License Restrictions Licensor reserves all rights not expressly granted to You. The Software is licensed for Your internal use only. Except as this Agreement expressly allows, You may not (1) copy (except for back-up purposes), modify, alter, create derivative works, reverse engineer, decompile, or disassemble the Software except and only to the extent expressly permitted by applicable law; (2) transfer, assign, pledge, rent, timeshare, host or lease the Software, or sublicense any of Your license grants or rights under this Agreement; in whole or in part, without prior written permission of Licensor; (3) remove any patent, trademark, copyright, trade secret or other proprietary notices or labels on the Software or its documentation; or (4) disclose the results of any performance, functional or other evaluation or benchmarking of the Software to any third party without the prior written permission of Licensor. Hosting Restrictions. In the event that You desire to have a third party manage, host (either remotely or virtually) or use the Software on Your behalf, You shall (1) first enter into a valid and binding agreement with such third party that contains terms and conditions to protect Licensor’s rights in the Software that are no less prohibitive and/or restrictive than those contained in this Agreement, including, without limitation, the Verification section below; (2) prohibit use by such third party except for the sole benefit of You; and (3) be solely responsible to Licensor for any and all breaches of the above terms and conditions by such third party.
Xxxxx of License; Limitations The Engineer is granted a limited revocable non-exclusive license to use the registered TxDOT trademark logo (TxDOT Flying “T”) on any deliverables prepared under this contract that are the property of the State. The Engineer may not make any use of the registered TxDOT trademark logo on any other materials or documents unless it first submits that request in writing to the State and receives approval for the proposed use. The Engineer agrees that it shall not alter, modify, dilute, or otherwise misuse the registered TxDOT trademark logo or bring it into disrepute.
Xxxxx of License Georgia Institute of Technology shall grant the Student a limited, nonexclusive, nontransferable and revocable license to use and occupy an assigned space in a Georgia Institute of Technology facility in accordance with the terms and conditions of this Contract (the “License”). The parties to this Contract do not intend that an estate, a tenancy or any other interest in property should pass from Georgia Institute of Technology to Student. Instead, it is the intention of the parties that the relationship between Georgia Institute of Technology and Student be that of licensor and licensee and the sole right of Student to use the assigned space as a living unit shall be based upon the License granted in this Contract.
Use Restrictions (a) Company will not do or attempt to do, and Company will not permit any other person or entity to do or attempt to do, any of the following, directly or indirectly:
(i) use any Proprietary Item for any purpose, at any location or in any manner not specifically authorized by this Agreement;
(ii) make or retain any copy of any Proprietary Item except as specifically authorized by this Agreement;
(iii) create, recreate or obtain the source code for any Proprietary Item;
(iv) refer to or otherwise use any Proprietary Item as part of any effort to develop other software, programs, applications, interfaces or functionalities or to compete with BNYM or a Third Party Provider;
(v) modify, adapt, translate or create derivative works based upon any Proprietary Item, or combine or merge any Proprietary Item or part thereof with or into any other product or service not provided for in this Agreement and not authorized in writing by BNYM;
(vi) remove, erase or tamper with any copyright or other proprietary notice printed or stamped on, affixed to, or encoded or recorded in any Proprietary Item, or fail to preserve all copyright and other proprietary notices in any copy of any Proprietary Item made by Company;
(vii) sell, transfer, assign or otherwise convey in any manner any ownership interest or Intellectual Property Right of BNYM, or market, license, sublicense, distribute or otherwise grant, or subcontract or delegate to any other person, including outsourcers, vendors, consultants, joint venturers and partners, any right to access or use any Proprietary Item, whether on Company’s behalf or otherwise;
(viii) subcontract for or delegate the performance of any act or function involved in accessing or using any Proprietary Item, whether on Company’s behalf or otherwise;
(ix) reverse engineer, re-engineer, decrypt, disassemble, decompile, decipher, reconstruct, re-orient or modify the circuit design, algorithms, logic, source code, object code or program code or any other properties, attributes, features or constituent parts of any Proprietary Item;
(x) take any action that would challenge, contest, impair or otherwise adversely effect an ownership interest or Intellectual Property Right of BNYM;
(xi) use any Proprietary Item to provide remote processing, network processing, network communications, a service bureau or time sharing operation, or services similar to any of the foregoing to any person or entity, whether on a fee basis or otherwise;
(xii) allow Harmful Code into any Proprietary Item, as applicable, or into any interface or other software or program provided by it to BNYM, through Company’s systems or personnel or Company’s use of the Licensed Services or Company’s activities in connection with this Agreement.
