Common use of Unbundled Copper Loop – Non-Designed (UCL-ND Clause in Contracts

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Louisville Telephone Company can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Louisville Telephone Company may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Louisville Telephone Company to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Global Connection can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Global Connection may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Global Connection to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Global Connection may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Southern Telecom can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Southern Telecom may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Southern Telecom to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Southern Telecom may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouthAT&T’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 six thousand (6,000) feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 thirteen hundred (1300) Ohms resistance and in most cases will not exceed 18,000 eighteen thousand (18,000) feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 eighteen thousand (18,000) feet and with less than 1300 thirteen hundred (1300) Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouthAT&T’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Covad can request LMU based on existing procedures for LMU on other Loop Make Up types, for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth AT&T also will make available Loop Testing so that Choice Telephone Company Covad may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.A. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Covad to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouthAT&T’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth AT&T facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Talk America can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Talk America may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Talk America to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-UCL- ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Talk America may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company CCI can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company CCI may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company CCI to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 CCI may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Comm South can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Comm South may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Comm South to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-UCL- ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Comm South may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Xxxx can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Xxxx may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Xxxx to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Xxxx may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR design layout record or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company <<customer_name>> can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company <<customer_name>> may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company <<customer_name>> to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 <<customer_name>> may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company CBX One-Stop can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company CBX One-Stop may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company CBX One-Stop to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-UCL- ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 CBX One-Stop may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 six thousand (6,000) feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 thirteen hundred (1300) Ohms resistance and in most cases will not exceed 18,000 eighteen thousand (18,000) feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 eighteen thousand (18,000) feet and with less than 1300 thirteen hundred (1300) Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company ITC^DeltaCom can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company ITC^DeltaCom may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.A. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company ITC^DeltaCom to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-UCL- ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 ITC^DeltaCom may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Freedom can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Freedom may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Freedom to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Freedom may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Azul Tel can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Azul Tel may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Azul Tel to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Azul Tel may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Telepak Networks can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Telepak Networks may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Telepak Networks to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Telepak Networks may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Granite can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Granite may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Granite to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Granite may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company USA Telecom, Inc. can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company USA Telecom, Inc. may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company USA Telecom, Inc. to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 USA Telecom, Inc. may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Symtelco can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Symtelco may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Symtelco to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Symtelco may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 six thousand (6,000) feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 thirteen hundred (1300) Ohms resistance and in most cases will not exceed 18,000 eighteen thousand (18,000) feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 eighteen thousand (18,000) feet and with less than 1300 thirteen hundred (1300) Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company MRC can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company MRC may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.A. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company MRC to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 MRC may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Pilgrim Telephone Company can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Pilgrim Telephone Company may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Pilgrim Telephone Company to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Pilgrim Telephone may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Sail Telecom can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Sail Telecom may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Sail Telecom to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Sail Telecom may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL- ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Xxxx Communications can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Xxxx Communications may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Xxxx Communications to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Xxxx Communications may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company ACN can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company ACN may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company ACN to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 ACN may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Rent-A-Line can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Rent-A-Line may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Rent-A-Line to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Rent-A-Line may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18kft in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company GulfPines can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company GulfPines may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company GulfPines to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 GulfPines may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridged tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises premise (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18kft in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Victory can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Victory may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Victory to provide a wide-wide range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Victory may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company NGTelecom can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company NGTelecom may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company NGTelecom to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 NGTelecom may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 six thousand (6,000) feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 thirteen hundred (1300) Ohms resistance and in most cases will not exceed 18,000 eighteen thousand (18,000) feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 eighteen thousand (18,000) feet and with less than 1300 thirteen hundred (1300) Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Starlink can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Starlink may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.A. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Starlink to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Starlink may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 six thousand (6,000) feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 thirteen hundred (1300) Ohms resistance and in most cases will not exceed 18,000 eighteen thousand (18,000) feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 eighteen thousand (18,000) feet and with less than 1300 thirteen hundred (1300) Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company NGTelecom can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company NGTelecom may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.A. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company NGTelecom to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 NGTelecom may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL- ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Access Point can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Access Point may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Access Point to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Access Point may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Speedy Reconnect can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Speedy Reconnect may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Speedy Reconnect to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Speedy Reconnect may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Gateway can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Gateway may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Gateway to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Gateway may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 six thousand (6,000) feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 thirteen hundred (1300) Ohms resistance and in most cases will not exceed 18,000 eighteen thousand (18,000) feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 eighteen thousand (18,000) feet and with less than 1300 thirteen hundred (1300) Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Quality Telephone Company can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Quality Telephone Company may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.A. