AMENDED AND RESTATED WAFER SUPPLY AGREEMENT

CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS BOTH (I) NOT MATERIAL AND (II) IS THE TYPE THAT POWER INTEGRATIONS INC. TREATS AS PRIVATE OR CONFIDENTIAL.

AMENDED AND RESTATED WAFER SUPPLY AGREEMENT

The parties to this Agreement,

(1)	Power Integrations, Inc., a Delaware corporation having its principal place of business at 0000 Xxxxxxx Xxx.; Xxx Xxxx, XX 00000 (“POWER INTEGRATIONS”);

and

(2)	OKI ELECTRIC INDUSTRY CO., LTD., a Japanese corporation having its registered head office at 0-00, Xxxxxxxxx 0-xxxxx, Xxxxxx-xx, Xxxxx 000-0000, Xxxxx (“OKI ELECTRIC”),

entered into the Wafer Supply Agreement (“WSA”) on the 1st day of October, 1998. The above parties desire to amend and restate the WSA in this Amended and Restated Wafer Supply Agreement (“Agreement”), which is made and entered into by and between the above parties as of this 1^st day of April 2003 (the “Effective Date”), as follows.

WITNESSETH:

WHEREAS, OKI is engaged in providing wafer foundry services for IC companies; and

WHEREAS, XX is engaged in the design, development, marketing and sale of various IC products for use in power source applications; and

WHEREAS, PI desires to acquire from OKI fabrication and supply of wafers of certain IC products, and OKI is willing to supply such wafers to PI within the limitation of available production capacity of OKI.

NOW, THEREFORE, in consideration of the above premises and the mutual covenants of the parties contained herein, PI and OKI hereby agree as follows:

Article 1.(Definitions)

When used throughout this Agreement, each of the following terms shall have the meaning indicated below:

1.1	PRODUCTS: Any and all IC products of PI which will be processed in accordance with the PI PROCESS.


	1	Confidential

1.2	WAFERS: Non-probed four (4) and/or five (5) inch silicon wafers produced during the PILOT PRODUCTION and VOLUME PRODUCTION which meet the COMMON SPECIFICATIONS.

1.3	PILOT PRODUCTION: The production by OKI of WAFERS for the purpose of evaluation by XX.

1.4	VOLUME PRODUCTION: The production by OKI of WAFERS for the volume production of PRODUCTS.

1.5	PI PROCESS: PI’s process technologies, which are implemented in the OKI wafer fabrication facility to produce the WAFERS, and of which the detailed specification is specified in the COMMON SPECIFICATIONS plus any improvements made by PI or jointly by PI and OKI during the Term of the Agreement.

1.6	OKI PROCESS: OKI’s process technologies developed exclusively by OKI and implemented in the OKI wafer fabrication facility to produce the WAFERS.

1.7	COMMON SPECIFICATION(S): The specifications for the production, delivery and acceptance of the WAFERS which are defined in EXHIBIT C attached hereto.

1.8	INDIVIDUAL SALES CONTRACTS: Individual contracts of sale and purchase of the WAFERS that will be concluded between OKI and PI pursuant to this Agreement.

1.9	LWS AGREEMENT: The Licensing and Wafer Supply Agreement, dated June 18, 1993, between OKI and PI, including all amendments.

1.10

SUBSIDIARY: Any corporation, company or other entity in which OKI or PI, as the case may be, owns and/or controls, directly or indirectly, now or hereafter, more than fifty percent (50%) of the outstanding shares of stock entitled to vote for the election of directors or their equivalents regardless of the form thereof (other than any shares of stock whose voting rights are subject to restriction); provided, however, that any entity which would be a SUBSIDIARY by reason of the foregoing shall be considered a SUBSIDIARY only so long as such ownership or control exists.

1.11	OKI: OKI and any of its SUBSIDIARIES.

1.12	PI: PI and any of its SUBSIDIARIES.

1.13	CONFIDENTIAL INFORMATION: Technical information, or other non-public information relating to PI or OKI, whether in a man-readable or machine-readable form and whether recorded on paper, tape, diskette or any other media, which is disclosed by the


	2	Confidential

disclosing party to the receiving party, and (i) which is designated in writing, by appropriate legend, as confidential or, (ii) if disclosed orally is identified as confidential information at the time of disclosure and a summary of which is confirmed in writing within thirty (30) days after oral disclosure and designated, by appropriate legend, as confidential. Notwithstanding the foregoing, all information generated by the activities and actions of OKI under this Agreement on PI’s behalf or any information including all PI INTELLECTUAL PROPERTY received from PI by OKI to effect the terms of this Agreement shall also be considered PI’s CONFIDENTIAL INFORMATION unless explicitly agreed to be exempted by XX in writing.

1.14	OKI IMPROVEMENTS: Any modification or improvement to the OKI PROCESS or the PI PROCESS, developed exclusively by OKI, during the Term of the Agreement and all OKI improvements under the LWS Agreement.

1.15	JOINT IMPROVEMENTS: Any and all enhancements, modifications, derivative works, improvements and/or changes made by OKI in conjunction with PI to the PI PROCESS, the COMMON SPECIFICATION, the MASK TOOLING SETS, and/or the PI CONFIDENTIAL INFORMATION.

1.16	MASK TOOLING SETS: Those MASK TOOLING SETS delivered by PI to OKI or the mask databases provided to OKI for the purpose of building the MASK TOOLING SETS pursuant to this Agreement.

1.17	PI INTELLECTUAL PROPERTY: The PI PROCESS, the COMMON SPECIFICATIONS, the MASK TOOLING SETS, the JOINT IMPROVEMENTS, and all INTELLECTUAL PROPERTY RIGHTS in the foregoing.

1.18	INTELLECTUAL PROPERTY RIGHTS: Copyrights, patents, trade secrets, moral rights, know-how and other intellectual or proprietary rights of any kind.

1.19	DC WAFER(S): Non-probed five (5) inch Wafers that are processed in accordance with the DC WAFER COMMON SPECIFICATIONS.

