Transaction Specification Sample Clauses

Transaction Specification. 12.1 The Contract Specifications provide important information in relation to each market offered by OPTIMA BROK LTD and clients are strongly advised to ensure they understand them. The information provided in the Contract Specifications includes:  Contract months available in each market;  OPTIMA BROK buy/sell spread and/or commission rate for each market;  Min IMR requirements for each market;  Basis of settlement;  Last day of dealing;  Transaction Size specifications;  OPTIMA BROK Quoting hours (in normal trading conditions the various trading times are set out in the Contract Specifications and all times stated in the Terms and Conditions and Contract Specifications relate to UK me);  The applicable interest rate for Overnight Financing; and  Other matters pertinent to various markets. 12.2 OPTIMA BROK has to the best of its ability insured that the Contract Specifications are correct but OPTIMA BROK reserves the right to amend any part of the Contract Specifications at any time. 12.3 Current spreads and/or commission rates on contracts will be quoted to you on request. OPTIMA BROK has the right to vary spreads or commission rates on any contract or vary the Size specifications without notice especially in, but not limited to, volatile market conditions and/or illiquidity of the Underlying Market. At ICM's discretion quoted spreads made via the telephone may differ from the spreads available on an OTP or a DTP.
Sample 1
AutoNDA by SimpleDocs
Transaction Specification. 12.1 The Contract Specifications provide important information in relation to each market offered by GrowFinance LTD and clients are strongly advised to ensure they understand them. The information provided in the Contract Specifications includes:  Contract months available in each market;  GrowFinance buy/sell spread and/or commission rate for each market;  Min IMR requirements for each market;  Basis of settlement;  Last day of dealing;  Transaction Size specifications;  GrowFinance Quoting hours (in normal trading conditions the various trading times are set out in the Contract Specifications and all times stated in the Terms and Conditions and Contract Specifications relate to UK me);  The applicable interest rate for Overnight Financing; and  Other matters pertinent to various markets. 12.2 GrowFinance has to the best of its ability insured that the Contract Specifications are correct but GrowFinance reserves the right to amend any part of the Contract Specifications at any time. 12.3 Current spreads and/or commission rates on contracts will be quoted to you on request. GrowFinance has the right to vary spreads or commission rates on any contract or vary the Size specifications without notice especially in, but not limited to, volatile market conditions and/or illiquidity of the Underlying Market. At ICM's discretion quoted spreads made via the telephone may differ from the spreads available on an OTP or a DTP.
Sample 1
Transaction Specification. 12.1 The Contract Specifications provide important information in relation to each market offered by PandaSt LTD and clients are strongly advised to ensure they understand them. The information provided in the Contract Specifications includes: • Contract months available in each market; • PandaSt buy/sell spread and/or commission rate for each market; • Min IMR requirements for each market; • Basis of settlement; • Last day of dealing; • Transaction Size specifications; • PandaSt Quoting hours (in normal trading conditions the various trading times are set out in the Contract Specifications and all times stated in the Terms and Conditions and Contract Specifications relate to UK me); • The applicable interest rate for Overnight Financing; and • Other matters pertinent to various markets. 12.2 PandaSt has to the best of its ability insured that the Contract Specifications are correct but PandaSt reserves the right to amend any part of the Contract Specifications at any time. 12.3 Current spreads and/or commission rates on contracts will be quoted to you on request. PandaSt has the right to vary spreads or commission rates on any contract or vary the Size specifications without notice especially in, but not limited to, volatile market conditions and/or illiquidity of the Underlying Market. At ICM's discretion quoted spreads made via the telephone may differ from the spreads available on an OTP or a DTP.
Sample 1
Transaction Specification. ‌ 12.1 The Contract Specifications provide important information in relation to each market offered by Kadena-Trade and clients are strongly advised to ensure they understand
Sample 1
Transaction Specification. ‌ 12.1 The Contract Specifications provide important information in relation to each market offered by Яндекс LTD and clients are strongly advised to ensure they understand
Sample 1

Related to Transaction Specification

  • Escrow Format Specification Deposit’s Format. Registry objects, such as domains, contacts, name servers, registrars, etc. will be compiled into a file constructed as described in draft-xxxxx-xxxxxxx-registry-data-escrow, see Part A, Section 9, reference 1 of this Specification and draft-xxxxx-xxxxxxx-dnrd-objects-mapping, see Part A, Section 9, reference 2 of this Specification (collectively, the “DNDE Specification”). The DNDE Specification describes some elements as optional; Registry Operator will include those elements in the Deposits if they are available. If not already an RFC, Registry Operator will use the most recent draft version of the DNDE Specification available at the Effective Date. Registry Operator may at its election use newer versions of the DNDE Specification after the Effective Date. Once the DNDE Specification is published as an RFC, Registry Operator will implement that version of the DNDE Specification, no later than one hundred eighty (180) calendar days after. UTF-8 character encoding will be used.

