Vendor Encouraging Members to bypass TIPS agreement Encouraging entities to purchase directly from the Vendor or through another agreement, when the Member has requested using the TIPS cooperative Agreement or price, and thereby bypassing the TIPS Agreement is a violation of the terms and conditions of this Agreement and will result in removal of the Vendor from the TIPS Program.
Publicity and Use of Trademarks or Service Marks 34.1 A Party, its Affiliates, and their respective contractors and Agents, shall not use the other Party’s trademarks, service marks, logos or other proprietary trade dress, in connection with the sale of products or services, or in any advertising, press releases, publicity matters or other promotional materials, unless the other Party has given its written consent for such use, which consent the other Party may grant or withhold in its sole discretion. 34.2 Neither Party may imply any direct or indirect affiliation with or sponsorship or endorsement of it or its services or products by the other Party. 34.3 Any violation of this Section 34 shall be considered a material breach of this Agreement.
CHANGES TO PRODUCT OR SERVICE OFFERINGS a. Product or Service Discontinuance Where Contractor is the Product Manufacturer/Developer, and Contractor publicly announces to all U.S. customers (“date of notice”) that a Product is being withdrawn from the U.S. market or that maintenance service or technical support provided by Contractor (“withdrawn support”) is no longer going to be offered, Contractor shall be required to: (i) notify the Commissioner, each Licensee and each Authorized User then under contract for maintenance or technical support in writing of the intended discontinuance; and (ii) continue to offer Product or withdrawn support upon the Contract terms previously offered for the greater of: a) the best terms offered by Contractor to any other customer, or b) not less than twelve (12) months from the date of notice; and (iii) at Authorized User’s option, provided that the Authorized User is under contract for maintenance on the date of notice, either: provide the Authorized User with a Product replacement or migration path with at least equivalent functionality at no additional charge to enable Authorized User to continue use and maintenance of the Product. In the event that the Contractor is not the Product Manufacturer, Contractor shall be required to: (i) provide the notice required under the paragraph above, to the entities described within five (5) business days of Contractor receiving notice from the Product Manufacturer, and (ii) include in such notice the period of time from the date of notice that the Product Manufacturer will continue to provide Product or withdraw support. The provisions of this subdivision (a) shall not apply or eliminate Contractor’s obligations where withdrawn support is being provided by an independent Subcontractor. In the event that such Subcontractor ceases to provide service, Contractor shall be responsible for subcontracting such service, subject to state approval, to an alternate Subcontractor.
USE OF NASA NAME AND NASA EMBLEMS A. NASA Name and Initials Partner shall not use "National Aeronautics and Space Administration" or "NASA" in a way that creates the impression that a product or service has the authorization, support, sponsorship, or endorsement of NASA, which does not, in fact, exist. Except for releases under the "Release of General Information to the Public and Media" Article, Partner must submit any proposed public use of the NASA name or initials (including press releases and all promotional and advertising use) to the NASA Associate Administrator for the Office of Communications or designee ("NASA Communications") for review and approval. Approval by NASA Office of Communications shall be based on applicable law and policy governing the use of the NASA name and initials. B. NASA Emblems Use of NASA emblems (i.e., NASA Seal, NASA Insignia, NASA logotype, NASA Program Identifiers, and the NASA Flag) is governed by 14 C.F.R. Part 1221. Partner must submit any proposed use of the emblems to NASA Communications for review and approval.
Technical Barriers to Trade 1. The Parties or Signatory Parties shall apply technical regulations, standards and conformity assessment procedures in accordance with the provisions of the WTO Agreement on Technical Barriers to Trade. 2. The Parties or Signatory Parties shall cooperate in the fields of technical regulations, standardization and conformity assessment procedures, with the aim of facilitating trade.
Publicity/Use of Names Neither Party shall use the name, trademark, trade name or logo of the other Party, its Affiliates or their respective employee(s) in any publicity, promotion, news release or disclosure relating to this Agreement or its subject matter, without the prior express written permission of the other Party, except for those disclosures expressly authorized under this Article 4. Following execution of this Agreement, either Party may issue a press release announcing the existence of this Agreement in form and substance agreed to in writing by both Parties, such agreement to not be unreasonably withheld or delayed. Each Party agrees not to issue any other press release or other public statement disclosing other information relating to this Agreement or the transactions contemplated hereby without the prior written consent of the other Party, which consent shall not be unreasonably withheld or delayed; provided that Arvinas agrees that it shall be deemed reasonable for Pfizer to withhold its consent for the disclosure of any information related to a Target or a specific Compound or the amount of any payment made or to be made under this Agreement; and provided further that any disclosure which is required by Law or the rules of a securities exchange, as reasonably advised by the disclosing Party’s counsel, may be made subject to the following. Each Party agrees to provide to the other Party a copy of any public announcement regarding this Agreement or the subject matter thereof as soon as reasonably practicable under the circumstances prior to its scheduled release. Except under extraordinary circumstances or to the extent any such advance notice or notice period is not consistent with applicable Law, each Party shall provide the other with an advance copy of any such announcement at least [**] prior to its scheduled release. Each Party shall have the right to expeditiously review and recommend changes to any such announcement and, except as otherwise required by Law, the Party whose announcement has been reviewed shall remove any information the reviewing Party reasonably deems to be inappropriate for disclosure. The contents of any announcement or similar publicity which has been reviewed and approved by the reviewing Party can be re-released by either Party without a requirement for re-approval. In addition, except to the extent required by Laws in connection with patent enforcement activities conducted in accordance with Article 7, Pfizer shall not use the name “Yale” or “Yale University,” nor any variation or adaptation thereof, nor any trademark, trade name or other designation owned by Yale University, nor the names of any of its trustees, officers, faculty, students, employees or agents, for any purpose without the prior written consent of Yale University in each instance, such consent to be granted or withheld by Yale University in its sole discretion, except that Pfizer may state that it has sublicensed from Yale University one or more of the patents or applications comprising the Yale Licensed Patents.