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Quality Telephone Company to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Quality Telephone may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR design layout record or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Tel West can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Tel West may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Tel West to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Tel West may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company D-Tel, Inc. can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company D-Tel, Inc. may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company D-Tel, Inc. to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 D-Tel, Inc. may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Xxxxxx can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Xxxxxx may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Telson to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Telson may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Accutel of Texas, Inc. can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Accutel of Texas, Inc. may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Accutel of Texas, Inc. to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company JCM can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company JCM may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company JCM to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 JCM may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company INET can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company INET may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company INET to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 INET may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Globe can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Globe may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Globe to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Globe may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises premise (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18kft in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Xxxxxxxx.Xxx can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Xxxxxxxx.Xxx may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Xxxxxxxx.Xxx to provide a wide-wide range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises premise (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18kft in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Deland Actel can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Deland Actel may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Deland Actel to provide a wide-wide range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Deland Actel may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL- ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company EveryCall can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company EveryCall may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company EveryCall to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 EveryCall may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company A-Tech Telecom can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company A-Tech Telecom may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company A-Tech Telecom to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 A-Tech Telecom may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company ICG can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company ICG may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company ICG to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 ICG may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Hotline can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Hotline may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Hotline to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Hotline may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18kft in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-UCL- ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Creative Telecom can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Creative Telecom may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Creative Telecom to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Creative Telecom may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridged tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18kft in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Hopkinsville can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Hopkinsville may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Hopkinsville to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Hopkinsville may use BellSouth’s ULM offering to remove bridged tap and/or load coils from any Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company EPICUS can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company EPICUS may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company EPICUS to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 EPICUS may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Triarch Marketing can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Triarch Marketing may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Triarch Marketing to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Triarch Marketing may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Newcomm can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Newcomm may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Newcomm to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Newcomm may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Ruddata can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Ruddata may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Ruddata to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Ruddata may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company DSL can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company DSL may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company DSL to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 DSL may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company SPARDI can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company SPARDI may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company SPARDI to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 SPARDI may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Xxxxxx can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Grande may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Grande to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Grande may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company e-Tel can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company e- Tel may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company e-Tel to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 e-Tel may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in lengthresistance, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signalsqualifying services or qualifying, services together with nonqualifying telecommunications services and information services. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company can request Loop Make Up for which additional charges would applyupon AT&T’s request, BellSouth will provide AT&T with non-discriminatory access to the same detailed information about the loop (e.g., composition, electronics, length, gauge, electrical parameters) that is available to BellSouth in the same time interval it is provided to BellSouth’s retail operations. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company AT&T may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company AT&T to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s significantly degrade other services on the BellSouth network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of an existing BellSouth facilitiescircuit that is currently providing service. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 AT&T may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises premise (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18kft in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company NOW can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company NOW may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company NOW to provide a wide-wide range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company SPARDI can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company SPARDI may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company SPARDI to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 SPARDI may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises premise (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18lft in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company WorldxChange can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company WorldxChange may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company WorldxChange to provide a wide-wide range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-UCL- ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 WorldxChange may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Columbus Local can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Columbus Local may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Columbus Local to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Columbus Local may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Preferred can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Preferred may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Preferred to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Preferred may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company BTI can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company BTI may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company BTI to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 BTI may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Unity Acquisition can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Unity Acquisition may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Unity Acquisition to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Unity Acquisition may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Lightning Communications can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Lightning Communications may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Lightning Communications to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Lightning Communications may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises premise (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end user’s premises premise and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18kft in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-UCL- ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company EPICUS can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company EPICUS may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company EPICUS to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 EPICUS may use BellSouth’s ULM offering to remove bridged tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company TeleConex can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company TeleConex may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company TeleConex to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 TeleConex may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company World Access can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company World Access may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company World Access to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-UCL- ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 World Access may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company NTBS can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company NTBS may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company NTBS to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 NTBS may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company FTS can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company FTS may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company FTS to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 FTS may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises premise (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18kft in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Advantage Group can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Advantage Group may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Advantage Group to provide a wide-wide range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Advantage Group may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company EZ Phone can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company EZ Phone may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company EZ Phone to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 EZ Phone may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company BSE can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company BSE may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company BSE to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 BSE may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises