SLR-07-01 SLR-05-15Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • November 5th, 2015
Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be fitted and/or be used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions*
E/ECE/324/Rev.1/Add.50/Rev.4−E/ECE/TRANS/505/Rev.1/Add.50/Rev.4Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • October 24th, 2021
Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions*
AgreementAgreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • June 29th, 2021
Supplement 3 to the 03 series of amendments – Date of entry into force: 16 October 2018 Supplement 4 to the 03 series of amendments – Date of entry into force: 29 December 2018
AGREEMENTAgreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • October 1st, 2012
Class 3 Medium pressure parts as safety valves or protected by safety valve including tubes and fittings containing CNG at a pressure higher than 450 kPa and up to 3,000 kPa (3 MPa).
AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF...Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • June 7th, 2010
On 21 May 2010, the Secretary-General received from the Administrative Committee of the above Agreement, pursuant to article 12 (1) of the Agreement, amendments proposed at the forty-fourth session of the Administrative Committee to Regulation No. 91.
AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF...Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • December 14th, 2007
On 5 February 2002, the Secretary-General received from the Administrative Committee of the above Agreement, pursuant to article 12 (1) of the Agreement, amendments proposed to the above Regulation.
E/ECE/324/Rev.2/Add.106/Rev.6−E/ECE/TRANS/505/Rev.2/Add.106/Rev.6Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • November 25th, 2014
Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions*
E/ECE/324/Rev.2/Add.136/Rev.2 −E/ECE/TRANS/505/Rev.2/Add.136/Rev.2Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • September 14th, 2023
Supplement 2 to the 01 series of amendments – Date of entry into force: 28 May 2019 Supplement 3 to the 01 series of amendments – Date of entry into force: 3 January 2021 02 series of amendments – Date of entry into force: 9 June 2021
E/ECE/324/Rev.1/Add.54/Rev.2−E/ECE/TRANS/505/Rev.1/Add.54/Rev.2Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • December 18th, 2015
This document is meant purely as documentation tool. The authentic and legal binding texts of the supplements and the corrigenda are listed on the following page.
AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF...Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • December 18th, 2007
On 23 June 2000, the Secretary-General received from the Administrative Committee of the above Agreement, pursuant to article 12 (1) of the Agreement, amendments proposed to the above Regulation.
AgreementAgreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • June 15th, 2021
Supplement 7 to the 02 series of amendments – Date of entry into force: 8 October 2015Supplement 8 to the 02 series of amendments – Date of entry into force: 20 January 2016
AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF...Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • December 14th, 2015
On 30 November 2015, the Secretary-General received from the Administrative Committee of the above Agreement, pursuant to article 12 (1) of the Agreement, amendments to Regulation No. 61 proposed at the sixty-first session of the Administrative Committee.
CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF THESE...Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • August 25th, 2020
Corrigendum 2 to Revision 1 of the Regulation, subject of Depositary Notification C.N.232.1992.TREATIES-32 dated 11 September 1992 (French only)
AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF...Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • September 18th, 2009
On 7 September 2009, the Secretary-General received from the Administrative Committee of the above Agreement, pursuant to article 12 (1) of the Agreement, certain amendments proposed to Regulation No. 11.
E/ECE/324/Rev.2/Add.135−E/ECE/TRANS/505/Rev.2/Add.135Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • February 8th, 2016
This document is meant purely as documentation tool. The authentic and legal binding text is: ECE/TRANS/WP.29/2015/69 (as amended by paragraph 75 of the report ECE/TRANS/WP.29/1116).
