Transfer of Unpatented Technologies Sample Clauses

Transfer of Unpatented Technologies 
AutoNDA by SimpleDocs

Related to Transfer of Unpatented Technologies

  • Transfer of Technology 1. The Parties agree to exchange views and information on their law and international practices on the protection and enforcement of intellectual property rights, affecting transfer of technology. This shall, in particular, include exchanges on measures to facilitate information flows, business partnerships, and voluntary licensing and subcontracting agreements. Particular attention shall be paid to the conditions necessary to create an adequate enabling environment for technology transfer in the host countries, including issues such as the domestic legal framework and the development of human capital. 2. When measures are taken with regard to technology transfer, the legitimate interests of the intellectual property right holders shall be protected.

  • Technology Discoveries, innovations, Know-How and inventions, whether patentable or not, including computer software, recognized under U.S. law as intellectual creations to which rights of ownership accrue, including, but not limited to, patents, trade secrets, maskworks and copyrights developed under this Agreement.

  • Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.

  • Information Technology The following applies to all contracts for information technology commodities and contractual services. “Information technology” is defined in section 287.012(15), F.S., to have the same meaning as provided in section 282.0041, F.S.

  • Confidentiality and Intellectual Property Rights (a) The parties acknowledge that the information which the disclosing party submits to the receiving party in connection with this Agreement includes disclosing party's confidential and proprietary information, both of a technical and commercial nature. Receiving party agrees not to disclose such information to third parties without disclosing party's prior written consent. (b) The intellectual property rights, copyrights and other rights connected therewith, in respect of drawings, specifications, documents, data and software made available by the Seller to the Buyer shall be owned solely by the Seller and shall remain its property. Buyer is not allowed to permit any third party to fabricate the Products or any parts thereof. (c) The Buyer is obliged to inform the Seller of any intellectual property rights that may exist with respect to the Equipment if Services are rendered for Equipment not supplied by the Seller. In case of third-party claims that may be asserted on the grounds of the existence of intellectual property rights on the Equipment or Products not delivered by the Seller, the Buyer shall indemnify and hold harmless the Seller against any such claims. (d) With regard to software the Seller grants to the Buyer a non-exclusive and non-transmissible right to use the intellectual property right, in machine-readable, object code form, on one system limited to the operation of the agreed Equipment. The software license shall be unlimited in time and free of charge, if not otherwise agreed. Neither the Buyer nor any third party shall modify, reproduce, translate, reverse engineer, transfer from object code to the source code or decompile the Seller´s software. The license does not entitle the Buyer to use the software for any equipment other than the agreed Equipment, to grant sub-licenses or to copy the software documents without the Seller ´s prior written consent. The Buyer is only entitled to make a single copy for backup purposes to be able to reload the system limited to the one agreed Equipment. If the Buyer exchanges the agreed Equipment, new software has to be purchased and installed. In case of termination of the Agreement the license terminates and all copies of the software and the documentation shall be returned to the Seller promptly after termination.

  • EMERGING TECHNOLOGIES The State reserves the right to modify the terms of this Contract or any future Periodic Recruitments, to allow for emerging technologies. OGS reserves the right to include such technology(ies) hereunder or to issue a formal modification or amendment to this Contract.

  • Transfer of Materials To facilitate the conduct of activities under the Research Plan or an Additional Research Plan, as applicable, either Party (the “Transferor Party”) may, at its election, provide Materials to the other Party (the “Transferee Party”) solely as mutually agreed by the Parties or as set forth in the Research Plan or any Additional Research Plan. All such Materials (a) will remain the sole property of the Transferor Party, (b) will be used only in the exercise if the Transferee Party’s rights or fulfillment of the Transferee Party’s obligations under this Agreement, (c) except as provided in the Research Plan or Additional Research Plan or as otherwise agreed by the Parties, (i) will remain solely under the control of the Transferee Party, (ii) will not be used or delivered by the Transferee Party to or for the benefit of any Third Party, and (iii) will not be used in research or testing involving human subjects, and (d) will be subject to all additional restrictions and obligations that the Transferor Party has identified in a written notice to the Transferee Party as being necessary for the Transferor Party to comply with its obligations to Third Parties with respect to the applicable Material, which notice is provided at or prior to the delivery of such Materials to the Transferee Party. Without limitation to ARTICLE 7, all Materials supplied under this Section 2.1.9 are supplied “as is”, with no warranties of fitness for a particular purpose, and must be used with prudence and appropriate caution in any experimental work, as not all of their characteristics may be known. Following the completion of the activities for which the applicable Materials were supplied under this Section 2.1.9 or upon the Transferor Party’s earlier request, the Transferee Party will either destroy or return to the Transferor Party, at the Transferor Party’s sole discretion, all Materials provided by the Transferor Party that are unused; provided that Vertex will have the right to retain and continue to use any Materials provided by Company that Vertex has the right to Exploit under the license granted to Vertex pursuant to Section 4.1.1.

