Common use of Trade Compliance Clause in Contracts

Trade Compliance. Customer’s purchase of licenses for Software and access to related technology (“Materials”) are for its own use, not for resale, export, re-export, or transfer. Customer is subject to and responsible for compliance with the export control and economic sanctions laws of the United States and other applicable jurisdictions. Materials may not be used, sold, leased, exported, imported, re-exported, or transferred except with prior written authorization by RSA. or its Affiliates and in compliance with such laws, including, without limitation, export licensing requirements, end-user, end-use, and end-destination restrictions, and prohibitions on dealings with sanctioned individuals and entities, including but not limited to persons on the Office of Foreign Assets Control's Specially Designated Nationals and Blocked Persons List or the U.S. Department of Commerce Denied Persons List. Customer represents and warrants that it is not the subject or target of, and that Customer is not located in a country or territory (including without limitation, North Korea, Cuba, Iran, Syria, and Crimea) that is the subject or target of, economic sanctions of the United States or other applicable jurisdictions. Customer understands and will comply with all applicable provisions of the U.S. Arms Export Control Act (AECA) and the U.S. International Traffic in Arms Regulations (ITAR) in Customer’s receipt, use, transfer, modification, or disposal of Software. Customer acknowledges that any use, modification, or integration of the Software in or with defense articles or in the provision of defense services is not authorized by RSA, and that RSA will not provide warranty, repair, customer support, or other services in connection with such end uses. Customer certifies that any software, disk images, or other data provided to RSA in connection with the purchase of the Software will not contain technical data, software, or technology controlled by the ITAR or AECA, and that if Customer later returns the Software to RSA or grants RSA access to the Software, Customer will not include or otherwise make available to RSA any such technical data, software, or technology. Customer agrees to indemnify and hold RSA harmless for any liability, loss, damage, cost, expense, or penalty arising from Customer’s non-compliance with the AECA, ITAR, or the provisions of this Section.

Trade Compliance. Customer’s purchase of licenses for Software and access to related technology (“Materials”) are for its own use, not for resale, export, re-export, or transfer. Customer is subject to and responsible for compliance with the export control and economic sanctions laws of the United States and other applicable jurisdictions. Materials may not be used, sold, leased, exported, imported, re-re- exported, or transferred except with prior written authorization by RSA. RSA or its Affiliates and in compliance with such laws, including, without limitation, export licensing requirements, end-user, end-use, and end-destination restrictions, and prohibitions on dealings with sanctioned individuals and entities, including but not limited to persons on the Office of Foreign Assets Control's Specially Designated Nationals and Blocked Persons List or the U.S. Department of Commerce Denied Persons List. Customer represents and warrants that it is not the subject or target of, and that Customer is not located in a country or territory (including without limitation, North Korea, Cuba, Iran, Syria, and Crimea) that is the subject or target of, economic sanctions of the United States or other applicable jurisdictions. Customer understands and will comply with all applicable provisions of the U.S. Arms Export Control Act (AECA) and the U.S. International Traffic in Arms Regulations (ITAR) in Customer’s receipt, use, transfer, modification, or disposal of Software. Customer acknowledges that any use, modification, or integration of the Software in or with defense articles or in the provision of defense services is not authorized by RSA, and that RSA will not provide warranty, repair, customer support, or other services in connection with such end uses. Customer certifies that any software, disk images, or other data provided to RSA in connection with the purchase of the Software will not contain technical data, software, or technology controlled by the ITAR or AECA, and that if Customer later returns the Software to RSA or grants RSA access to the Software, Customer will not include or otherwise make available to RSA any such technical data, software, or technology. Customer agrees to indemnify and hold RSA harmless for any liability, loss, damage, cost, expense, or penalty arising from Customer’s non-compliance with the AECA, ITAR, or the provisions of this Section.