E/ECE/324/Rev.1/Add.15/Rev.8−E/ECE/TRANS/505/Rev.1/Add.15/Rev.8Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • July 9th, 2020
Corrigendum 1 to Revision 7 of the Regulation (French only) – Date of entry into force: 26 June 2013 Corrigendum 2 to Revision 7 of the Regulation (English only) – Erratum by the secretariat Supplement 4 to the 06 series of amendments – Date of entry into force: 13 February 2014 Supplement 5 to the 06 series of amendments – Date of entry into force: 10 June 2014
E/ECE/324/Rev.1/Add.12/Rev.8−E/ECE/TRANS/505/Rev.1/Add.12/Rev.8Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • March 3rd, 2014
Where:zR = braking rate of the trailer, zR+M = braking rate of the vehicle combination (motor vehicle and trailer), R = rolling resistance value = 0.01, PM = total normal static reaction between the road surface and the wheels of towing vehicle for trailer (kg), PR = total normal static reaction between the road surface and the wheels of trailer (kg), P1 = part of the mass of the trailer borne by the unbraked axle(s) (kg), P2 = part of the mass of the trailer borne by the braked axle(s) (kg), v1 = initial speed (km/h), v2 = final speed (km/h).
E/ECE/324/Rev.2/Add.106/Rev.5/Amend.5−E/ECE/TRANS/505/Rev.2/Add.106/Rev.5/Amend .5Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • July 31st, 2017
Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions*
E/ECE/324/Add.4/Rev.5-E/ECE/TRANS/505/Add.4/Rev.5 26 June 2014Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • June 27th, 2014
Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions*
AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF...Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • December 12th, 2007
On 17 August 2001, the Secretary-General received from the Administrative Committee of the above Agreement, pursuant to article 12 (1) of the Agreement, amendments proposed to the above Regulation.
AgreementAgreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • August 23rd, 2021
Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions*
AgreementAgreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • April 15th, 2015
Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions*
AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF...Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • August 8th, 2017
On 3 August 2017, the Secretary-General received from the Administrative Committee of the above Agreement, pursuant to article 12 (1) of the Agreement, amendments to Regulation No. 54 proposed at the sixty-sixth session of the Administrative Committee.
AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF...Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • December 14th, 2007
On 13 January 2003, the Secretary-General received from the Administrative Committee of the above Agreement, pursuant to article 12 (1) of the Agreement, amendments proposed to the above Regulation.
AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF...Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • April 6th, 2016
On 29 March 2016, the Secretary-General received from the Administrative Committee of the above Agreement, pursuant to article 12 (1) of the Agreement, amendments to Regulation No. 48 proposed at the sixty-second session of the Administrative Committee.
AgreementAgreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • December 9th, 2016
Supplement 10 to the 02 series of amendments - Date of entry into force: 2 February 2007 Supplement 11 to the 02 series of amendments - Date of entry into force: 24 October 2009 Supplement 12 to the 02 series of amendments - Date of entry into force: 23 June 2011 Supplement 13 to the 02 series of amendments - Date of entry into force: 15 July 2013 Supplement 14 to the 02 series of amendments - Date of entry into force: 3 November 2013
AgreementAgreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • June 8th, 2017
This document is meant purely as documentation tool. The authentic and legal binding texts of the supplements and the corrigenda are listed on the following page.
AGREEMENTAgreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • August 22nd, 2016
Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on 20 March 1958.
AGREEMENTAgreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • November 30th, 2018
Revision 2, including the amendments which entered into force on 16 October 1995)Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • July 14th, 2015
Supplement 1 to the 05 series of amendments – Date of entry into force: 17 March 2010 Supplement 2 to the 05 series of amendments – Date of entry into force: 19 August 2010
AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF...Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • December 12th, 2007
On 17 August 2001, the Secretary-General received from the Administrative Committee of the above Agreement, pursuant to article 12 (1) of the Agreement, amendments proposed to the above Regulation.
E/ECE/324/Rev.2/Add.133 −E/ECE/TRANS/505/Rev.2/Add.133Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • March 31st, 2021
Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions*
AgreementAgreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • November 17th, 2015
Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted
AgreementAgreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • October 11th, 2020
Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for reciprocal recognition of approvals granted on the basis of these prescriptions*
E/ECE/324/Add.6/Rev.6−E/ECE/TRANS/505/Add.6/Rev.6Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles • November 23rd, 2012
Supplement 16 to 02 series of amendments: Date of entry into force: 19 August 2010 Supplement 17 to 02 series of amendments: Date of entry into force: 30 January 2011 Corrigendum 1 to Supplement 15 to 02 series of amendments: Date of entry into force: 09 March 2011 Supplement 18 to 02 series of amendments: Date of entry into force: 23 June 2011
