CHANGES TO PRODUCT OR SERVICE OFFERINGS Sample Clauses

CHANGES TO PRODUCT OR SERVICE OFFERINGS a. Product or Service Discontinuance Where Contractor is the Product Manufacturer/Developer, and Contractor publicly announces to all U.S. customers (“date of notice”) that a Product is being withdrawn from the U.S. market or that maintenance service or technical support provided by Contractor (“withdrawn support”) is no longer going to be offered, Contractor shall be required to: (i) notify the Commissioner, each Licensee and each Authorized User then under contract for maintenance or technical support in writing of the intended discontinuance; and (ii) continue to offer Product or withdrawn support upon the Contract terms previously offered for the greater of: a) the best terms offered by Contractor to any other customer, or b) not less than twelve (12) months from the date of notice; and (iii) at Authorized User’s option, provided that the Authorized User is under contract for maintenance on the date of notice, either: provide the Authorized User with a Product replacement or migration path with at least equivalent functionality at no additional charge to enable Authorized User to continue use and maintenance of the Product. In the event that the Contractor is not the Product Manufacturer, Contractor shall be required to: (i) provide the notice required under the paragraph above, to the entities described within five (5) business days of Contractor receiving notice from the Product Manufacturer, and (ii) include in such notice the period of time from the date of notice that the Product Manufacturer will continue to provide Product or withdraw support. The provisions of this subdivision (a) shall not apply or eliminate Contractor’s obligations where withdrawn support is being provided by an independent Subcontractor. In the event that such Subcontractor ceases to provide service, Contractor shall be responsible for subcontracting such service, subject to state approval, to an alternate Subcontractor.
Sample 1Sample 2Sample 3See All (256)
AutoNDA by SimpleDocs
CHANGES TO PRODUCT OR SERVICE OFFERINGS a. Product or Service Discontinuance Where Contractor is the Product Manufacturer/Developer, and Contractor publicly announces to all U.S. customers (“date of notice”) that a Product is being withdrawn from the U.S. market or that maintenance service or technical support provided by Contractor (“withdrawn support”) is no longer going to be offered, Contractor shall be required to: (i) notify the Commissioner, each Licensee and each Authorized User then under contract for maintenance or technical support in writing of the intended discontinuance; and (ii) continue to offer Product or withdrawn support upon the Contract terms previously offered for the greater of: a) the best terms offered by Contractor to any other customer, or b) not less than twelve (12) months from the date of notice; and (iii) at Authorized User’s option, provided that the Authorized User is under contract for maintenance on the date of notice, either: provide the Authorized User with a Product replacement or migration path with at least equivalent functionality at no additional charge to enable Authorized User to continue use and maintenance of the Product.
Sample 1Sample 2Sample 3See All (35)
CHANGES TO PRODUCT OR SERVICE OFFERINGS a. Product or Service Discontinuance Where Contractor is the Product manufacturer/developer, and Contractor publicly announces to all U.S. customers (“date of notice”) that a Product is being withdrawn from the U.S. market or that maintenance service or technical support provided by Contractor (“withdrawn support”) is no longer going to be offered, Contractor shall be required to: (i) notify the Commissioner and each Licensee then under contract for maintenance or technical support in writing of the intended discontinuance; and (ii) continue to offer Product or withdrawn support upon the Contract terms previously offered for the greater of: (a) the best terms offered by Contractor to any other similarly situated, supported customer, or (b) not less than 12 months from the date of notice; and (iii) at Licensee’s option, and in order to enable Licensee to continue the use and maintenance of the Product, provide Licensee with a Product replacement or migration path with at least equivalent functionality at no additional charge, provided that Licensee is under contract for maintenance on the date of notice and Contractor is offering such replacement or migration path to all of its similarly situated, supported customers without additional charge. b. Product or Service Re-Bundling In the event that Contractor is the Product manufacturer and publicly announces to all U.S. customers (“date of notice”) that a Product or maintenance or technical support offering is being re-bundled in a different manner from the structure or licensing model of the prior U.S. commercial offering, Contractor shall
Sample 1Sample 2Sample 3See All (32)
CHANGES TO PRODUCT OR SERVICE OFFERINGS a. Product or Service Discontinuance Where Contractor is the Product Manufacturer/Developer, and Contractor publicly announces to all U.S. customers (“date of notice”) that a Product is being withdrawn from the U.S. market or that maintenance service or technical support provided by Contractor (“withdrawn support”) is no longer going to be offered, Contractor shall be required to: (1) notify the Commissioner, each Licensee and each Authorized User then under contract for maintenance or technical support in writing of the intended discontinuance; and
Sample 1Sample 2Sample 3See All (5)
CHANGES TO PRODUCT OR SERVICE OFFERINGS. Any replacement Product that the Contractor may be required to provide at no additional charge shall have similar features, functionality, and pricing as the discontinued Product. In the event of this occurrence, the Authorized User shall cease use of the discontinued Product and exchange the discontinued Product for the replacement Product.
Sample 1
CHANGES TO PRODUCT OR SERVICE OFFERINGS. No Hardstop/Passive License Monitoring; and
Sample 1
CHANGES TO PRODUCT OR SERVICE OFFERINGS. This section is not applicable to Lot 3 – Cloud and Cloud Solutions.
Sample 1
AutoNDA by SimpleDocs
CHANGES TO PRODUCT OR SERVICE OFFERINGS a. Product or Service Discontinuance Where Contractor is the Product Manufacturer/Developer, and Contractor publicly announces to all U.S. customers (“date of notice”) that a Product is being withdrawn from the U.S. market or that maintenance service or technical support provided by Contractor (“withdrawn support”) is no longer going to be offered, Contractor shall be required to: (i) notify the Commissioner, each Licensee and each Authorized User then under contract for maintenance or technical support in writing of the intended discontinuance; and (ii) continue to offer Product or withdrawn support upon the Contract terms previously offered for the greater of: a) the best terms offered by Contractor to any other customer, or b) not less than twelve
Sample 1
CHANGES TO PRODUCT OR SERVICE OFFERINGS 
Sample 1Sample 2Sample 3