Trade Compliance. Customer’s evaluation and purchase of licenses for Software and access to related technology (“Materials”) are for its own use, not for resale, export, re-export, or transfer. Customer is subject to and responsible for compliance with the export control and economic sanctions laws of the United States and other applicable jurisdictions. Materials may not be used, sold, leased, exported, imported, re-exported, or transferred except with prior written authorization by RSA. or its Affiliates affiliates and in compliance with such laws, including, without limitation, export licensing requirements, end-user, end-use, and end-destination restrictions, and prohibitions on dealings with sanctioned individuals and entities, including but not limited to persons on the Office of Foreign Assets Control's Specially Designated Nationals and Blocked Persons List or the U.S. Department of Commerce Denied Persons List. Customer represents and warrants that it is not the subject or target of, and that Customer is not located in a country or territory (including without limitation, North Korea, Cuba, Iran, Syria, and Crimea) that is the subject or target of, economic sanctions of the United States or other applicable jurisdictions. Customer understands and will comply with all applicable provisions of the U.S. Arms Export Control Act (AECA) and the U.S. International Traffic in Arms Regulations (ITAR) in Customer’s receipt, use, transfer, modification, or disposal of Software. Customer acknowledges that any use, modification, or integration of the Software in or with defense articles or in the provision of defense services is not authorized by RSA, and that RSA will not provide warranty, repair, customer support, or other services in connection with such end uses. Customer certifies that any software, disk images, or other data provided to RSA in connection with the purchase of the Software will not contain technical data, software, or technology controlled by the ITAR or AECA, and that if Customer later returns the Software to RSA or grants RSA access to the Software, Customer will not include or otherwise make available to RSA any such technical data, software, or technology. Customer agrees to indemnify and hold RSA harmless for any liability, loss, damage, cost, expense, or penalty arising from Customer’s non-compliance with the AECA, ITAR, or the provisions of this Section.

Trade Compliance. Customer’s evaluation and purchase of licenses for Software and access to related technology (“Materials”) are for its own use, not for resale, export, re-export, or transfer. Customer is subject to and responsible for compliance with the export control and economic sanctions laws of the United States and other applicable jurisdictions. Materials may not be used, sold, leased, exported, imported, re-exported, or transferred except with prior written authorization by RSA. SecurID, or its Affiliates affiliates and in compliance with such laws, including, without limitation, export licensing requirements, end-user, end-use, and end-destination restrictions, and prohibitions on dealings with sanctioned individuals and entities, including but not limited to persons on the Office of Foreign Assets Control's Specially Designated Nationals and Blocked Persons List or the U.S. Department of Commerce Denied Persons List. Customer represents and warrants that it is not the subject or target of, and that Customer is not located in a country or territory (including without limitation, North Korea, Cuba, Iran, Syria, and Crimea) that is the subject or target of, economic sanctions of the United States or other applicable jurisdictions. Customer understands and will comply with all applicable provisions of the U.S. Arms Export Control Act (AECA) and the U.S. International Traffic in Arms Regulations (ITAR) in Customer’s receipt, use, transfer, modification, or disposal of Software. Customer acknowledges that any use, modification, or integration of the Software in or with defense articles or in the provision of defense services is not authorized by RSASecurID, and that RSA SecurID will not provide warranty, repair, customer support, or other services in connection with such end uses. Customer certifies that any software, disk images, or other data provided to RSA SecurID in connection with the purchase of the Software will not contain technical data, software, or technology controlled by the ITAR or AECA, and that if Customer later returns the Software to RSA SecurID or grants RSA SecurID access to the Software, Customer will not include or otherwise make available to RSA SecurID any such technical data, software, or technology. Customer agrees to indemnify and hold RSA SecurID harmless for any liability, loss, damage, cost, expense, or penalty arising from Customer’s non-compliance with the AECA, ITAR, or the provisions of this Section.

Trade Compliance. Customer’s evaluation and purchase of licenses for Software and access to related technology (“Materials”) are for its own use, not for resale, export, re-export, or transfer. Customer is subject to and responsible for compliance with the export control and economic sanctions laws of the United States and other applicable jurisdictions. Materials may not be used, sold, leased, exported, imported, re-exported, or transferred except with prior written authorization by RSA. NetWitness, or its Affiliates affiliates and in compliance with such laws, including, without limitation, export licensing requirements, end-user, end-use, and end-destination restrictions, and prohibitions on dealings with sanctioned individuals and entities, including but not limited to persons on the Office of Foreign Assets Control's Specially Designated Nationals and Blocked Persons List or the U.S. Department of Commerce Denied Persons List. Customer represents and warrants that it is not the subject or target of, and that Customer is not located in a country or territory (including without limitation, North Korea, Cuba, Iran, Syria, and Crimea) that is the subject or target of, economic sanctions of the United States or other applicable jurisdictions. Customer understands and will comply with all applicable provisions of the U.S. Arms Export Control Act (AECA) and the U.S. International Traffic in Arms Regulations (ITAR) in Customer’s receipt, use, transfer, modification, or disposal of Software. Customer acknowledges that any use, modification, or integration of the Software in or with defense articles or in the provision of defense services is not authorized by RSANetWitness, and that RSA NetWitness will not provide warranty, repair, customer support, or other services in connection with such end uses. Customer certifies that any software, disk images, or other data provided to RSA NetWitness in connection with the purchase of the Software will not contain technical data, software, or technology controlled by the ITAR or AECA, and that if Customer later returns the Software to RSA NetWitness or grants RSA NetWitness access to the Software, Customer will not include or otherwise make available to RSA NetWitness any such technical data, software, or technology. Customer agrees to indemnify and hold RSA NetWitness harmless for any liability, loss, damage, cost, expense, or penalty arising from Customer’s non-compliance with the AECA, ITAR, or the provisions of this Section.