1.20	CONSIGNED EQUIPMENT: The equipment defined in Article 16.

1.21	IMPLANTER: The equipment defined in Article 17.

1.22	SC WAFER(S): Non-probed four (4) inch WAFERS that are processed in accordance with the SC WAFER COMMON SPECIFICATION.


	3	Confidential

1.23	WAFER TYPE: The different types of WAFERS as defined by the COMMON SPECIFICATION.

Article 2.(Foundry Commitment and Forecasts)

2.1	Both OKI and XX desire to enter into a relationship under which they will act in good faith and cooperate to achieve their objectives to their mutual benefit as set forth in this Agreement.

2.2

OKI agrees to commit to PI the foundry capacity (“FOUNDRY CAPACITY”) as set forth in EXHIBIT A. Each January, during the Term of this Agreement OKI and PI will jointly review PI’s non-binding twelve (12) month forecast of WAFER orders by WAFER TYPE (“PI ANNUAL FORECAST”) and OKI’s FOUNDRY CAPACITY for the upcoming OKI fiscal year (April 1through March 31). Annually, on April 1st during the Term of this Agreement, OKI will commit a FOUNDRY CAPACITY for the current OKI fiscal year, at the OKI plant specified per Section 3.3, in an amount no less than [***] Percent ([***]%) of PI’s total WAFER purchases by WAFER TYPE during the previous OKI fiscal year and PI will submit the PI ANNUAL FORECAST. During the OKI fiscal year, OKI shall accept up to a [***] ([***]%) upside request over the current FOUNDRY CAPACITY, by WAFER TYPE, upon a [***] ([***]) month written advance notice from PI. OKI can request PI to negotiate to reduce the committed FOUNDRY CAPACITY, by WAFER TYPE, for the then current OKI fiscal year, if OKI and PI determine that PI will not order at least [***]% of the PI ANNUAL FORECAST by WAFER TYPE. Any negotiated reduction in FOUNDRY CAPACITY must be agreed to by PI in writing.

2.3

During the Term of this Agreement, PI shall provide OKI on or before a mutually agreed day of each calendar month a written forecast (“PI MONTHLY FORECAST”) of the quantity of the WAFERS of each PRODUCT to be manufactured and delivered (if any) within the period of the following [***] ([***]) calendar months which shall fall within the Term of this Agreement, provided that such forecast shall be in conformity with the FOUNDRY CAPACITY.

2.4	PI must order at least the quantity of WAFERS by WAFER TYPE forecasted in the first [*] ([]) months of the PI MONTHLY FORECAST unless OKI agrees to any change. PI may revise the quantity for each of the last [] ([*]) months of each PI MONTHLY


	4	Confidential

FORECAST without penalty or charge.

2.5

In the event of any direct or indirect governmental intervention in Japan or the United States or in any country of destination of the WAFERS purchased by PI, which intervention may virtually or legally render infeasible supply of the full quantity of the WAFERS ordered by PI, then OKI shall be obligated to supply only such quantity as may feasibly and legally be supplied without any liability to PI and PI will have the right to terminate this Agreement without liability, effective upon written notice to OKI.

2.6	At the request of OKI, PI and OKI shall discuss allocating the production of the WAFERS from one plant of OKI to another.

Article 3.(Sale and Purchase of WAFERS; MASK TOOLING SETS)

3.1	As implementation of the foundry services provided in the preceding Article, PI shall purchase from OKI, and OKI shall sell to PI, those WAFERS ordered pursuant to the terms and conditions of this Agreement, which shall be non-probed WAFERS.

3.2

Subject to the provisions of Section 3.1 above and 5.2 below, PI shall submit to OKI a purchase order (the “PO”) for the WAFERS which shall be substantially in line with the provisions of Section 2.4 above. All PO’s shall be subject to acceptance by OKI through issuance of a written confirmation within five (5) business days of receipt of the PO. Upon such written confirmation only, the PO terms of total quantity, delivery time and pricing shall constitute an INDIVIDUAL SALES CONTRACT which will be deemed to incorporate all of the terms and conditions of this Agreement. The confirmed PO shall be irrevocable except as set forth in Sections 2.4 and 2.5 above. The mix of PRODUCTS and the quantity of WAFERS, by WAFER TYPE, allocated per each of the PRODUCTS in any INDIVIDUAL SALES CONTRACT can be modified at any time, prior to the week the WAFERS will be started, by PI with confirmation from OKI so long as the total quantity of all WAFERS, by WAFER TYPE, is not less.

3.3	The WAFERS sold hereunder shall be SC WAFERS processed at OKI’s [*] plant and DC WAFERS processed at OKI’s [*] plant, or other plants of OKI as mutually agreed in writing by XXX and PI.

3.4	The sale and purchase of the WAFERS may be made between PI and OKI or any of their respective SUBSIDIARIES pursuant to the terms and conditions of this Agreement.


	5	Confidential

3.5

The mask tooling sets for WAFERS of any PRODUCT shall be supplied by PI to OKI one (1) week before its commencement of the WAFERS fabrication at no cost to OKI. If, upon OKI’s examination, the MASK TOOLING SETS are found to be defective or not in conformance with the COMMON SPECIFICATIONS, OKI shall immediately notify PI in detail as to such defects or non-conformity, and PI shall either provide corrected MASK TOOLING SETS at PI’s expense or, notwithstanding any other provision of this Agreement, PI can cancel the INDIVIDUAL SALES CONTRACT for the affected WAFERS, without any liability except for affected WAFER work in progress (“WIP”) and inventory, upon written notice to OKI.

Article 4.(INTELLECTUAL PROPERTY RIGHTS)

4.1

PI is and shall remain the sole and exclusive owner of all right, title and interest in the PI INTELLECTUAL PROPERTY. Subject to all of the terms and conditions of this Agreement, PI grants OKI a limited, non-exclusive license in the PI INTELLECTUAL PROPERTY for the sole purpose of using it internally to manufacture WAFERS for PI in accordance with the terms and conditions of this Agreement. OKI may not use the PI INTELLECTUAL PROPERTY for any other purpose or license it to any third party, unless a separate written agreement for any such rights is executed by XX.

