TOOLS AND TEST EQUIPMENT FOR COMMISSIONING Sample Clauses

TOOLS AND TEST EQUIPMENT FOR COMMISSIONING. 1. The Seller shall be responsible for supply of tools and test equipment necessary for his use during the commissioning phase. 2. The Seller shall list all tools and test equipment in all appropriate commissioning specifications.
AutoNDA by SimpleDocs

Related to TOOLS AND TEST EQUIPMENT FOR COMMISSIONING

  • Tools and Equipment As established by current practices, the Employer may determine and provide necessary tools, tool allowance, equipment and foul weather gear. The Employer will repair or replace employer-provided tools and equipment if damaged or worn out beyond usefulness in the normal course of business. Employees are accountable for equipment and/or tools assigned to them and will maintain them in a clean and serviceable condition.

  • Evaluation Software If the Software is an evaluation version or is provided to You for evaluation purposes, then, unless otherwise approved in writing by an authorized representative of Licensor, Your license to use the Software is limited solely for internal evaluation purposes in non-production use and in accordance with the terms of the evaluation offering under which You received the Software, and expires 90 days from installation (or such other period as may be indicated within the Software). Upon expiration of the evaluation period, You must discontinue use of the Software, return to an original state any actions performed by the Software, and delete the Software entirely from Your system and You may not download the Software again unless approved in writing by an authorized representative of Licensor. The Software may contain an automatic disabling mechanism that prevents its use after a certain period of time. RESTRICTIONS

  • CERTIFICATIONS; DISCLOSURE CONTROLS AND PROCEDURES The Adviser acknowledges that, in compliance with the Xxxxxxxx-Xxxxx Act of 2002 (the “Xxxxxxxx-Xxxxx Act”), and the implementing regulations promulgated thereunder, the Trust and the Fund are required to make certain certifications and have adopted disclosure controls and procedures. To the extent reasonably requested by the Trust, the Adviser agrees to use its best efforts to assist the Trust and the Fund in complying with the Xxxxxxxx-Xxxxx Act and implementing the Trust’s disclosure controls and procedures. The Adviser agrees to inform the Trust of any material development related to the Fund that the Adviser reasonably believes is relevant to the Fund’s certification obligations under the Xxxxxxxx-Xxxxx Act.

  • Performance Tests Contractor shall perform Performance Tests in accordance with Section 11.2 of the Agreement and Attachment S.

  • Controls and Procedures The records, systems, controls, data and information of the Company and the Company Subsidiaries are recorded, stored, maintained and operated under means (including any electronic, mechanical or photographic process, whether computerized or not) that are under the exclusive ownership and direct control of the Company, the Company Subsidiaries or their accountants (including all means of access thereto and therefrom), except for any nonexclusive ownership and nondirect control that would not reasonably be expected to have a material adverse effect on the system of internal accounting controls described below. The Company (i) has implemented and maintains disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act) to ensure that material information relating to the Company, including its consolidated Company Subsidiaries, is made known to the chief executive officer and the chief financial officer of the Company by others within those entities, and (ii) has disclosed, based on its most recent evaluation prior to the date of this Agreement, to the Company’s outside auditors and the audit committee of the Board of Directors (A) any significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) that are reasonably likely to adversely affect the Company’s ability to record, process, summarize and report financial information, and (B) any fraud, whether or not material, that involves management or other employees who have a significant role in the Company’s internal controls over financial reporting. As of the date of this Agreement, no officer of the Company has knowledge of any reason that its outside auditors and its chief executive officer and chief financial officer shall not be able to give the certifications and attestations required pursuant to the rules and regulations adopted pursuant to Section 404 of the Xxxxxxxx-Xxxxx Act of 2002, without qualification, when next due. Since December 31, 2008, (A) neither the Company nor any of the Company Subsidiaries nor, to the knowledge of the Company, any director, officer, employee, auditor, accountant or representative of the Company or any of the Company Subsidiaries, has received or otherwise had or obtained knowledge of any material complaint, allegation, assertion or claim, whether written or oral, regarding the accounting or auditing practices, procedures, methodologies or methods of the Company or any of the Company Subsidiaries or their respective internal accounting controls, including any material complaint, allegation, assertion or claim that the Company or any of the Company Subsidiaries has engaged in questionable accounting or auditing practices, and (B) no attorney representing the Company or any of the Company Subsidiaries, whether or not employed by the Company or any of the Company Subsidiaries, has reported under Part 205 of the SEC Rules (17 CFR §205.1, et.seq.) evidence of a material violation of securities laws, breach of fiduciary duty or similar violation by the Company or any of its officers, directors, employees or agents to the Board of Directors or any committee thereof or to any director or officer of the Company. The management of the Company has, since January 1, 2006, performed the evaluation of the effectiveness, as of the end of each fiscal year, of the Company’s internal control over financial reporting required by SEC Rule 13a-15(c). The evaluation as of December 31, 2010 did not disclose any material weaknesses.