Trade Compliance. Customer’s purchase of licenses for Software and access to related technology (“Materials”) are for its own use, not for resale, export, re-export, or transfer. Customer is subject to and responsible for compliance with the export control and economic sanctions laws of the United States and other applicable jurisdictions. Materials may not be used, sold, leased, exported, imported, re-exported, or transferred except with prior written authorization by RSASecurID. or its Affiliates and in compliance with such laws, including, without limitation, export licensing requirements, end-user, end-use, and end-end- destination restrictions, and prohibitions on dealings with sanctioned individuals and entities, including but not limited to persons on the Office of Foreign Assets Control's Specially Designated Nationals and Blocked Persons List or the U.S. Department of Commerce Denied Persons List. Customer represents and warrants that it is not the subject or target of, and that Customer is not located in a country or territory (including without limitation, North Korea, Cuba, Iran, Syria, and Crimea) that is the subject or target of, economic sanctions of the United States or other applicable jurisdictions. Customer understands and will comply with all applicable provisions of the U.S. Arms Export Control Act (AECA) and the U.S. International Traffic in Arms Regulations (ITAR) in Customer’s receipt, use, transfer, modification, or disposal of Software. Customer acknowledges that any use, modification, or integration of the Software in or with defense articles or in the provision of defense services is not authorized by RSASecurID, and that RSA SecurID will not provide warranty, repair, customer support, or other services in connection with such end uses. Customer certifies that any software, disk images, or other data provided to RSA SecurID in connection with the purchase of the Software will not contain technical data, software, or technology controlled by the ITAR or AECA, and that if Customer later returns the Software to RSA SecurID or grants RSA SecurID access to the Software, Customer will not include or otherwise make available to RSA SecurID any such technical data, software, or technology. Customer agrees to indemnify and hold RSA SecurID harmless for any liability, loss, damage, cost, expense, or penalty arising from Customer’s non-compliance with the AECA, ITAR, or the provisions of this Section.

Trade Compliance. Customer’s purchase of licenses for Software and access to related technology (“Materials”) are for its own use, not for resale, export, re-export, or transfer. Customer is subject to and responsible for compliance with the export control and economic sanctions laws of the United States and other applicable jurisdictions. Materials may not be used, sold, leased, exported, imported, re-exported, or transferred except with prior written authorization by RSAOutseer. or its Affiliates and in compliance with such laws, including, without limitation, export licensing requirements, end-user, end-use, and end-destination restrictions, and prohibitions on dealings with sanctioned individuals and entities, including but not limited to persons on the Office of Foreign Assets Control's Specially Designated Nationals and Blocked Persons List or the U.S. Department of Commerce Denied Persons List. Customer represents and warrants that it is not the subject or target of, and that Customer is not located in a country or territory (including without limitation, North Korea, Cuba, Iran, Syria, and Crimea) that is the subject or target of, economic sanctions of the United States or other applicable jurisdictions. Customer understands and will comply with all applicable provisions of the U.S. Arms Export Control Act (AECA) and the U.S. International Traffic in Arms Regulations (ITAR) in Customer’s receipt, use, transfer, modification, or disposal of Software. Customer acknowledges that any use, modification, or integration of the Software in or with defense articles or in the provision of defense services is not authorized by RSAOutseer, and that RSA Outseer will not provide warranty, repair, customer support, or other services in connection with such end uses. Customer certifies that any software, disk images, or other data provided to RSA Outseer in connection with the purchase of the Software will not contain technical data, software, or technology controlled by the ITAR or AECA, and that if Customer later returns the Software to RSA Outseer or grants RSA Outseer access to the Software, Customer will not include or otherwise make available to RSA Outseer any such technical data, software, or technology. Customer agrees to indemnify and hold RSA Outseer harmless for any liability, loss, damage, cost, expense, or penalty arising from Customer’s non-non- compliance with the AECA, ITAR, or the provisions of this Section.