Related to CHANGES TO PRODUCT OR SERVICE OFFERINGS

  • Product and Service Offerings The Products and services available under this Contract are set forth herein and specified in Appendices C and D which may be amended during the contract term to incorporate new Product or service offerings, price revisions or deleted items. This Contract is limited to sale, installation and maintenance of Product (see also 4.2 Service Offerings). Leasing is not permitted at this time. The Commissioner reserves the right to amend the Contract at any time to incorporate lease offerings. Offering updates should be submitted under the Contract as soon as possible after they are announced by Contractor in accordance with the terms of Appendix H. GENERAL CONSIDERATIONS A. No drug use of any type, nor consumption of alcoholic beverages by the Contractor or its personnel shall be permitted on the premises. B. The Authorized User will not be liable for any expense incurred by the Contractor as a consequence of any traffic infraction or parking violations attributable to employees of the Contractor. C. It is the Contractor's responsibility to maintain the equipment and materials provided for the work consistent with applicable safety and health codes. D. The Office of General Services' interpretation of specifications shall be final and binding upon the Contractor. E. The Office of General Services will make no allowance or concession to the Contractor for any alleged misunderstanding or deception because of quantity, quality, character, location, or other conditions.

  • COMMERCIAL REUSE OF SERVICES The member or user herein agrees not to replicate, duplicate, copy, trade, sell, resell nor exploit for any commercial reason any part, use of, or access to 's sites.

  • Service Offerings Our Services vary and particular descriptions of such Services can be found at points where you access each respective Service. We genera ly provide the Services to you free of charge, unless otherwise noted at the time the Services are presented to you for acceptance and use. Use of our Services is subject to your agreement with this XXXX and your compliance with same. We make no representation or warranty with respect to the quality, accuracy and/or completeness of the Services. We may suspend, modify, terminate and/or alter the Services at any time and for any reason, in our sole discretion.

  • Unbundled Network Terminating Wire (UNTW) 2.8.3.1 UNTW is unshielded twisted copper wiring that is used to extend circuits from an intra-building network cable terminal or from a building entrance terminal to an individual End User’s point of demarcation. It is the final portion of the Loop that in multi-subscriber configurations represents the point at which the network branches out to serve individual subscribers. 2.8.3.2 This element will be provided in MDUs and/or Multi-Tenants Units (MTUs) where either Party owns wiring all the way to the End User’s premises. Neither Party will provide this element in locations where the property owner provides its own wiring to the End User’s premises, where a third party owns the wiring to the End User’s premises.

  • Web Services Our Web Services are designed to enable you to easily establish a presence on the Internet. Our Web Hosting and Design is composed of our Web Hosting and Design Publishing Component and other miscellaneous components. These components may be used independently or in conjunction with each other.