  • Performance Testing 7.2.1 The Design-Builder shall direct and supervise the tests and, if necessary, the retests of the Plant using Design-Builder’s supervisory personnel and the Air Emissions Tester shall conduct the air emissions test, in each case, in accordance with the testing procedures set forth in Exhibit A (the “Performance Tests”), to demonstrate, at a minimum, compliance with the Performance Guarantee Criteria. Owner is responsible for obtaining Air Emissions Tester and for ensuring Air Emissions Tester’s timely performance. Design-Builder shall cooperate with the Air Emissions Tester to facilitate performance of all air emissions tests. Design-Builder shall not be held responsible for the actions of Owner’s employees and third parties involved in the Performance Testing, including but not limited to Air Emissions Tester. 7.2.2 No later than thirty (30) Days prior to the earlier of the Scheduled Substantial Completion Date or Substantial Completion, Design-Builder shall provide to Owner for review a detailed testing plan for the Performance Tests (other than for air emissions). Owner and Design-Builder shall agree upon a testing plan that shall be consistent with the Performance Test Protocol contained in Exhibit A hereto. After such agreement has been reached, Design-Builder shall notify the Owner five (5) business days prior to the date Design-Builder intends to commence the Performance Tests and shall notify the Owner upon commencement of the Performance Tests. Owner and Independent Engineer each have the right to witness all testing, including the Performance Tests and any equipment testing, whether at the Site or at the Subcontractor’s or equipment supplier’s premises during the course of this Agreement. Notwithstanding the foregoing sentence, Owner shall bear the costs of providing a witness to any such testing and all such witnesses shall comply at all times with Design-Builder’s, Subcontractor’s or equipment supplier’s safety and security procedures and other reasonable requirements, and otherwise conduct themselves in a manner that does not interfere with Design-Builder’s, Subcontractor’s or equipment supplier’s activities or operations. 7.2.3 Design-Builder shall provide to Owner a Performance Test report (excluding results from air emissions testing), including all applicable test data, calculations and certificates indicating the results of the Performance Tests and, within five (5) business days of Owner’s receipt of such results, Owner, Independent Engineer and Design-Builder will jointly inspect such Work and review the results of the Performance Tests to verify that the Performance Guarantee Criteria have been met. If Owner or Independent Engineer reasonably determines that the Performance Guarantee Criteria have not been met, Owner shall notify Design-Builder the reasons why Owner determined that the Performance Guarantee Criteria have not been met and Design-Builder shall promptly take such action or perform such additional work as will achieve the Performance Guarantee Criteria and shall issue to the Owner another notice in accordance with Section 7.2.2; provided however that if the notice relates to a retest, the notice may be provided no less than two (2) business days prior to the Performance Tests. Such procedure shall be repeated as necessary until Owner and Independent Engineer verifies that the Performance Guarantee Criteria have been met. 7.2.4 If Owner, for whatever reason, prevents Design-Builder from demonstrating the Performance Guarantee Criteria within thirty (30) Days of Design-Builder’s notice that the Plant is ready for Performance Testing, then Design-Builder shall be excused from demonstrating compliance with the Performance Guarantee Criteria during such period of time that Design-Builder is prevented from demonstrating compliance with the Performance Guarantee Criteria; provided however that Design-Builder will be deemed to have fulfilled all of its obligations to demonstrate that the Plant meets the Performance Guarantee Criteria should such period of time during which Design-Builder is prevented from demonstrating the Performance Criteria exceed thirty (30) Days or extend beyond the Final Completion Date.