  • INTELLECTUAL PROPERTY RIGHTS - INVENTION AND PATENT RIGHTS A. General 1. NASA has determined that 51 U.S.C. § 20135(b) does not apply to this Agreement. Therefore, title to inventions made (conceived or first actually reduced to practice) under this Agreement remain with the respective inventing party(ies). No invention or patent rights are exchanged or granted under this Agreement, except as provided herein.

  • New Technology When new or updated technology is introduced into a workplace, it will be the responsibility of the employer to provide appropriate and, if necessary, ongoing training to the employees directly affected. Such training will include any health and safety implications or information that will enable employees to operate the equipment without discomfort and will help maintain their general well-being.

  • Inventions (i) The Employee acknowledges and agrees that all ideas, methods, inventions, discoveries, improvements, work products or developments (“Inventions”), whether patentable or unpatentable, (A) that relate to the Employee’s work with the Company, made or conceived by the Employee, solely or jointly with others, during the Employment Term, or (B) suggested by any work that the Employee performs in connection with the Company, either while performing the Employee’s duties to the Company or on the Employee’s own time, but only insofar as the Inventions are related to the Employee’s work as an employee or other service provider to the Company, shall belong exclusively to the Company (or its designee), whether or not patent applications are filed thereon. The Employee will keep full and complete written records (the “Records”), in the manner prescribed by the Company, of all Inventions, and will promptly disclose all Inventions completely and in writing to the Company. The Records shall be the sole and exclusive property of the Company, and the Employee will surrender them upon the termination of the Employment Term, or upon the Company’s request. The Employee will assign to the Company the Inventions and all patents that may issue thereon in any and all countries, whether during or subsequent to the Employment Term, together with the right to file, in the Employee’s name or in the name of the Company (or its designee), applications for patents and equivalent rights (the “Applications”). The Employee will, at any time during and subsequent to the Employment Term, make such applications, sign such papers, take all rightful oaths, and perform all acts as may be requested from time to time by the Company with respect to the Inventions. The Employee will also execute assignments to the Company (or its designee) of the Applications, and give the Company and its attorneys all reasonable assistance (including the giving of testimony) to obtain the Inventions for its benefit, all without additional compensation to the Employee from the Company, but entirely at the Company’s expense. (ii) In addition, the Inventions will be deemed Work for Hire, as such term is defined under the copyright laws of the United States, on behalf of the Company and the Employee agrees that the Company will be the sole owner of the Inventions, and all underlying rights therein, in all media now known or hereinafter devised, throughout the universe and in perpetuity without any further obligations to the Employee. If the Inventions, or any portion thereof, are deemed not to be Work for Hire, the Employee hereby irrevocably conveys, transfers and assigns to the Company, all rights, in all media now known or hereinafter devised, throughout the universe and in perpetuity, in and to the Inventions, including, without limitation, all of the Employee’s right, title and interest in the copyrights (and all renewals, revivals and extensions thereof) to the Inventions, including, without limitation, all rights of any kind or any nature now or hereafter recognized, including without limitation, the unrestricted right to make modifications, adaptations and revisions to the Inventions, to exploit and allow others to exploit the Inventions and all rights to xxx at law or in equity for any infringement, or other unauthorized use or conduct in derogation of the Inventions, known or unknown, prior to the date hereof, including, without limitation, the right to receive all proceeds and damages therefrom. In addition, the Employee hereby waives any so-called “moral rights” with respect to the Inventions. The Employee hereby waives any and all currently existing and future monetary rights in and to the Inventions and all patents that may issue thereon, including, without limitation, any rights that would otherwise accrue to the Employee’s benefit by virtue of the Employee being an employee of or other service provider to the Company.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!