  • DAF Specifications Developer shall submit initial specifications for the DAF, including System Protection Facilities, to Connecting Transmission Owner and NYISO at least one hundred eighty (180) Calendar Days prior to the Initial Synchronization Date; and final specifications for review and comment at least ninety (90) Calendar Days prior to the Initial Synchronization Date. Connecting Transmission Owner and NYISO shall review such specifications to ensure that the DAF are compatible with the technical specifications, operational control, and safety requirements of the Connecting Transmission Owner and NYISO and comment on such specifications within thirty (30) Calendar Days of Developer’s submission. All specifications provided hereunder shall be deemed to be Confidential Information.

  • Service Specification The Parties have agreed upon the scope and specification of the Services provided under this Service Agreement in the Service Specification.

  • The Specifications The Specifications are that portion of the Contract Documents consisting of the written requirements for materials, equipment, systems, standards and workmanship for the Work, and performance of related services.

  • ODUF Packing Specifications 6.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.

  • Product Specifications (a) Supplier shall manufacture all Products according to the Specifications in effect as of the date of this Agreement, with such changes or additions to the Specifications of the Products related thereto as shall be requested by Buyer in accordance with this Section or as otherwise agreed in writing by the Parties. All other Products shall be manufactured with such Specifications as the Parties shall agree in writing. (b) Buyer may request changed or additional Specifications for any Product by delivering written notice thereof to Supplier not less than one hundred twenty (120) days in advance of the first Firm Order for such Product to be supplied with such changed or additional Specifications. Notwithstanding the foregoing, if additional advance time would reasonably be required in order to implement the manufacturing processes for production of a Product with any changed or additional Specifications, and to commence manufacture and delivery thereof, Supplier shall so notify Buyer, and Supplier shall not be required to commence delivery of such Product until the passage of such additional time. (c) Supplier shall be required to accommodate any change of, or additions to, the Specifications for any Product, if and only if (i) in Supplier’s good faith judgment, such changed or additional Specifications would not require Supplier to violate good manufacturing practice, (ii) the representation and warranty of Buyer deemed made pursuant to Subsection (e) below is true and correct, and (iii) Buyer agrees to reimburse Supplier for the incremental costs and expenses incurred by Supplier in accommodating the changed or additional Specifications, including the costs of acquiring any new machinery and tooling. For the avoidance of doubt, such costs and expenses shall be payable by Buyer separately from the cost of Products at such time or times as Supplier shall request. (d) Supplier shall notify Buyer in writing within thirty (30) days of its receipt of any request for changed or additional Specifications (i) whether Supplier will honor such changed or additional Specifications, (ii) if Supplier declines to honor such changed or additional Specifications, the basis therefor and (iii) if applicable, the estimated costs and expenses that Buyer will be required to reimburse Supplier in respect of the requested changes or additions, as provided in Subsection (c) above. Buyer shall notify Supplier in writing within fifteen (15) days after receiving notice of any required reimbursement whether Buyer agrees to assume such reimbursement obligation. (e) By its request for any changed or additional Specifications for any Product, Buyer shall be deemed to represent and warrant to Supplier that the manufacture and sale of the Product incorporating Buyer’s changed or additional Specifications, as a result of such incorporation, will not and could not reasonably be expected to (i) violate or conflict with any contract, agreement, arrangement or understanding to which Buyer and/or any of its Affiliates is a party, including this Agreement and any other contract, agreement, arrangement or understanding with Supplier and/or its Affiliates, (ii) infringe on any trademark, service xxxx, copyright, patent, trade secret or other intellectual property rights of any Person, or (iii) violate any Applicable Law. Buyer shall indemnify and hold Supplier and its Affiliates harmless (including with respect to reasonable attorneys’ fees and disbursements) from any breach of this representation and warranty.

  • Packing Specifications 7.3.1 A pack will contain a minimum of one message record or a maximum of 99,999 message records plus a pack header record and a pack trailer record. One transmission can contain a maximum of 99 packs and a minimum of one pack.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Equipment Specifications All equipment must meet the contract specifications and all federal and State safety codes and regulations in effect at the date of manufacture. All equipment must be Original Equipment Manufacturer (OEM) equipment unless otherwise stated in the contract. All products, materials, supplies, replacement parts, and equipment offered and furnished must be new, of current manufacturer production, and must have been formally announced by the manufacturer as being commercially available, unless otherwise stated in this Contract.

  • Inspection Checklist (Check one)

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!