  • Service Changes PBI may modify its Service by giving written notice to you (a “Service Change Notice”), which will state whether the change is material. After receiving a Service Change Notice, if the change is material, you may terminate Service by giving us a termination notice at the address indicated in Section 21 or you may create a case at xxxxxxxxxxx.xxx/xx/xxxxxxx-xx.xxxx (follow the instructions under “how to create a case”).

  • Included Services If any services, functions, or responsibilities not specifically described in this Agreement are an inherent, necessary, or customary part of the Services or are required for proper performance or provision of the Services in accordance with this Agreement, such services, functions, or responsibilities are deemed to be included within the scope of the Services to be delivered for the Charges, as if such services, functions, or responsibilities were specifically described in this Agreement.

  • Registration Data Directory Services Until ICANN requires a different protocol, Registry Operator will operate a WHOIS service available via port 43 in accordance with XXX 0000, and a web-­‐based Directory Service at <whois.nic.TLD> providing free public query-­‐based access to at least the following elements in the following format. ICANN reserves the right to specify alternative formats and protocols, and upon such specification, the Registry Operator will implement such alternative specification as soon as reasonably practicable. Registry Operator shall implement a new standard supporting access to domain name registration data (SAC 051) no later than one hundred thirty-­‐five (135) days after it is requested by ICANN if: 1) the IETF produces a standard (i.e., it is published, at least, as a Proposed Standard RFC as specified in RFC 2026); and 2) its implementation is commercially reasonable in the context of the overall operation of the registry. 1.1. The format of responses shall follow a semi-­‐free text format outline below, followed by a blank line and a legal disclaimer specifying the rights of Registry Operator, and of the user querying the database. 1.2. Each data object shall be represented as a set of key/value pairs, with lines beginning with keys, followed by a colon and a space as delimiters, followed by the value. 1.3. For fields where more than one value exists, multiple key/value pairs with the same key shall be allowed (for example to list multiple name servers). The first key/value pair after a blank line should be considered the start of a new record, and should be considered as identifying that record, and is used to group data, such as hostnames and IP addresses, or a domain name and registrant information, together. 1.4. The fields specified below set forth the minimum output requirements. Registry Operator may output data fields in addition to those specified below, subject to approval by ICANN, which approval shall not be unreasonably withheld.

  • Support Services Rehabilitation, counselling and EAP’s. Support is strictly non- punitive, and can be accessed at anytime (self-identification of the need for help is strongly encouraged).

  • Supply of Services 7.1 Supplier shall provide the Services to Purchaser in accordance with the Order in all material respects using reasonable care and skill. 7.2 Supplier shall use reasonable endeavours to meet any performance dates for the Services specified in the Order but any dates shall be estimates only and time shall not be of the essence for the performance of the Services. 7.3 Supplier shall have the right to make any changes to the Services which are necessary to comply with any applicable law or safety requirements or which do not materially affect the nature or quality of the Services. 7.4 Purchaser shall: (a) ensure that the terms of Order are complete and (if submitted by Purchaser) the service specification are complete and accurate; (b) co-operate with Supplier in all matters relating to the Services; (c) provide Supplier, its employees, agents, consultants and subcontractors with access to Purchaser’s premises, machinery and other facilities as reasonably required by Supplier to provide the Services; and (d) provide Supplier with such information and materials as Supplier may reasonably require to supply the Services, and ensure that such information is accurate in all material respects. 7.5 If Supplier’s performance of any of its obligations in respect of the Services is prevented or delayed by an any act or omission by Purchaser or failure by Purchaser to performs its obligations (“Purchaser Default”) Supplier shall without limiting its other rights or remedies have the right to suspend performance of the Services until Purchaser remedied Purchaser Default and relieves Supplier from its obligations to the extent the Customer Default prevents or delays Supplier’s performance. Purchaser shall indemnify Supplier against all liabilities costs, losses and expenses which Supplier may incur by reason of Purchaser Default. 7.6 Where the Services consist of any experimental or developmental work, the results supplied or recommendations made under the Services are given in good faith within the limitations of the data available, but no warranty, expressed or implied, is given as to the ability of Supplier to achieve a specific outcome, nor the accuracy of results obtained. 7.7 Any claims by Purchaser which is based on defect in the Services shall be notified to Supplier within twenty-one (21) days of the services being performed and promptly after discovery of defect or failure. The sole and exclusive remedy of Purchaser for such defect hereunder shall be the re-performance or re- fund, at Supplier’s option, of any defective or non-conforming Services.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!