Bidding and Proposal Phase 1.5.1 In conjunction with the development of the Guaranteed Maximum Price and at other times as appropriate to the Project, the Architect/Engineer shall assist the Owner and Construction Manager by receiving and recording requests for Bid and Request for Proposal (“RFP”) Documents, receiving and resolving questions about Bid and RFP Documents; preparing addenda, issuing addenda, and accounting for addenda issued; attending pre-bid and pre-proposal conferences and HUB meetings; evaluating bids and proposals; and assisting in preparing and awarding multiple contracts for construction. Architect/Engineer shall answer inquiries from bidders and proposers at Owner’s request, and shall prepare and issue any necessary addenda to the bidding or proposal documents.
Contractor’s Bid or Mini-Bid Proposal f. Unincorporated Appendices (if any).
Additional proposals If the Company at any time during the continuance of this Agreement desires to modify expand or otherwise vary its activities carried on pursuant to this Agreement beyond those specified in any approved proposal, it shall give notice of such desire to the Minister and within 2 months after giving such notice shall submit to the Minister detailed proposals in respect of such modifications expansions or variations and such other matters as the Minister may require. The provisions of clause 4 and 5 (including (for the avoidance of doubt) clause 5(9)) shall apply, the necessary changes being made, to proposals submitted pursuant to this clause.
Cost Proposal After the Approved Working Drawings are approved by Landlord and Tenant, and the Contractor and subcontractors have been selected pursuant to Section 4.1 above, Landlord shall provide Tenant with a cost proposal in accordance with the Approved Working Drawings setting forth the reconciled bids and copies of all sub-bids, which cost proposal shall include, as nearly as possible, the cost of all Tenant Improvement Allowance Items to be incurred in connection with the construction of the Tenant Improvements (the "COST PROPOSAL"). The Cost Proposal shall reflect bids that will be priced by Contractor on an individual item-by-item or trade-by-trade basis. Landlord and Tenant shall work together in good faith in an attempt to agree upon a mutually acceptable Cost Proposal as soon as reasonably possible. Notwithstanding the foregoing, portions of the cost of the Tenant Improvements may be delivered to Tenant as such portions of the Tenant Improvements are priced by Contractor (on an individual item-by-item or trade-by-trade basis), even before the Approved Working Drawings are completed (the "PARTIAL COST PROPOSAL") for purposes of facilitating the early purchase of items and construction of the same. Tenant shall approve and deliver the Cost Proposal to Landlord within seven (7) business days of the receipt of the same, or, as to a Partial Cost Proposal within five (5) business days of receipt of the same, and upon receipt of the same by Landlord, Landlord shall be released by Tenant to purchase the items set forth in the Cost Proposal or Partial Cost Proposal, as the case may be, and to commence the construction relating to such items. If Tenant disapproves the Cost Proposal or Partial Cost Proposal, Tenant shall provide Landlord with a reasonably sufficient explanation, and in such event, Landlord and Tenant shall use good faith, diligent efforts to work with each other and Contractor to address Tenant's reasons for disapproving the Cost Proposal or Partial Cost Proposal, whichever is the case and a new Cost Proposal (or Partial Cost Proposal, as applicable) shall be prepared and the process described in this Section 4.2 shall be repeated. The date by which Tenant must approve and deliver the Cost Proposal or the last Partial Cost Proposal to Landlord, as the case may be, shall be known hereafter as the "COST PROPOSAL DELIVERY DATE". The total of all Partial Cost Proposals, if any, shall be known as the Cost Proposal.
Technical Proposals Technical proposal information will be streamlined, e.g., the Government anticipates written proposals consisting of thirty (30) pages or less stating compliance or exception to requirements, risks, assumptions and conflict of interest issues. Proposals shall not merely restate PWS/SOO requirements. Written technical proposals shall normally address: * Technical Approach and descriptive narrative of the contractor's understanding of the requested effort * PWS in response to a SOO * Integrated Master Plan (if applicable) * Integrated Master Schedule (if applicable) * Key Personnel Assigned * Quantities/Hours of Personnel by Labor Categories and narrative justification (if applicable) * Other Direct Costs (ODCs) (materials and supplies, travel, training, etc.(quantities and types only)) * Period of Performance * Government-Furnished Equipment (GFE)/Government-Furnished Information (GFI) * Security (including clearance level) * Teaming Arrangement (including subcontracting; identify new ACAs) * Small Business Plan (if a large business) * Other Pertinent Data, such as assumptions made.
Financial Proposal Tender Forms – prices By submitting this tender, the tenderer commits to performing this public contract in conformity with the provisions of the Tender Specifications/ – and explicitly declares accepting all conditions listed in the Tender Specifications and renounces any derogatory provisions such as his own general sales conditions. The unit prices and the global prices for each item in the inventory are established relative to the value of these items in relation to the total value of the tender. All general and financial costs as well as the profits are distributed between the various items in proportion to their weight. The value added tax is dealt with on a separate line in the summary bill of quantities or the inventory, to be added to the tender's value. The tenderer commits to performing the public contract in accordance with the provisions of the Tender Specifications for the following prices, given in euros and exclusive of VAT: Should this tender be approved, the performance bond will be constituted under the conditions and deadlines stipulated in the Tender Specifications. The confidential information and/or the information relating to technical or business secrets is indicated clearly in the tender. In order to correctly compare the tenders, the duly signed information or documents mentioned under Preparation of Tenders.