4.2

OKI hereby does and will irrevocably and unconditionally transfer and assign to PI all of OKI’s right, title and interest worldwide in the JOINT IMPROVEMENTS. XXX will promptly disclose in writing all JOINT IMPROVEMENTS to PI promptly upon their creation. OKI shall take all reasonable actions, at PI’s expense, to assist PI in perfecting and enforcing its rights in the JOINT IMPROVEMENTS. Such actions shall include but not be limited to execution of assignments, patent applications and other documents. Subject to all of the terms and conditions of this Agreement, PI hereby grants to OKI a non-exclusive, irrevocable, perpetual, royalty-free, non-transferable, worldwide, right and license, under all INTELLECTUAL PROPERTY RIGHTS to use, modify and reproduce, (with the right to sub-license only an OKI SUBSIDIARY) the JOINT IMPROVEMENTS for OKI’s internal use only except that no license is granted for the purpose of OKI providing foundry service or other benefit to a third party.


	6	Confidential

4.3

In the event that any portion of Section 4.2 is declared invalid or illegal according to any applicable law, (a) OKI hereby waives and agrees never to assert such rights, including any moral rights or similar rights, against PI or PI’s licensees and (b) the parties hereby modify such portion, effective upon such declaration, in such manner as shall secure for PI an exclusive, irrevocable, perpetual, worldwide, fully paid and royalty-free license under all INTELLECTUAL PROPERTY RIGHTS, with rights to sublicense through one or more level(s) of sublicensee(s), to use, modify, reproduce, create derivative works of, distribute, publicly perform and publicly display by all means now known or later developed, such rights in the JOINT IMPROVEMENTS to the maximum extent permitted by applicable law.

4.4

OKI shall be the sole and exclusive owner of all right, title and interest in the OKI IMPROVEMENTS. XXX will promptly disclose in writing all OKI IMPROVEMENTS to PI promptly upon their creation. OKI hereby grants to PI a non-exclusive, irrevocable, perpetual, royalty free, non-transferable, worldwide, right and license, under all INTELLECTUAL PROPERTY RIGHTS to use, modify, reproduce, distribute and otherwise exploit in any manner the OKI IMPROVEMENTS as part of the PI PROCESS and any modifications thereto. Without any consent of OKI, PI may sublicense the OKI IMPROVEMENTS to PI’s SUBSIDIARY so long as the sublicense provides for the protection of OKI’s CONFIDENTIAL INFORMATION on terms not less protective of OKI’s rights than those set forth the in this Agreement.

4.5	OKI agrees not to use the PI INTELLECTUAL PROPERTY or any license under this Agreement in whole or in part or knowledge gained by OKI through producing WAFERS for PI to develop an equivalent or competing process or other product or service that would compete with PI.

Article 5.(Pilot Production and Minimum Order Quantity)

5.1	PILOT PRODUCTION

5.1.1For the PILOT PRODUCTION, PI shall, if PI’s desires to, place an order with OKI for a minimum of [***] ([***]) WAFER starts ([***] ([***]) pilot lot) or multiples thereof per each PRODUCT.

5.1.2The output will be shipped to PI if the WAFERS output is at least [***] percent ([***]%) of the ordered quantity. If the WAFERS output is less than [***] percent


	7	Confidential

([***]%) of ordered quantity, OKI will inform PI of the output quantity of the WAFERS and if PI requires to have the shortage covered, OKI will re-input the WAFERS to cover the shortage of quantity at no additional cost to PI.

5.2VOLUME PRODUCTION

5.2.1For the VOLUME PRODUCTION, PI shall place an order with OKI for a minimum of [***] ([***]) WAFER starts ([***] ([***]) lot) or multiples thereof per each PRODUCT and OKI will ship monthly orders in quantities not less than [***] percent ([***]%) of the quantities ordered of each PRODUCT.

5.2.2The orders of PI for the VOLUME PRODUCTION shall be subject to the provisions of Section 3.2 above.

Article 6.(Delivery)

6.1	The terms of delivery of the WAFERS shall be FCA Miyazaki airport (as such terms are defined in Incoterms 2000).

6.2	The title and risk of loss relating to the WAFERS delivered by OKI to PI shall transfer from OKI to PI at such time and point as provided in Incoterms 1990 relating to such FCA terms. PI shall have the right to designate a freight forwarder, subject to OKI’s reasonable approval.

6.3

OKI will deliver the WAFERS within the number of calendar days specified in the INDIVIDUAL SALES CONTRACT. In the event that OKI foresees a delay in the delivery schedule of the WAFERS, OKI shall make a best effort to correct any delay and OKI shall promptly notify PI of such delay and submit to PI the new delivery schedule. PI will have the right to cancel, without liability, the INDIVIDUAL SALES CONTRACT for the delayed WAFERS if the delay is greater than thirty (30) days.

6.4	OKI shall pack the WAFERS in accordance with the packing standards defined in the COMMON SPECIFICATIONS.

6.5	OKI shall collect PCM data (“PCM DATA”), as defined in the COMMON SPECIFICATIONS, on the manufactured WAFERS. OKI will send the PCM DATA electronically to PI before the WAFERS are received by XX. The PCM DATA will be accurate and complete for all WAFERS and sent in a mutually agreed upon format.

6.6	Notwithstanding any other provision of this Agreement, in the case that PI determines, in consultation with OKI, that the WAFERS currently being manufactured will not meet the


	8	Confidential

PRODUCTS requirements, PI can cancel the INDIVIDUAL SALES CONTRACT for the affected WAFERS without any liability except for the affected WAFER WIP and inventory, upon written notice to OKI.