  • Year 2000 Compatibility Take all action necessary to assure that its computer based systems are able to operate and effectively process data including dates on and after January 1, 2000, and, at the reasonable request of the Administrative Agent or the Required Lenders, provide evidence to the Lenders of such year 2000 compatibility.

  • Internal Controls and Procedures The Company has established and maintains disclosure controls and procedures and internal control over financial reporting (as such terms are defined in paragraphs (e) and (f), respectively, of Rule 13a-15 under the Exchange Act) as required by Rule 13a-15 under the Exchange Act. The Company’s disclosure controls and procedures are reasonably designed to ensure that all material information required to be disclosed by the Company in the reports that it files or furnishes under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the SEC, and that all such material information is accumulated and communicated to the Company’s management as appropriate to allow timely decisions regarding required disclosure and to make the certifications required pursuant to Sections 302 and 906 of the Xxxxxxxx-Xxxxx Act of 2002 (the “Xxxxxxxx-Xxxxx Act”). The Company’s management has completed an assessment of the effectiveness of the Company’s internal controls over financial reporting in compliance with the requirements of Section 404 of the Xxxxxxxx-Xxxxx Act for the year ended December 31, 2010 and such assessment concluded that such controls were effective. Based on its most recent evaluation of internal controls over financial reporting prior to the date hereof, management of the Company has disclosed to the Company’s auditors and the audit committee of the Company Board (i) any significant deficiencies and material weaknesses in the design or operation of internal controls over financial reporting that are reasonably likely to adversely affect in any material respect the Company’s ability to report financial information and (ii) any fraud, whether or not material, that involves management or other employees who have a significant role in the Company’s internal control over financial reporting, and each such deficiency, weakness and fraud so disclosed to auditors, if any, has been disclosed to Parent prior to the date hereof.

  • Internal Controls and Compliance with the Xxxxxxxx-Xxxxx Act Except as set forth in the General Disclosure Package, the Company, its subsidiaries and the Company’s Board of Directors (the “Board”) are in compliance with all applicable provisions of Xxxxxxxx-Xxxxx and Exchange Rules. The Company maintains a system of internal controls, including, but not limited to, disclosure controls and procedures, internal controls over accounting matters and financial reporting, an internal audit function and legal and regulatory compliance controls (collectively, “Internal Controls”) that comply with the applicable Securities Laws and are sufficient to provide reasonable assurances that (i) transactions are executed in accordance with management’s general or specific authorizations, (ii) transactions are recorded as necessary to permit preparation of financial statements in conformity with U.S. Generally Accepted Accounting Principles (“GAAP”) and to maintain accountability for assets, (iii) access to assets is permitted only in accordance with management’s general or specific authorization, and (iv) the recorded accounting for assets is compared with the existing assets at reasonable intervals and appropriate action is taken with respect to any differences. The Internal Controls are, or upon consummation of the offering of the Offered Securities will be, overseen by the Audit Committee (the “Audit Committee”) of the Board in accordance with Exchange Rules. The Company has not publicly disclosed or reported to the Audit Committee or the Board, and within the next 135 days the Company does not reasonably expect to publicly disclose or report to the Audit Committee or the Board, a significant deficiency, material weakness, change in Internal Controls or fraud involving management or other employees who have a significant role in Internal Controls, any violation of, or failure to comply with, the Securities Laws, or any matter which, if determined adversely, would result in a Material Adverse Effect.

  • Access Controls The system providing access to PHI COUNTY discloses to 20 CONTRACTOR or CONTRACTOR creates, receives, maintains, or transmits on behalf of COUNTY 21 must use role based access controls for all user authentications, enforcing the principle of least privilege.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!