TRANSFERS AND PROMOTIONS 9.1 Notices for permanent full-time vacancies within this bargaining unit, including full-time entry level positions, shall be posted online though the district website posting system and an email will be sent out to every employee notifying them of the job opening, and a copy of each posting shall be sent to the Union Vice-President. Notices shall be posted five (5) working days prior to the application deadline, unless in an emergency the time frame may be reduced after consulting with the local Vice-President of the Union. No permanent appointment shall be made until after the deadline for filing applications. The positions will be filled, if possible, from those seeking a lateral transfer and if not possible, from those seeking promotion. Part-time employees will be given preference for full-time vacancies over outside applicants. Transfers will be honored according to seniority. Positions that will be or have been vacant for at least 6 months shall be posted within 10 days of the vacancy. Also all posted positions will be filled within 30 days of the vacancy. Vacancies means any permanent separation of employment and does not apply when positions are not being filled due to 7:5. 9.2 Service in a part-time position will be converted to full-time equivalency and used to determine seniority status in bidding for an upgraded position (i.e. four (4) hours per work day equals two (2) years full-time seniority). 9.3 The written notice of a vacancy shall contain: (a) type of vacancy; (b) position description; (c) location and shift; (d) starting date; (e) qualifications; (f) salary; and (g) other relevant information. 9.4 The written notice set forth for a particular position shall not be substantively changed after posting. 9.5 Employees who desire a transfer to a posted position may apply as specified in the posting notice. The decision on transfer requests shall be awarded to the most senior applicant, provided he or she is qualified for the position.
Name; Trade Names and Styles The name of Borrower set forth in the heading to this Agreement is its correct name. Listed on the Schedule are all prior names of Borrower and all of Borrower's present and prior trade names. Borrower shall give Silicon 30 days' prior written notice before changing its name or doing business under any other name. Borrower has complied, and will in the future comply, with all laws relating to the conduct of business under a fictitious business name.
Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.
Sublicense to Use the Scudder Trademarks As exclusive licensee of the rights to use anx xxxxxcense the use of the "Scudder," "Scudder Investments" and "Scudder, Stevens & Clark, Inx." xxxdemaxxx (xxgether, the "Scuddex Xxxxx"), xxx xerexx xxant the Trust a nonexclusive right xxx xxxlicense to use (i) the "Scudder" name and mark as part of the Trust's name (the "Fund Namx"), xxd (ii) the Scudder Marks in connection with the Trust's investment products xxx xxxvices, in each case only for so long as this Agreement, any other investment management agreement between you or any organization which shall have succeeded to your business as investment manager ("your Successor") and the Trust, or any extension, renewal or amendment hereof or thereof remains in effect, and only for so long as you are a licensee of the Scudder Marks, provided however, that you agree to use your best xxxxxxx to maintain your license to use and sublicense the Scudder Marks. The Trust agrees that it shall have no right to suxxxxxxxe or assign rights to use the Scudder Marks, shall acquire no interest in the Scudder Marks othxx xxxx the rights granted herein, that all of txx Xxxxt's uses of the Scudder Marks shall inure to the benefit of Scudder Trust Company xx xxxer and licensor of the Scudder Marks (xxx "Xrademark Owner"), and that the Trust shall nxx xxxxlenge the validity of the Scudder Marks or the Trademark Owner's ownership thereof. The Truxx xxxxher agrees that all services and products it offers in connection with the Scudder Marks shall meet commercially reasonable standards of duaxxxx, xs may be determined by you or the Trademark Owner from time to time, provided that you acknowledge that the services and products the Trust rendered during the one-year period preceding the date of this Agreement are acceptable. At your reasonable request, the Trust shall cooperate with you and the Trademark Owner and shall execute and deliver any and all documents necessary to maintain and protect (including but not limited to in connection with any trademark infringement action) the Scudder Marks and/or enter the Trust as a registered user thereof. Xx xxch time as this Agreement or any other investment management agreement shall no longer be in effect between you (or your Successor) and the Trust, or you no longer are a licensee of the Scudder Marks, the Trust shall (to the extent that, and as soon ax, xx xawfully can) cease to use the Fund Name or any other name indicating that it is advised by, managed by or otherwise connected with you (or your Successor) or the Trademark Owner. In no event shall the Trust use the Scudder Marks or any other name or mark confusingly similar therexx (xxxluding, but not limited to, any name or mark that includes the name "Scudder") if this Agreement or any other investment advisory agrexxxxx xetween you (or your Successor) and the Fund is terminated.