Article 7.(Test and Inspection)

7.1

PI shall conduct incoming inspection of the WAFERS, by WAFER TYPE, to determine the WAFERS’ conformance to the COMMON SPECIFICATIONS. The PCM DATA specified in Section 6.5 is required for the incoming inspection of the WAFERS and the omission, inaccuracy or other defect in the PCM DATA will in itself be sufficient cause to reject the WAFERS. This inspection shall be regarded as final in terms of quality, quantity and other conditions of the WAFERS supplied to PI subject to OKI’s warranty as defined in Section 11.1. All WAFERS passing the incoming inspection will be accepted by PI.

7.2

PI shall notify OKI which of the WAFERS have been accepted by PI within [***] ([***]) business days after receipt of the WAFERS by XX. Should PI fail to notify OKI within the said [***] ([***]) business days, the WAFERS shall be deemed to have been accepted by PI. PI will owe OKI payment only for the quantity of WAFERS that have been accepted by PI.

7.3	OKI shall not be held responsible for the defects and failures of the WAFERS which are attributable to the design, test and assembly by PI of the PRODUCTS.

7.4	OKI shall not be held responsible for the defects, failures and yield problems of the WAFERS if the WAFERS meet the specifications set forth in the COMMON SPECIFICATIONS.

Article 8.(Process and Specification Changes)

8.1.

OKI shall notify PI in writing as soon as possible, in advance and in accordance with the COMMON SPECIFICATIONS, of process changes which require PI’s change in data-base or which would affect the quality, reliability, form, fit or function of the PRODUCTS in order to receive PI’s prior written approval of the process change. PI will have the right to cancel, without liability, any INDIVIDUAL SALES CONTRACT affected by the process change.

8.2.	PI shall have sole responsibility for the control, maintenance, distribution and modification


	9	Confidential

of the COMMON SPECIFICATIONS including but not limited to the addition and maintenance of applicable process, inspection, quality and procurement specifications. PI will notify OKI of any changes to the COMMON SPECIFICATIONS by amending Exhibit C and attaching the relevant specification or documentation. OKI will acknowledge acceptance of the COMMON SPECIFICATIONS in writing and OKI’s acceptance of the COMMON SPECIFICATIONS will not be unreasonably withheld. In the case of any issue with the COMMON SPECIFICATIONS, OKI agrees that PI is the ultimate authority on the COMMON SPECIFICATIONS.

8.3

PI and OKI shall specify in advance in writing the scope and purpose of any JOINT IMPROVEMENT project for the purpose of pre-defining to what extent and specifically which process technology will be considered a JOINT IMPROVEMENT. OKI’s rights under Section 4.2 shall not extend to any process technology not so defined as a Joint Improvement.

Article 9.(Price and Charge)

9.1

The prices of the WAFERS, which are produced both in the PILOT PRODUCTION and the VOLUME PRODUCTION are set forth in EXHIBIT B attached hereto. Any modifications thereto must be agreed upon by XXX and XX in writing, either as an amendment to EXHIBIT B or as part of an INDIVIDUAL SALES CONTRACT. OKI and PI may jointly review and revise the WAFERS price, by WAFER TYPE, within [***] ([***]) days of the close of each half of OKI’s fiscal year or upon a material change to the COMMON SPECIFICATION.

9.2

In the event of any direct or indirect intervention of the Japanese, the United States and/or any other relevant Governments, including the legislative, administrative and judicial branches thereof, which may virtually or legally disallow a price at which the WAFERS shall be supplied under this Agreement, then OKI shall not be obligated to abide by such price without any liability to PI and PI will have the right to terminate this Agreement without liability, effective upon written notice to OKI.


	10	Confidential

Article 10.(Payments)

10.1	Payment for the WAFERS shall be by telephonic transfer [*] ([*]) days after receipt of invoice and secured by a standby letter of credit to be opened at a first class bank acceptable to OKI. XXX agrees to negotiate terms or alternate forms of payment as proposed by XX.

10.2	For tooling costs, PI will pay OKI [*] ([]), payment of which shall be made within [] ([*]) days from the beginning of VOLUME PRODUCTION of DC WAFERS from the IMPLANTER.

Article 11.(Xxxxxxxx, Indemnification and Improvements)

11.1

OKI warrants that the WAFERS sold to PI under this Agreement will conform to their COMMON SPECIFICATIONS. PI shall notify OKI in writing of any such non-conformity or defect of said WAFERS within [***] ([***]) months after the acceptance of the WAFERS by PI per Section 7.2 above. OKI’s sole obligations under this warranty are limited to, at PI’s option, (i) replacing or reworking any said WAFERS which shall be returned to OKI’s manufacturing facility with transportation charges prepaid, or (ii) OKI crediting an amount equal to the purchase price of said WAFERS.

11.2

OKI shall defend, indemnify and hold harmless PI, its officers, directors, employees and representatives from and against any claim, demand, cause of action, debt, or liability, including reasonable attorneys’ fees, relating to or arising from allegations that the OKI PROCESS, OKI IMPROVEMENTS and any OKI contributions to the JOINT IMPROVEMENTS used to produce WAFERS or the resulting WAFERS under this Agreement or under the LWS Agreement or under the WSA infringes any patent, copyright, trade secret or other right of any kind of a third party; provided that XXX is promptly notified in writing of the action and is allowed to assume and control the defense. OKI shall pay all damages and costs awarded therein, but shall not be responsible for any compromise or settlement made without OKI’s consent.

11.3	EXCEPT AS EXPRESSLY STATED HEREIN, NO EXPRESS OR IMPLIED WARRANTIES ARE MADE BY OKI RELATING TO THE WAFERS, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR


	11	Confidential

A PARTICULAR PURPOSE. XX MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND WITH REGARD TO ANY OF THE PI INTELLECTUAL PROPERTY.

11.4

PI shall defend, indemnify and hold harmless OKI, its officers, directors, employees and representatives from and against any claim, demand, cause of action, debt, or liability, including reasonable attorneys’ fees, relating to or arising from allegations that the PI PROCESS and any PI contributions to the JOINT IMPROVEMENTS used to produce WAFERS infringes any patent, copyright, trade secret or other right of any kind of a third party; provided that PI is promptly notified in writing of the action and is allowed to assume and control the defense. PI shall pay all damages and costs awarded therein, but shall not be responsible for any compromise or settlement made without PI’s consent.