Trade Compliance. Customer’s purchase of licenses for Software and access to related technology (“Materials”) are for its own use, not for resale, export, re-export, or transfer. Customer is subject to and responsible for compliance with the export control and economic sanctions laws of the United States and other applicable jurisdictions. Materials may not be used, sold, leased, exported, imported, re-exported, or transferred except with prior written authorization by RSA. RedSeal or its Affiliates and in compliance with such laws, including, without limitation, export licensing requirements, end-user, end-use, and end-destination restrictions, and prohibitions on dealings with sanctioned individuals and entities, including but not limited to persons on the Office of Foreign Assets Control's Specially Designated Nationals and Blocked Persons List or the U.S. Department of Commerce Denied Persons List. Customer represents and warrants that it is not the subject or target of, and that Customer is not located in a country or territory (including without limitation, North Korea, Cuba, Iran, Syria, and Crimea) that is the subject or target of, economic sanctions of the United States or other applicable jurisdictions. Customer understands and will comply with all applicable provisions of the U.S. Arms Export Control Act (AECA) and the U.S. International Traffic in Arms Regulations (ITAR) in Customer’s receipt, use, transfer, modification, or disposal of Software. Customer acknowledges that any use, modification, or integration of the Software in or with defense articles or in the provision of defense services is not authorized by RSARedSeal, and that RSA RedSeal will not provide warranty, repair, customer support, or other services in connection with such end uses. Customer certifies that any software, disk images, or other data provided to RSA RedSeal in connection with the purchase of the Software will not contain technical data, software, or technology controlled by the ITAR or AECA, and that if Customer later returns the Software to RSA RedSeal or grants RSA RedSeal access to the Software, Customer will not include or otherwise make available to RSA RedSeal any such technical data, software, or technology. Customer agrees to indemnify and hold RSA RedSeal harmless for any liability, loss, damage, cost, expense, or penalty arising from Customer’s non-compliance with the AECA, ITAR, or the provisions of this Section.

Trade Compliance. Customer’s evaluation and purchase of licenses for Software and access to related technology (“Materials”) are for its own use, not for resale, export, re-export, or transfer. Customer is subject to and responsible for compliance with the export control and economic sanctions laws of the United States and other applicable jurisdictions. Materials may not be used, sold, leased, exported, imported, re-exported, or transferred except with prior written authorization by RSA. , or its Affiliates affiliates and in compliance with such laws, including, without limitation, export licensing requirements, end-user, end-use, and end-destination restrictions, and prohibitions on dealings with sanctioned individuals and entities, including but not limited to persons on the Office of Foreign Assets Control's Specially Designated Nationals and Blocked Persons List or the U.S. Department of Commerce Denied Persons List. Customer represents and warrants that it is not the subject or target of, and that Customer is not located in a country or territory (including without limitation, North Korea, Cuba, Iran, Syria, and Crimea) that is the subject or target of, economic sanctions of the United States or other applicable jurisdictions. Customer understands and will comply with all applicable provisions of the U.S. Arms Export Control Act (AECA) and the U.S. International Traffic in Arms Regulations (ITAR) in Customer’s receipt, use, transfer, modification, or disposal of Software. Customer acknowledges that any use, modification, or integration of the Software in or with defense articles or in the provision of defense services is not authorized by RSA, and that RSA will not provide warranty, repair, customer support, or other services in connection with such end uses. Customer certifies that any software, disk images, or other data provided to RSA in connection with the purchase of the Software will not contain technical data, software, or technology controlled by the ITAR or AECA, and that if Customer later returns the Software to RSA or grants RSA access to the Software, Customer will not include or otherwise make available to RSA any such technical data, software, or technology. Customer agrees to indemnify and hold RSA harmless for any liability, loss, damage, cost, expense, or penalty arising from Customer’s non-compliance with the AECA, ITAR, or the provisions of this Section.

