centimetercentimetre, shall be between ‑4 -4 °C and ‑15 °C. It is recommended to avoid direct sunlight, large variations of sunlight or humidity, as well as wind. The snow compaction index measured with a CTI penetrometer1 shall be between 75 and 85.

Appears in 1 contract

Samples: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles

Test course. The braking tests shall be done on a flat test surface of sufficient length and width, with a maximum 2 per cent gradient, covered with packed snow. The snow surface shall be composed of a hard packed snow base at least 3 cm thick and a surface layer of medium packed and prepared snow about 2 cm thick. The air temperature, measured about one meter above the ground, shall be between ‑2 -2 °C and ‑15 -15 °C; the snow temperature, measured at a depth of about one centimetercentimetre, shall be between ‑4 4 °C and ‑15 -15 °C. It is recommended to avoid direct sunlight, large variations of sunlight or humidity, as well as wind. 1 See appendix of ASTM standard F1805-06 for details. The snow compaction index measured with a CTI penetrometer1 shall be between 75 and 85.

Appears in 1 contract

Samples: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles

AutoNDA by SimpleDocs

Test course. The braking tests shall be done on a flat test surface of sufficient length and width, with a maximum 2 per cent gradient, covered with packed snow. The snow surface shall be composed of a hard packed snow base at least 3 cm thick and a surface layer of medium packed and prepared snow about 2 cm thick. The air temperature, measured about one meter above the ground, shall be between ‑2 -2 °C and ‑15 -15 °C; the snow temperature, measured at a depth of about one centimetercentimetre, shall be between ‑4 4 °C and ‑15 -15 °C. It is recommended to avoid direct sunlight, large variations of sunlight or humidity, as well as wind. The snow compaction index measured with a CTI penetrometer1 shall be between 75 and 85. 1 See appendix of ASTM standard F1805-06 for details."

Appears in 1 contract

Samples: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts

Test course. The braking tests shall be done on a flat test surface of sufficient length and width, with a maximum 2 per cent gradient, covered with packed snow. The snow surface shall be composed of a hard packed snow base at least 3 cm thick and a surface layer of medium packed and prepared snow about 2 cm thick. The air temperature, measured about one meter above the ground, shall be between ‑2 -2 °C and ‑15 -15 °C; the snow temperature, measured at a depth of about one centimeter, shall be between ‑4 -4 °C and ‑15 -15 °C. It is recommended to avoid direct sunlight, large variations of sunlight or humidity, as well as wind. 1 See appendix of ASTM standard F1805-06 for details. The snow compaction index measured with a CTI penetrometer1 shall be between 75 and 85.

Appears in 1 contract

Samples: Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!