11.5

OKI shall keep records for [***] ([***]) years, notwithstanding the termination of this Agreement, of the WAFERS manufactured and summaries of their process monitors. XXX agrees to permit such records to be examined and copied by XX, or XX’s authorized representative, upon reasonable prior written notice to OKI during normal business hours at OKI’s offices. Such records shall be deemed PI’s CONFIDENTIAL INFORMATION.

Article 12.(Confidentiality)

12.1	The receiving party shall use any CONFIDENTIAL INFORMATION acquired from the disclosing party in connection with this Agreement solely for the purposes of this Agreement.

12.2

For a period of [***] ([***]) years after the receipt or creation of the CONFIDENTIAL INFORMATION, or during the Term of this Agreement, which may be longer, the receiving party shall use a reasonable standard of care not to publish or disseminate the CONFIDENTIAL INFORMATION to any third party, except as otherwise provided herein. The receiving party shall have no obligation with respect to any CONFIDENTIAL INFORMATION received by it which the receiving party shall prove is:

12.2.1Published or otherwise available to the public other than by a breach of this Agreement or any other agreement by the receiving party

12.2.2Rightfully received by the receiving party hereunder from a third party not obligated under this Agreement or any other agreement, and without confidential limitation;


	12	Confidential

12.2.3

Known to the receiving party prior to its first receipt of the same from the disclosing party;

12.2.4

Independently developed by the receiving party; or

12.2.5

Furnished to a third party by the disclosing party without a similar restriction on the third party’s right of disclosure.

In the case that Recipient intends to disclose publicly or to a third party any CONFIDENTIAL INFORMATION under the previously defined exceptions above, the Recipient must first give the disclosing party written notice ([***]) [***] days prior to such a disclosure. CONFIDENTIAL INFORMATION approved in writing by the disclosing party for release by the receiving party without a confidentiality agreement designating the information as confidential will remove the receiving party’s obligations to the CONFIDENTIAL INFORMATION.

12.3

If any CONFIDENTIAL INFORMATION is disclosed pursuant to the requirement or request of a governmental or judicial agency or disclosure is required by operation of law, such disclosure will not constitute a breach of this Agreement, provided that the receiving party shall promptly notify the disclosing party and seek a protective order with respect thereto reasonably satisfactory to the disclosing party to the extent available under applicable law.

12.4

The receiving party shall limit access to the CONFIDENTIAL INFORMATION only to such officers and employees of the receiving party who are reasonably necessary to implement this Agreement and only to such extent as may be necessary for such officers and employees to perform their duties. The receiving party shall be liable to cause all of such officers and employees to sign a secrecy agreement to abide by the secrecy obligations provided in this Agreement. The receiving party shall maintain records of such officers and employees.

12.5

Confidential Information and all materials including, without limitation, documents, drawings, masks, specifications, models, apparatus, sketches, designs and lists furnished to the receiving party by and which are themselves identified to be or designated in writing to be the property of the disclosing party are and shall remain the property of the disclosing party and shall be returned to the disclosing party promptly at its request, including any copies.


	13	Confidential

12.6

Any CONFIDENTIAL INFORMATION disclosed by the disclosing party at any time under the LWS AGREEMENT shall be deemed for the purpose of this Article to be or have been disclosed pursuant to this Agreement as CONFIDENTIAL INFORMATION. PI may disclose information with respect to any OKI IMPROVEMENTS to the PI PROCESS to one or more third parties as PI Confidential Information and covered by a non-disclosure agreement with protection equivalent to this Agreement for the sole purpose of having such third parties provide PI with design, layout, foundry, assembly and testing services.

12.7

The COMMON SPECIFICATIONS will be CONFIDENTIAL INFORMATION for a period of [***] ([***]) years after the Term of this Agreement and OKI agrees to use its best efforts to never make public the COMMON SPECIFICATIONS. Notwithstanding any other provision of this Agreement, OKI shall treat the COMMON SPECIFICATIONS in accordance with the confidentiality obligations and use restrictions of this Agreement during that [***] ([***]) year period.

12.8	PI may request the confidential release of XXX’s CONFIDENTIAL INFORMATION to a customer of the PRODUCTS for purposes of such customer’s evaluation or audit. OKI shall not unreasonably withhold approval of the release.

Article 13.(Term and Termination)

13.1	This Agreement shall continue in full force and effect from the Effective Date, until [***], unless earlier terminated as provided herein (“Term”).

13.2

Notwithstanding anything to the contrary in Section 18.11 (“Force Majeure”), If any Japanese governmental agency, entity or authority requires (including through administrative guidance) any changes to this Agreement, PI may terminate this Agreement immediately if the changes are, in PI’s sole discretion, detrimental to PI’s interests or otherwise not reasonably acceptable to PI, without liability of any kind.

13.3

In the event that either party has committed a material breach of this Agreement, the other party shall have the right to terminate this Agreement by giving sixty (60) days’ written notice of termination specifying any alleged material breach or breaches, such termination to become effective at the end of said period unless during said period all material breaches specified have been remedied or waived.


	14	Confidential

13.4	Either party shall also have the right to terminate this Agreement with immediate effect by giving written notice of termination to the other party at any time upon or after the occurrence of any of the following events with respect to such other party:

13.4.1Insolvency, bankruptcy, reorganization or liquidation or filing of any application therefor, or other commitment of an affirmative act of insolvency, which is not promptly removed or stayed;

13.4.2Attachment, execution or seizure of substantially all of the assets or filing of any application therefor which is not promptly released or stayed;

13.4.3Assignment or transfer of that portion of the business to which this Agreement pertains to a trustee for the benefit of creditors;

13.4.4Termination of its business or dissolution.

13.5

[***]

13.6	No failure or delay on the part of either party in exercising its right of termination hereunder for any one or more causes shall be construed to prejudice its rights of termination for such cause or any other or subsequent cause.

