Acoustic Barrier definition

Acoustic Barrier means a barrier or berm positioned such that it completely interrupts the line of sight between the Equipment and the noise sensitive Points of Reception continuous without holes, gaps and other penetrations, and having surface mass of at least 20 kilograms per square metre;
Sample 1Sample 2
Acoustic Barrier means a noise control measure such as a wall;
Sample 1Sample 2
Acoustic Barrier means a barrier or berm positioned such that it completely interrupts the line of sight between the Equipment (with the exemption of the backhouse stack outlet) and the noise sensitive Points of Reception, and is continuous, without holes, gaps or other penetrations, and has a surface mass of at least 20 kilograms per square metre. Acoustic Barrier also means a U-shaped earthen berm with a total length of approximately 345 metres and height of at least 5 metres, and located as depicted in Figure 4-4 and Table T4 of the Acoustic Assessment Report dated June 18, 2012, prepared and signed by Bhuwan Prasad, Genivar Inc. The barrier shall be continuous without any holes, gaps or other penetrations, and have a surface mass of at least 20 kilograms per square metre.
Sample 1

Examples of Acoustic Barrier in a sentence

  • HOKLAS Accredited Laboratory Sound Reduction Index Measurement for Acoustic Barrier Panels according to ISO 140-3: 1995 for MTRC Contract 520A Stage 1.

  • UMRB partner agencies also participated in the 2016 Asian Carp Risk Assessment exercise, hosted by the University of Minnesota; the March 2016 Minnesota Invasive Asian Carp Forum hosted by the MNDNR; the May 17-18, 2016 Acoustic Barrier workshop in LaCrosse, Wisconsin; and the USGS Sound Deterrent Workshop via teleconference.

  • Acoustic Barrier DetailDetail of the specification and appearance of the acoustic barrier proposed along the Chiltern Avenue boundary shall be submitted to and approved in writing by the Local Planning Authority.

  • HOKLAS Accredited Laboratory Sound Reduction Index Measurement for Acoustic Barrier Panels according to ISO 140-3: 1995 for MTRC Contract 520A Stage 2.

  • Contents1.0 Introduction 11.1 Process 12.0 Scope 13.0 Eligibility for Consideration 23.1 Areas Eligible for study and Potential Mitigation 23.2 Sound Level Criteria for Local Improvement 34.0 Mitigation and Design 34.1 Acoustic Barrier Design 3 1.0 Introduction‌This guideline addresses the need for study and potential mitigation when considering the retrofitting of noise abatement measures into existing neighbourhoods.

  • HOKLAS Accredited Laboratory Sound Reduction Index Measurement for Acoustic Barrier Panels for West Rail CC609 according to ISO 140-3: 1995.

  • Maji – Design, Manufacture and Characterization of an Acoustic Barrier Made...

  • Acoustic Barrier [pre-commencement condition] Prior to the commencement of the development hereby approved, full details of the acoustic barrier to be positioned south of the northern boundary hedge, shall be submitted to and approved by the Local Planning Authority in writing.

  • All Conditions in the Campus Plan Should Remain Until the Acoustic Barrier is Built and TestedAll conditions in the Campus Plan relating to Jacobs Field should remain in place until the Commission decides any application to modify the Campus Plan.

  • Option 2 – Acoustic Barrier around the RTUs Another option, if for some reason quieter RTUs are not possible, is to install an acoustic barrier around the RTUs. In order to achieve the required noise mitigation to meet ENCG noise limits, the acoustic barrier must have a minimum height of 2 m and have a minimum surface density of 20 kg/m2.

Related to Acoustic Barrier

  • Barrier means Barrier Level x R (initial).

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Polystyrene foam means blown polystyrene and expanded and

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR Part 82 subpart G with supplemental tables of alternatives available at (http://www.epa.gov/snap/).

  • Defoliant means any substance or mixture of substances intended for causing the leaves or foliage to drop from a plant, with or without causing abscission.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Soft drinks means nonalcoholic beverages that contain natural or artificial sweeteners. "Soft drinks" does not include beverages that contain milk or milk products, soy, rice, or similar milk substitutes, or that contains greater than fifty per cent vegetable or fruit juice by volume.

  • Disposable respirator means a respirator for which maintenance is not intended and that is designed to be discarded after excessive breathing resistance, sorbent exhaustion, physical damage, or end-of-service-life renders it unsuitable for use. Examples of this type of respirator are a disposable half-mask respirator or a disposable escape-only self-contained breathing apparatus (SCBA).

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Low-level radioactive waste or “waste” means radioactive material that consists of or contains class A, B, or C radioactive waste as defined by 10 C.F.R. 61.55, as in effect on January 26, 1983, but does not include waste or material that is any of the following:

  • coronavirus means severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2);

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.

  • Graffiti shall not include: (1) any sign or banner that is authorized by, and in compliance with, the applicable requirements of the San Francisco Public Works Code, the San Francisco Planning Code or the San Francisco Building Code; or (2) any mural or other painting or marking on the property that is protected as a work of fine art under the California Art Preservation Act (California Civil Code Sections 987 et seq.) or as a work of visual art under the Federal Visual Artists Rights Act of 1990 (17 U.S.C. §§ 101 et seq.). Any failure of Contractor to comply with this section of this Agreement shall constitute an Event of Default of this Agreement.

  • Air-purifying respirator means a respirator with an air-purifying filter, cartridge, or canister that removes specific air contaminants by passing ambient air through the air-purifying element.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Bottle means any vessel intended to contain liquids and having a capacity of not more than 43

  • Valve means a device used to control the flow of water in the irrigation system.

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • Semiconductor cleanrooms means the integrated systems, fixtures, piping, partitions, flooring,

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.