Proposal Work Authorizations The State may issue a proposal work authorization under which the Engineer will submit a proposal for additional work. The proposal must be for additional work that is within the defined scope of work under this contract. The amount to be paid for a proposal work authorization will be a lump sum for each proposal. The lump sum payment will be no less than two percent (2%) and no more than four percent (4%) of the State's estimate of the cost of the additional work. The Engineer may elect without penalty not to submit a proposal in response to a proposal work authorization. Any proposal submitted in response to a proposal work authorization will be the sole property of the State. The State may, at its option, issue similar or identical proposal work authorizations under other contracts, and the proposals submitted in response to the various proposal work authorizations may be compared by the State for the purpose of determining the contract under which the work will be awarded. The determination of the contract under which the work will be awarded will be based on the design characteristics of the proposal and the Engineer's qualifications and will not consider the Engineer's rates.
Technical Proposal The technical proposal may be presented in free format. It shall not exceed ten pages, not counting the CVs. It shall respect the following page limit and structure: • Technical methodology (max. 7 pages) • Quality management (max. 1 page) • Project management (max. 1 page) • Resource management (proposal (max. 1 page) + CVs of experts)
Interview Questions Explanation Why do you want to be a Board member? What specific skills would you bring to the Board? Please give specific examples of your ability in interpersonal relationships and teamwork. What do you see as the role of a Board member? What have you done to prepare yourself for the challenges of being a Board member? Interview questions are at the Board's sole discretion. This list is not exhaustive, but it may help the Board tailor its questions toward finding a candidate who will approach Board membership with a clear understanding of its demands and expectations along with a constructive attitude toward the challenge. The Board may also want to consider allowing an equal amount of time for each interview. Please describe your previous community or non-profit experiences. What areas in the district would you like to see the Board strengthen? See IASB's Recruiting School Board Candidates, available at: xxx.xxxx.xxx/xxxxxxxx/xxxxxxxxxx.xxx A prospective candidate to fill a vacancy may raise other specific issues that the Board will want to cover during an interview. What is your availability to meet the time, training commitments, and other responsibilities required for Board membership? Describe what legacy you would like to leave behind. Conduct interviews with candidates (interviews may occur in closed session pursuant to 5 ILCS 120/2(c)(3)). Interview Plan Explanation In each interview, the Board President will: Introduce Board members to the candidate at the beginning of the interview. Describe the Board's interview process, selection process, and ask the candidate if he or she has questions about the Board's process for filling a vacancy by appointment. Describe the District's philosophy or mission statement. Describe the vacancy for the candidate by reviewing the: (1) qualifications, and (2) general duties and responsibilities of the Board and the Board members, including fiduciary responsibilities, conflict of interest, ethics and gift ban, and general Board member development. Begin asking the interview questions that the Board developed. Ask the candidate whether he or she has any questions for the Board. Thank the candidate and inform the candidate when the Board expects to make a decision and how the candidate will be contacted regarding the Board's decision. The Board President will lead the Board as it interviews prospective candidates. See Board policy 2:110, Qualifications, Term, and Duties of Board Officers. The president presides at all meetings. 105 ILCS 5/10-13. The Board may also want to consider allowing an equal amount of time for each interview. Fill vacancy by a vote during an open meeting of the Board before the 60th day (105 ILCS 5/10-10, amended by P.A. 101-67, eff. 1-1-20). Assist the appointed Board member in filing his or her statement of economic interest (5 ILCS 420/4A-105(c). Announce the appointment to District staff and community. Announcement Explanation The Board appointed [appointee's name] to fill the vacancy on the Board. The appointment will be from [date] to [date]. The Board previously established qualifications for the appointee in a careful and thoughtful manner. [Appointee's name] meets these qualifications and has demonstrated the willingness to accept the duties and responsibilities of a Board member. [Appointee's name] brings a clear understanding of the demands and expectations of being a Board member along with a constructive attitude toward the challenge. The contents of the appointment announcement and length of time it is displayed are at the Board's sole discretion. The Board may want to consider announcing the appointment during its meeting and also by posting it in the same places that it posted the vacancy announcement. See Board policy 8:10, Connection with the Community. Administer the Oath of Office and begin orientation. Guidelines Explanation See Board policy 2:80, Board Member Oath and Conduct. Each individual, before taking his or her seat on the Board, must take an oath in substantially the form given in 105 ILCS 5/10-16.5. See Board policy 2:120, Board Member Development, and 2:120-E, Guidelines for Serving as a Mentor to a NewSchool Board Member. Orientation assists new Board members to learn, understand, and practice effective governance principles. See the IASB Foundational Principles of Effective Governance, available at: xxx.xxxx.xxx/xxxxxxxxxx_xxxxx.xxx. Inform IASB of the newly appointed Board member's name and directory information. DATED : December 16, 2019 Ottawa THSD 140
Solicitation Exceptions/Deviations Explanation If the bidder intends to deviate from the General Conditions Standard Terms and Conditions or Item Specifications listed in this proposal invitation, all such deviations must be listed on this attribute, with complete and detailed conditions and information included or attached. TIPS will consider any deviations in its proposal award decisions, and TIPS reserves the right to accept or reject any bid based upon any deviations indicated below or in any attachments or inclusions. In the absence of any deviation entry on this attribute, the proposer assures TIPS of their full compliance with the Standard Terms and Conditions, Item Specifications, and all other information contained in this Solicitation.