13.7

In the event of expiration or termination of this Agreement, within sixty (60) days after expiration or termination of this Agreement, the receiving party shall return to the disclosing party all media and documentation containing the CONFIDENTIAL INFORMATION and render unusable all said CONFIDENTIAL INFORMATION placed in any storage apparatus under the receiving party’s control in accordance with the instruction of the disclosing party.

13.8

The termination or expiration of this Agreement shall not release either party from any liability which at said date of termination or expiration has already accrued to the other party. OKI waives any right to damages for termination or expiration of this Agreement in accordance with its terms except for affected WIP and WAFER inventory.

13.9	In the event that this Agreement is terminated by PI pursuant to Section 13.3 or Section 13.4, OKI will compensate PI for PI’s unrealized WAFER price benefit due to such termination.

13.10

This Agreement amends and restates the WSA and shall not serve to terminate or cause the expiration of the WSA or any rights or obligations that accrued under it on or before the Effective Date of this Agreement.


	15	Confidential

13.11

Notwithstanding any termination or expiration of this Agreement, the provisions of Articles 1, 11, and 12, Sections 13.7, 13.8, 13.9, 13.10, this Section 13.11, and Articles 14, 15, and 18 shall survive this Agreement.

Article 14. (Government Regulations)

14.1

Unless prior approval is obtained from the competent governmental agency, each party shall not knowingly export or re-export, directly or indirectly, any WAFERS to any country or countries to which export or re-export will violate any laws or regulations of either the United States of America or Japan.

14.2	OKI shall obtain, at OKI’s expense, any and all governmental licenses, permits and approvals and make any necessary filings, registrations and notifications in Japan which are required in connection with this Agreement and shall provide PI with translated copies of any such documents.

Article 15.(Non-Disclosure)

15.1	PI and OKI shall keep the terms and existence of this Agreement confidential and shall not make disclosure thereof to any third party except:

15.1.1with the prior written consent of the other party, such consent will not be unreasonably withheld,

15.1.2as required by any governmental body having jurisdiction,

15.1.3as otherwise required by law or regulations of a stock exchange at which the shares of OKI or PI are listed, or

15.1.4to legal counsel or accountants of the parties.

15.2	Neither of the parties shall unilaterally make any announcement of the formation and existence of this Agreement without prior written consent of the other party.

Article 16.(Consignment of Manufacturing Equipment)

16.1	PI will consign to OKI the following manufacturing equipment (the “CONSIGNED EQUIPMENT”):

Name of CONSIGNED EQUIPMENT[***]

Name of Manufacturer [***]

Composition of CONSIGNED EQUIPMENT[***]


	16	Confidential

Quantity [***]

16.2

The IMPLANTER will be located at OKI’s [***] wafer fabrication facility. The IMPLANTER will not be re-located without PI’s prior written consent. OKI will provide PI a minimum of [***] ([***]) month’s advance notice of a plan to move the IMPLANTER. The terms of any IMPLANTER move will be negotiated in good faith mutually agreed upon in writing and should at least anticipate: (a) adequate WAFER inventory to maintain VOLUME PRODUCTION deliveries during the duration of the move, (b) re-qualification of the IMPLANTER at the new location, and (c) that OKI would pay all costs of the move, if such move is solely decided by OKI.

16.3

OKI, in cooperation with the CONSIGNED EQUIPMENT supplier, will be responsible for the installation, connection to existing equipment, testing and qualification of the CONSIGNED EQUIPMENT at OKI’s wafer fabrication facility. All cost shall be borne by PI. Notwithstanding above, such cost shall not exceed [***] ([***]) US dollars.

16.4

OKI will be responsible for the removal and the return to PI of the CONSIGNED EQUIPMENT upon termination or expiration of this Agreement. All cost shall be borne by XX, in case of an expiration of this Agreement or when this Agreement is terminated by OKI due to a fault of PI. Notwithstanding above, such cost shall not exceed [***] ([***]) US dollars.

16.5

OKI shall use its best efforts for, and be responsible for, the maintenance, operation and repair of the CONSIGNED EQUIPMENT. OKI shall complete such repair in no more than [***] ([***]) calendar days, provided, however, that if a repair cannot be completed within [***] ([***]) calendar days from discovery of the need for such repair, then OKI shall give immediate written notice to COMPANY describing the problem preventing repair in such [***] ([***]) day period, including a best efforts firm schedule for completing the repair. PI will pay for the repair of the CONSIGNED EQUIPMENT unless the need for the repair is due to OKI’s improper operation of the CONSIGNED EQUIPMENT.

16.6	OKI shall not modify the CONSIGNED EQUIPMENT without a prior written consent of PI.

16.7	OKI shall not lend or transfer the CONSIGNED EQUIPMENT to any third party, use the CONSIGNED EQUIPMENT for other than the benefit of PI, or encumber the


	17	Confidential

CONSIGNED EQUIPMENT with any lien or other security interest, without PI’s prior written consent.

16.8 OKI shall only process DC WAFERS with the CONSIGNED EQUIPMENT. The processing of other wafers requires the prior written consent of PI.

16.9	DC WAFERS cycle time through the CONSIGNED EQUIPMENT shall be no more than [*] ([*]) business days.

Article 17.(Upgrade of Manufacturing Equipment)

17.1	OKI owns the following manufacturing equipment defined below (the IMPLANTER), which is a high energy implanter:

Name of IMPLANTER [***]

Name of Manufacturer [***]

Current Energy Rating [***]

Quantity [***]

IMPLANTER Serial Number [***]

17.2	OKI will perform the services of upgrading the IMPLANTER in accordance with the specification agreed upon in writing by both parties. This will include increasing the IMPLANTER’S operation capability to [*] and fitting it with a [*].

17.3

OKI will own the IMPLANTER, which will be installed in OKI’s **** wafer fabrication facility after completion of the upgrade. OKI will be responsible for full installation, connection to existing equipment, testing and qualification of the IMPLANTER, at the **** wafer fabrication facility. Qualification will be in accordance with a qualification plan mutually agreed upon in writing between OKI and PI. Qualification shall not be complete until the date PI reasonably agrees in writing that the foregoing qualification plan has been met.