premise (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18kft in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Utility USA can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Utility USA may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Utility USA to provide a wide-wide range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Utility USA may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL- ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company ALTICOMM can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company ALTICOMM may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company ALTICOMM to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-UCL- ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 ALTICOMM may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point.. AMENDMENT EXHIBIT 1 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Excel can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Excel may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Excel to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Excel may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company FeroNetworks can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company FeroNetworks may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company FeroNetworks to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-UCL- ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 FeroNetworks may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 six thousand (6,000) feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 thirteen hundred (1300) Ohms resistance and in most cases will not exceed 18,000 eighteen thousand (18,000) feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 eighteen thousand (18,000) feet and with less than 1300 thirteen hundred (1300) Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Cinergy can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Cinergy may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.A. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Cinergy to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Cinergy may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Deland Actel can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Deland Actel may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Deland Actel to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-UCL- ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Deland Actel may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL- ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company ACI can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company ACI may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company ACI to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 ACI may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Vertex can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Vertex may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Vertex to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Vertex may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Solution Telecom can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Solution Telecom may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Solution Telecom to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Solution Telecom may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company OnePoint can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company OnePoint may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company OnePoint to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 OnePoint may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 six thousand (6,000) feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 thirteen hundred (1300) Ohms resistance and in most cases will not exceed 18,000 eighteen thousand (18,000) feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 eighteen thousand (18,000) feet and with less than 1300 thirteen hundred (1300) Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Aero can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Aero may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.A. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Aero to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Aero may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in lengthresistance, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signalsqualifying services or qualifying, services together with nonqualifying telecommunications services and information services. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company can request Loop Make Up for which additional charges would applyupon AT&T AND TC SYSTEMS’s request, BellSouth will provide AT&T AND TC SYSTEMS with non-discriminatory access to the same detailed information about the loop (e.g., composition, electronics, length, gauge, electrical parameters) that is available to BellSouth in the same time interval it is provided to BellSouth’s retail operations. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company AT&T AND TC SYSTEMS may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company AT&T AND TC SYSTEMS to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s significantly degrade other services on the BellSouth network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of an existing BellSouth facilitiescircuit that is currently providing service. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 AT&T AND TC SYSTEMS may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company MTS Communications can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company MTS Communications may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company MTS Communications to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 MTS Communications may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 2.11.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 six thousand (6,000) feet of bridged tap between the end useruser customer’s premises and the serving wire center. The UCL-ND typically will be 1300 thirteen hundred (1300) Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 eighteen thousand (18,000) feet and with less than 1300 thirteen hundred (1300) Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 2.11.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company KMC Data can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At 2.11.3.3 For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company KMC Data may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.A. 2.4.3.4 2.11.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company KMC Data to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) 2.11.3.5 OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.11.3.6 KMC Data may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company e-Tel can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company e-Tel may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company e-Tel to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 e-Tel may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point.. AMENDMENT EXHIBIT 1 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company VarTec can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company VarTec may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company VarTec to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 VarTec may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 six thousand (6,000) feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 thirteen hundred (1300) Ohms resistance and in most cases will not exceed 18,000 eighteen thousand (18,000) feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 eighteen thousand (18,000) feet and with less than 1300 thirteen hundred (1300) Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Kinetix can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Kinetix may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment.A. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Kinetix to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Kinetix may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises premise (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18kft in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Starlink can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Starlink may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Starlink to provide a wide-wide range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Starlink may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Think 12 can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Think 12 may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Think 12 to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Think 12 may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company GSC can request Loop Make Up for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company GSC may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company GSC to provide a wide-range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 GSC may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises premise (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18kft in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company EZ Phone can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company EZ Phone may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company EZ Phone to provide a wide-wide range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 EZ Phone may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company FLATEL can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company FLATEL may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company FLATEL to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 FLATEL may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises premise (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18kft in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company Micro-Comm can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Micro-Comm may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company Micro-Comm to provide a wide-wide range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-UCL- ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 Micro-Comm may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL- ND could be transformed into Loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company Delta Phones can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company Delta Phones may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company Delta Phones to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-UCL- ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Delta Phones may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR design layout record or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Choice Telephone Company VarTec can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company VarTec may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Choice Telephone Company VarTec to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-UCL- ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 VarTec may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

Unbundled Copper Loop – Non-Designed (UCL-ND. 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame (MDF) to a customer’s premises premise (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet 6kft of bridged tap between the end userEnd User’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet 18kft in length, although the UCL-ND will not have a specific length limitation. For loops Loops less than 18,000 feet 18kft and with less than 1300 Ohms resistance, the loop Loop will provide a voice grade transmission channel suitable for loop Loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up Makeup (LMU) process is not required to order and provision the UCL-ND. However, Choice Telephone Company PLI can request Loop Make Up LMU for which additional charges would apply. 2.4.3.3 At For an additional charge, BellSouth also will make available Loop Testing so that Choice Telephone Company PLI may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B A of this Attachment. 2.4.3.4 UCL-ND loops Loops are not intended to support any particular service and may be utilized by Choice Telephone Company PLI to provide a wide-wide range of telecommunications services so as long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) NID at the customer’s location for the purpose of connecting the loop Loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) OC will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) TS does not apply to this product. 2.4.3.6 PLI may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove excessive bridged taps and/or load coils from any copper Loop within the BellSouth network. Therefore, some Loops that would not qualify as UCL-ND could be transformed into Loops that do qualify, using the ULM process.