Trade Compliance. Customer’s purchase of licenses for Software and access to related technology (“Materials”) are for its own use, not for resale, export, re-export, or transfer. Customer is subject to and responsible for compliance with the export control and economic sanctions laws of the United States and other applicable jurisdictions. Materials may not be used, sold, leased, exported, imported, re-exported, or transferred except with prior written authorization by RSA. or its Affiliates and in compliance with such laws, including, without limitation, export licensing requirements, end-user, end-use, and end-destination restrictions, and prohibitions on dealings with sanctioned individuals and entities, including but not limited to persons on the Office of Foreign Assets Control's Specially Designated Nationals and Blocked Persons List or the U.S. Department of Commerce Denied Persons List. Customer represents and warrants that it is not the subject or target of, and that Customer is not located in a ina country or territory (including without limitation, North Korea, Cuba, Iran, Syria, and Crimea) that is the subject or target of, economic sanctions of the United States or other applicable jurisdictions. Customer understands and will comply with all applicable provisions of the U.S. Arms Export Control Act (AECA) and the U.S. International Traffic in Arms Regulations (ITAR) in Customer’s receipt, use, transfer, modification, or disposal of Software. Customer acknowledges that any use, modification, or integration of the Software in or with defense articles or in the provision of defense services is not authorized by RSA, and that RSA will not provide warranty, repair, customer support, or other services in connection with such end uses. Customer certifies that any software, disk images, or other data provided to RSA in connection with the purchase of the Software will not contain technical data, software, or technology controlled by the ITAR or AECA, and that if Customer later returns the Software to RSA or grants RSA access to the Software, Customer will not include or otherwise make available to RSA any such technical data, software, or technology. Customer agrees to indemnify and hold RSA harmless for any liability, loss, ,damage, cost, expense, or penalty arising from Customer’s non-compliance with the AECA, ITAR, or the provisions of this Section.

Trade Compliance. Customer’s purchase of licenses for Software and access to related technology (“Materials”) are for its own use, not for resale, export, re-export, or transfer. Customer is subject to and responsible for compliance with the export control and economic sanctions laws of the United States and other applicable jurisdictions. Materials may not be used, sold, leased, exported, imported, re-exported, or transferred except with prior written authorization by RSA. or its Affiliates and in compliance with such laws, including, without limitation, export licensing requirements, end-user, end-use, and end-end- destination restrictions, and prohibitions on dealings with sanctioned individuals and entities, including but not limited to persons on the Office of Foreign Assets Control's Specially Designated Nationals and Blocked Persons List or the U.S. Department of Commerce Denied Persons List. Customer represents and warrants that it is not the subject or target of, and that Customer is not located in a country or territory (including without limitation, North Korea, Cuba, Iran, Syria, and Crimea) that is the subject or target of, economic sanctions of the United States or other applicable jurisdictions. Customer understands and will comply with all applicable provisions of the U.S. Arms Export Control Act (AECA) and the U.S. International Traffic in Arms Regulations (ITAR) in Customer’s receipt, use, transfer, modification, or disposal of Software. Customer acknowledges that any use, modification, or integration of the Software in or with defense articles or in the provision of defense services is not authorized by RSA, and that RSA will not provide warranty, repair, customer support, or other services in connection with such end uses. Customer certifies that any software, disk images, or other data provided to RSA in connection with the purchase of the Software will not contain technical data, software, or technology controlled by the ITAR or AECA, and that if Customer later returns the Software to RSA or grants RSA access to the Software, Customer will not include or otherwise make available to RSA any such technical data, software, or technology. Customer agrees to indemnify and hold RSA harmless for any liability, loss, damage, cost, expense, or penalty arising from Customer’s non-compliance with the AECA, ITAR, or the provisions of this Section.

Trade Compliance. Customer’s purchase of licenses for Software and access to related technology (“Materials”) are for its own use, not for resale, export, re-export, or transfer. Customer is subject to and responsible for compliance with the export control and economic sanctions laws of the United States and other applicable jurisdictions. Materials may not be used, sold, leased, exported, imported, re-exported, or transferred except with prior written authorization by RSA. RSA or its Affiliates and in compliance with such laws, including, without limitation, export licensing requirements, end-user, end-use, and end-end- destination restrictions, and prohibitions on dealings with sanctioned individuals and entities, including but not limited to persons on the Office of Foreign Assets Control's Specially Designated Nationals and Blocked Persons List or the U.S. Department of Commerce Denied Persons List. Customer represents and warrants that it is not the subject or target of, and that Customer is not located in a country or territory (including without limitation, North Korea, Cuba, Iran, Syria, and Crimea) that is the subject or target of, economic sanctions of the United States or other applicable jurisdictions. Customer understands and will comply with all applicable provisions of the U.S. Arms Export Control Act (AECA) and the U.S. International Traffic in Arms Regulations (ITAR) in Customer’s receipt, use, transfer, modification, or disposal of Software. Customer acknowledges that any use, modification, or integration of the Software in or with defense articles or in the provision of defense services is not authorized by RSA, and that RSA will not provide warranty, repair, customer support, or other services in connection with such end uses. Customer certifies that any software, disk images, or other data provided to RSA in connection with the purchase of the Software will not contain technical data, software, or technology controlled by the ITAR or AECA, and that if Customer later returns the Software to RSA or grants RSA access to the Software, Customer will not include or otherwise make available to RSA any such technical data, software, or technology. Customer agrees to indemnify and hold RSA harmless for any liability, loss, damage, cost, expense, or penalty arising from Customer’s non-compliance with the AECA, ITAR, or the provisions of this Section.