17.4

The CONSIGNED EQUIPMENT currently operating in OKI’s **** wafer fabrication facility will remain in production operation until the IMPLANTER has been qualified per Section 17.3. The CONSIGNED EQUIPMENT will remain in OKI’s **** wafer fabrication facility as a backup for the IMPLANTER and will be put back into production if appropriate.

17.5	OKI shall keep the IMPLANTER in operating condition and available for VOLUME PRODUCTION during the Term of this Agreement. OKI shall be responsible for the


	18	Confidential

maintenance and operation of the IMPLANTER. OKI will pay for all repairs of the IMPLANTER. Any repairs should be completed in reasonable time provided, however, that if a repair cannot be completed within **** (****) calendar days from discovery of the need for such repair, then OKI shall give immediate written notice to PI describing (1) the problem preventing repair in such **** (****) day period, and (2) a firm schedule for completing the repair.

17.6

OKI shall not modify the upgraded IMPLANTER without the prior written approval of PI. OKI will pay for any modifications of the IMPLANTER. PI shall determine whether the approved modification requires re-qualification of the IMPLANTER. XXX agrees to re-qualify the IMPLANTER if so determined in accordance with a mutually agreed-to, written qualification plan. Such re-qualification will be at OKI’s expense.

17.7	OKI shall not lend or transfer the upgraded IMPLANTER to any third party or encumber the upgraded IMPLANTER with any lien or other security interest, without PI’s prior written consent.

17.8

The IMPLANTER will be used for manufacturing WAFERS for PI, and for PI research and development activities. The IMPLANTER will not be used for the benefit of competitors of PI. The operation of the IMPLANTER for any other use is permitted as long as delivery and FOUNDRY CAPACITY commitments by OKI to PI are met.

17.9

The IMPLANTER will not be re-located without PI’s prior written consent. OKI will provide PI a minimum of [***] ([***]) month’s advance notice of a plan to move the IMPLANTER. The terms of any IMPLANTER move will be negotiated in good faith mutually agreed upon in writing and should at least anticipate: (a) adequate WAFER inventory to maintain VOLUME PRODUCTION deliveries during the duration of the move and re-qualification, (b) a plan to re-qualify the IMPLANTER at the new location, and (c) that OKI would pay all costs of the move if such move is solely for OKI’s benefit.

Article 18.(Miscellaneous Provisions)

18.1

Entire Agreement. This Agreement embodies the entire understanding of the parties as it relates to the subject matter hereof and this Agreement supersedes any prior agreements or understandings between the parties with respect to such subject matter, including without limitation all of the provisions (including license grants) under the LWS AGREEMENT. Any potential or existing liabilities and claims regarding the purchase of and payment for


	19	Confidential

Wafers under the terms of the LWS Agreement are declared by OKI and PI to be paid in full and without further recourse.

18.2	Article Headings. The article and section headings herein are for convenience only and shall not affect the construction hereof.

18.3	Waiver. Should either PI or OKI fail to enforce any provision of this Agreement or to exercise any right in respect thereto, such failure shall not be construed as constituting a waiver or a continuing waiver of its rights to enforce such provision or right or any other provision or right.

18.4	No License. Nothing contained in this Agreement shall be construed as conferring by implication, estoppel or otherwise upon either party hereunder any license or other right except as expressly set forth herein.

18.5

English Language. This Agreement is in the English language only, which language shall be controlling in all respects, and all versions hereof in any other language shall be for accommodation only and shall not be binding upon the parties. All communications between OKI and PI to effect the terms of this Agreement shall be in the English language only.

18.6

No Agency. The parties to this Agreement are independent contractors. There is no relationship of agency, partnership, joint venture, employment or franchise between the parties. Neither party has the authority to bind the other or to incur any obligation on its behalf. OKI shall not have, and shall not represent that it has, any power, right or authority to bind PI, or to assume or create any obligation or responsibility, express or implied, on behalf of PI or in PI’s name, except as herein expressly permitted.


	20	Confidential

18.7

Notices. Any notice required or permitted to be given by either party under this Agreement shall be deemed to have been given at the time it is delivered in writing by person or by xxxxxxx (provided that in the case of telefax, a copy of the notice will promptly be delivered by overnight courier) to the other party at the following respective addresses or such new addresses as may from time to time be supplied hereunder.

To:OKI Electric Industry Co., Ltd.

550-1 Higashiasakawa-cho

Hachioji-shi, Tokyo 193-8550, Japan

Attention: Xxxxx Xxxxxxxx,

General Manager

Marketing & Sales Division

Silicon Manufacturing Company

Fax: 00-000-00-0000

To:Power Integrations, Inc.

0000 Xxxxxxx Xxxxxx.

San Jose, CA 95138

Attention: President

Fax: (000) 000-0000

18.8

Invalidity. If any provision of this Agreement, or the application thereof to any situation or circumstance, shall be invalid or unenforceable, the remainder of this Agreement or the application of such provision to situations or circumstances other than those as to which it is invalid or unenforceable, shall not be affected; and each remaining provision of this Agreement shall be valid and enforceable to the fullest extent permitted by applicable law. In the event of such partial invalidity, the parties shall seek in good faith to agree on replacing any such legally invalid provisions with provisions which, in effect, will, from an economic viewpoint, most nearly and fairly approach the effect of the invalid provision.

18.9

Assignment. This Agreement and any rights or licenses granted herein shall be binding upon and inure to the benefit of the parties hereto and their respective successors and assigns. Neither party shall assign any of its rights or privileges hereunder without the prior written consent of the other party except as set forth in Section 13.5. Such consent shall not be unreasonably withheld.


	21	Confidential

18.10

Amendment. This Agreement may not be extended, supplemented or amended in any manner except by an instrument in writing expressly referring to this Agreement and duly executed by authorized officers of both Parties.