(b) Company shall, promptly after becoming aware of such, notify BNYM of any facts, circumstances or events regarding its or a Permitted User’s use of the Licensed System that are reasonably likely to constitute or result in a breach of this Section 2.12, and take all reasonable steps requested by BNYM to prevent, control, remediate or remedy any such facts, circumstances or events or any future occurrence of such facts, circumstances or events.
LICENCE RESTRICTIONS You agree that you will:
17.1 not rent, lease, sub-license, loan, provide, or otherwise make available, the Apps or the Services in any form, in whole or in part to any person without prior written consent from us;
17.2 not copy the Apps, User Information or Services, except as part of the normal use of the Apps or where it is necessary for the purpose of back-up or operational security;
17.3 not translate, merge, adapt, vary, alter or modify, the whole or any part of the Apps, User Information or Services nor permit the Apps or the Services or any part of them to be combined with, or become incorporated in, any other programs, except as necessary to use the Apps and the Services on devices as permitted in these terms;
17.4 not disassemble, de-compile, reverse engineer or create derivative works based on the whole or any part of the Apps or the Services nor attempt to do any such things, except to the extent that (by virtue of sections 50B and 296A of the UK Copyright, Designs and Patents Act 1988) such actions cannot be prohibited because they are necessary to decompile the Apps to obtain the information necessary to create an independent program that can be operated with the Apps or with another program (Permitted Objective), and provided that the information obtained by you during such activities:
(a) is not disclosed or communicated without our prior written consent to any third party to whom it is not necessary to disclose or communicate it in order to achieve the Permitted Objective; and
(b) is not used to create any software that is substantially similar in its expression to the Apps;
(c) is kept secure; and
(d) is used only for the Permitted Objective;
17.5 comply with all applicable technology control or export laws and regulations that apply to the technology used or supported by the Apps or any Service;
(a) not overload our servers by contributing or participation in a Denial of Service (DoS) attack.
Use Restriction (a) If a natural disaster, incident or any other emergency situation occurs or is likely to occur, SORACOM may restrict the use of the SORACOM Air Global Service by the Subscriber in order to give priority to communications whose content are necessary for the prevention of or relief from calamities, for the securing of transportation, communications or electric power supply, the maintenance of public order or any other public interest.
(b) If SORACOM detects any significant and/or continuous signal or transmission using a communication procedure or application which occupies the communication band used by SORACOM, SORACOM may control the transmission rate and traffic of such signal or transmission by controlling the communication band allocated to such signal or transmission.
(c) SORACOM may suspend or limit the use of the SORACOM Air Global Service by the Subscriber, if:
(i) the Subscriber delays in performing or fails to perform any payment obligation or any other obligation under the Agreement;
(ii) the Subscriber gives a false information to SORACOM;
(iii) SORACOM deems that the Subscriber violates Section 13.1 below;
(iv) the Subscriber falls under any of the items of Section 3.2;
(v) the credit card account designated by the Subscriber is invalid, unavailable or cannot be used or recognized; or
License Types (a) A Team License shall mean a subscription license that provides a limited number of licenses to a set amount of developers for a named Customer. Customer must procure enough active licenses for each individual who has Programmatic Access. A Team License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer. A Team License cannot be used as a floating license.
(b) A Project License shall mean a subscription license which covers one named Customer application. The license fees are based on the total number of developers working on a named project, regardless of whether such developers are directly using the Licensed Product. For the purposes of pricing and license administration, a “Project Group” is deemed to be a distinct Customer software team within a Customer’s business unit that works towards a distinct business purpose for the benefit of a single application. Customer is required to identify the name of each such Project Group to Syncfusion; such name must be unambiguous in nature. It is acknowledged and agreed by Customer that each identified Project Group shall exist for a valid business purpose and not just as a means for consolidating software licenses to minimize license fees that are otherwise due. If, in the sole opinion of Syncfusion, multiple Customer teams would each individually meet the above definition of a Project Group, such multiple teams shall not be combined for the purpose of consolidating licenses under a single Project Group. Customer is responsible for providing information about each such Project Group to Syncfusion. By entering into this Agreement, Customer represents that after the effective date, it will not withhold information that Syncfusion requires to properly license each such Project Group, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement.