Trade Compliance. Customer’s purchase of licenses for Software and access to related technology (“Materials”) are for its own use, not for resale, export, re-export, or transfer. Customer End User is subject to and responsible for compliance with the export control and economic sanctions laws of the United States and other applicable jurisdictions. Materials may not be used, sold, leased, exported, imported, re-exported, or transferred except with prior written authorization by RSA. Dell Inc. or its Affiliates and in compliance with such laws, including, without limitation, export licensing requirements, end-user, end-use, and end-destination restrictions, and prohibitions on dealings with sanctioned individuals and entities, including but not limited to persons on the Office of Foreign Assets Control's Specially Designated Nationals and Blocked Persons List or the U.S. Department of Commerce Denied Persons List. Customer End User represents and warrants that it is not the subject or target of, and that Customer End User is not located in a country or territory (including without limitation, North Korea, Cuba, Iran, Syria, and Crimea) that is the subject or target of, economic sanctions of the United States or other applicable jurisdictions. Customer End User understands and will comply with all applicable provisions of the U.S. Arms Export Control Act (AECA) and the U.S. International Traffic in Arms Regulations (ITAR) in CustomerEnd User’s receipt, use, transfer, modification, or disposal of Software. Customer End User acknowledges that any use, modification, or integration of the Software in or with defense articles or in the provision of defense services is not authorized by RSAany Licensor, and that RSA Licensors will not provide warranty, repair, customer support, or other services in connection with such end uses. Customer End User certifies that any software, disk images, or other data provided to RSA Licensor in connection with the purchase of the Software will not contain technical data, software, or technology controlled by the ITAR or AECA, and that if Customer End User later returns the Software to RSA Licensor or grants RSA Licensor access to the Software, Customer End User will not include or otherwise make available to RSA Licensor any such technical data, software, or technology. Customer End User agrees to indemnify and hold RSA Licensor harmless for any liability, loss, damage, cost, expense, or penalty arising from CustomerEnd User’s non-compliance with the AECA, ITAR, or the provisions of this Section.

Trade Compliance. Customer’s purchase of licenses for Software and access to related technology (“Materials”) are for its own use, not for resale, export, re-export, or transfer. Customer is subject to and responsible for compliance with the export control and economic sanctions laws of the United States and other applicable jurisdictions. Materials may not be used, sold, leased, exported, imported, re-exported, or transferred except with prior written authorization by RSANetWitness. or its Affiliates and in compliance with such laws, including, without limitation, export licensing requirements, end-user, end-use, and end-end- destination restrictions, and prohibitions on dealings with sanctioned individuals and entities, including but not limited to persons on the Office of Foreign Assets Control's Specially Designated Nationals and Blocked Persons List or the U.S. Department of Commerce Denied Persons List. Customer represents and warrants that it is not the subject or target of, and that Customer is not located in a country or territory (including without limitation, North Korea, Cuba, Iran, Syria, and Crimea) that is the subject or target of, economic sanctions of the United States or other applicable jurisdictions. Customer understands and will comply with all applicable provisions of the U.S. Arms Export Control Act (AECA) and the U.S. International Traffic in Arms Regulations (ITAR) in Customer’s receipt, use, transfer, modification, or disposal of Software. Customer acknowledges that any use, modification, or integration of the Software in or with defense articles or in the provision of defense services is not authorized by RSANetWitness, and that RSA NetWitness will not provide warranty, repair, customer support, or other services in connection with such end uses. Customer certifies that any software, disk images, or other data provided to RSA NetWitness in connection with the purchase of the Software will not contain technical data, software, or technology controlled by the ITAR or AECA, and that if Customer later returns the Software to RSA NetWitness or grants RSA NetWitness access to the Software, Customer will not include or otherwise make available to RSA NetWitness any such technical data, software, or technology. Customer agrees to indemnify and hold RSA NetWitness harmless for any liability, loss, damage, cost, expense, or penalty arising from Customer’s non-non- compliance with the AECA, ITAR, or the provisions of this Section.