18.11

Force Majeure. Either party shall be excused for failures and delays in performance caused by war, declared or not, any laws, proclamations, ordinances or regulations of the government of any country or of any political subdivision of any country, or strikes, lockouts, floods, fires, explosions or such catastrophes as are beyond the control or without the material fault of such party (“Causes”). Any party claiming any such excuse for failure or delay in performance due to such Causes shall give prompt notice thereof to the other party, and neither party shall be required to perform hereunder during the period of such excused failure or delay in performance except as otherwise provided herein. This provision shall not, however, release such party from using its best efforts to avoid or remove all such Causes and such party shall continue performance hereunder with the utmost dispatch whenever such Causes are removed. In the event that the period of excused performance continues for ninety (90) days, this Agreement may be terminated by the affected party with written notice to the other party without liability.

18.12

Indemnity. Both parties agree that neither party shall assume any responsibility or be liable for death or any injury or accident which may occur to any personnel of the other party or the property of such personnel during any visits to its facility, or otherwise. Each party agrees to indemnify the other party and to hold such other party harmless from and against all liabilities, claims and demands on account of personal injuries (including death), or loss or damage to property, arising out of or in any manner connected with the visits of its personnel to such other party’s offices or facilities and occasioned by the negligence of such personnel, and it shall defend at its own expense any and all actions based thereon and shall pay all reasonable charges of attorneys and all costs and other expenses arising therefrom.

18.13

Arbitration. All disputes and differences between OKI and PI arising out of or under this Agreement or the LWS Agreement shall be settled amicably through negotiations. In case such dispute or difference cannot be settled amicably through negotiations in a reasonable period of time, it shall be finally settled by arbitration in San Francisco, California if initiated by OKI and in Tokyo, Japan if initiated by PI pursuant to the Japan-American


	22	Confidential

Arbitration Agreement of September 16, 1952, by which each party is bound. The award rendered by arbitrator(s) shall be final and binding upon the parties hereto. The arbitrator’s award shall be fully enforceable in any court having jurisdiction of the parties and OKI irrevocably consents to the non-exclusive jurisdiction of the California courts for matters related to injunctive relief or the enforcement of such award. Notwithstanding the foregoing, if the dispute involves the protection of the CONFIDENTIAL INFORMATION or INTELLECTUAL PROPERTY RIGHTS then either party make seek injunctive relief immediately from the courts.

18.14

[***]

18.15

Governing Law. This Agreement and matters connected with the performance hereof shall be construed, interpreted, applied and governed in all respects in accordance with the laws of California and the United States without regard to conflict of laws principles.

18.16

OKI and PI shall each enter into separate written agreements with each of their subsidiaries who wish to exercise any rights under this Agreement, binding the subsidiary to the terms and conditions of this Agreement. OKI and PI each guarantee to the other the performance of their respective subsidiaries under this Agreement, and each will indemnify and hold harmless the other from any costs, damages, or liabilities incurred by the other arising out of a breach by a subsidiary of the terms and conditions of this Agreement.


	23	Confidential

IN WITNESS WHEREOF, the parties have caused this Agreement to be executed in their respective corporate names by their duly authorized representatives on the date written below.

OKI Electric Industry Co., Ltd.

Signature: /s/ X. XXXXXXXX

Name: Xxxxx Xxxxxxxx

Xxxxx: General Manager

Date: May 7, 2003

Power Integrations, Inc.

Signature: /s/ XXXXXXXX X. XXXXXX

Name: XXXXXXXX X. XXXXXX

Xxxxx: Vice President

Date: May 2, 2003


	24	Confidential

EXHIBIT A

OKI FOUNDRY CAPACITY and PI ANNUAL FORECAST

1.OKI FOUNDRY CAPACITY:

The following FOUNDRY CAPACITY will effective from the Effective Date:

SC WAFERS = [***] WAFERS / month

DC WAFERS = [***] WAFERS / month

2.PI’s projected PI ANNUAL FORECAST of WAFER orders (non-binding)

OKI Fiscal Year	2003	2004	2005	2006	2007
SC WAFERS	[***]	[***]	[***]	[***]	[***]
DC WAFERS	[***]	[***]	[***]	[***]	[***]


	A-1	Confidential

EXHIBIT B

WAFERS PRICE

SC WAFERS BASE_PRICE = [***]

DC WAFERS BASE_PRICE = [***]

F/X_BASE = [***]

Initial F/X_RATE = [***]

A new F/X_RATE is only established at the time of placing a PO for WAFERS if the Previous Month’s Average daily exchange rate is equal to or greater than ±[***] from the current F/X_RATE. The new F/X_RATE will be set to the Previous Month’s Average exchange rate and will remain in effect for at least the month it was established.

The actual WAFERS PURCHASE_PRICE, by WAFER TYPE, used at the time of order will be calculated by the following formula:

PURCHASE_PRICE =

[***]

Examples: [***]

Nominal F/X Rate Example: F/X_RATE = [***]:

PURCHASE_PRICE = [***]

Higher F/X Rate Example: New F/X_RATE = [***]:

PURCHASE_PRICE = [***]

Lower F/X Rate Example: New F/X_RATE = [***]:

PURCHASE_PRICE = [***]

The term of validity for the DC WAFERS BASE PRICE above shall be from the Effective Date until [***] ([***]) years from the Effective Date of this Agreement or until the date on which [***] DC WAFERS have been accepted by PI under this Agreement, provided, however, that both parties shall review the DC WAFERS BASE_PRICE at any time during such [***] ([***]) year period upon request of either party, if either party considers that the quantity of DC WAFERS to be purchased by PI during such [***] ([***]) year period does not reach [***] WAFERS. After such term of validity, DC WAFERS BASE PRICE shall be [***].


	B-1	Confidential

EXHIBIT C

COMMON SPECIFICATION

The COMMON SPECIFICATION(S) is the [***], to produce and deliver WAFERS to PI under the WSA during the Term of this Agreement.


	C-30	Confidential

Document Metadata

Table of Contents

AMENDED AND RESTATED WAFER SUPPLY AGREEMENT

Document Metadata