(c) A Division License shall mean a subscription license which will cover one named Division and allow for development work on more than one project within such Division. A Division shall mean a business unit within Customer’s organization that works towards a distinct business purpose. Customer is required to identify the name of such Division to Syncfusion; such name must be unambiguous in nature. License fee determinations will be at the sole discretion of Syncfusion and be based on such factors including, but not limited to, Customer’s Division size, developer count, and the scope of the Division’s business purpose. By entering into this Agreement, Customer acknowledges that it is responsible for providing information about the named Customer Division to Syncfusion sufficient for Syncfusion to price the Division License, and Customer represents that it will not withhold information that Syncfusion requires to properly license each such named Customer division, and further agrees that any misrepresentation in this regard constitutes a material breach of this Agreement.
(d) A Global License shall mean a subscription license for all development for a named Customer, where the license fees are based on the overall size of a named Customer. A Global License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.
(e) A Retail License shall mean a single named user, non-transferable license to use the Licensed Product. Retail Licenses will only made available to Customers in Syncfusion’s sole discretion and only when the number of such End-Users is finite and readily ascertainable. Accordingly, Syncfusion will make a determination as to whether or not the provision of Retail Licenses is appropriate under the circumstances applicable to any given Customer, and Syncfusion reserves the right, in its sole discretion, to refuse to make available Retail Licenses to a Customer and instead require a given Customer to procure a Project License, Division License, or Global License as circumstances dictate. A Retail License only grants rights to a named Customer and does not extend any right, in any form, to any parent or subsidiary company of Customer.
GRANT OF LICENSE AND LIMITATIONS License to Use the Licensed Software. In accordance with the terms and conditions hereof, the Licensor agrees to grant to Bianfeng Networking a license to install and operate the Licensed Software on the Designated Computers and to grant to its customers the right to use such software system.
Content Restrictions You agree not to use any Product or Service to store, display, or transmit content that is deceptive, libelous, defamatory, obscene, racist, hateful, infringing or illegal, and to the extent Authorized Users exercise the rights granted to you under this Agreement, you represent and agree that you will ensure that such Authorized Users will also comply with the obligations applicable to such exercise set forth in this Agreement. We take no responsibility and assume no liability for any Customer Property that you, an Authorized User, or third party out of our control posts, submits, displays, or otherwise makes available via the Products or Services, and you agree that we are acting only as a passive conduit for the online distribution and publications of such Customer Property.
Usage Restrictions Customer will not (a) make any Service or Content available to anyone other than Customer or Users, or use any Service or Content for the benefit of anyone other than Customer or its Affiliates, unless expressly stated otherwise in an Order Form or the Documentation, (b) sell, resell, license, sublicense, distribute, make available, rent or lease any Service or Content, or include any Service or Content in a service bureau or outsourcing offering, (c) use a Service or Non-Xxxxxx Application to store or transmit infringing, libelous, or otherwise unlawful or tortious material, or to store or transmit material in violation of third-party privacy rights, (d) use a Service or Non-Xxxxxx Application to store or transmit Malicious Code, (e) interfere with or disrupt the integrity or performance of any Service or third-party data contained therein, (f) attempt to gain unauthorized access to any Service or Content or its related systems or networks, (g) permit direct or indirect access to or use of any Services or Content in a way that circumvents a contractual usage limit, or use any Services to access or use any of Xxxxxx intellectual property except as permitted under this Agreement, an Order Form, or the Documentation, (h) modify, copy, or create derivative works based on a Service or any part, feature, function or user interface thereof, (i) copy Content except as permitted herein or in an Order Form or the Documentation, (j) frame or mirror any part of any Service or Content, other than framing on Customer's own intranets or otherwise for its own internal business purposes or as permitted in the Documentation, (k) except to the extent permitted by applicable law, disassemble, reverse engineer, or decompile a Service or Content or access it to (1) build a competitive product or service, (2) build a product or service using similar ideas, features, functions or graphics of the Service, (3) copy any ideas, features, functions or graphics of the Service, or (4) determine whether the Services are within the scope of any patent.
