Acoustical Tile definition

Acoustical Tile. Second Look", conforming to the following: 1. Size: 24 x 48 inches. 2. Thickness: 3/4 inches. 3. Composition: Mineral.
Acoustical Tile. Second Look", conforming to the following: 1 . Size: 24 x 48 inches. 2. Thickness: 3/4 inches. 3. Composition: Mineral. 4. NRC Range: .55 to .60. 5. STC Range: 35 to 39. 6. Flame Spread: ASTME84,0-25. XX Xxxxx, 00 or under. 7. Edge: Tegular, Lay-in. 8. Surface Color: White. 9. Surface Finish: Factory-applied washable vinyl latex paint.
Acoustical Tile. Xxxxxxxxx 2' x 4' x 5/8" Cortega minaboard flat fissured Ceiling Height: 9'-0" LIGHTING/ELECTRICAL Light Fixtures: Lithonia 2 GT - 440 2' x 4' 4-lamp with acrylic lens Emergency Egress Lithonia #6 ELM or combination Lighting: unit: Lithonia #H2MSW1R Exit Signs: Lithonia #MSW3 REL. Audio/Visual Strobes: HVAC Diffusers: 2' x 2' perf. face Return Air: 2' x 2' perf. face Exhaust Fans: Thermostats: SPRINKLERS Type: Exposed chrome FINISHES Carpet: 26 oz level loop or 30 oz cut pile; 22 oz. textured level loop Base: Xxxxx; 4"h rubber cove Vinyl Composition Tile: Tarkett; Expressions

Examples of Acoustical Tile in a sentence

  • Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings.

  • Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings.

  • Application of Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels in Areas Requiring Seismic Restraint.

  • Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels.

  • In other parts, there are a lot of similarities in these two descriptions.Wide international cooperation is required to define the standardized IoT ecosys- tem.

  • ASTM C 636 Recommended Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels.

  • Standard Specifications for Metal Suspension Systems for Acoustical Tile and Lay-In Panel Ceilings.

  • Recommended Practice for Installation of Metal Suspension System for Acoustical Tile and Lay-in Panels.

  • Standard Practice for Application of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Requiring Seismic Restraint.

  • Recommended Practice for Installation of Metal Suspension System for Acoustical Tile and Lay-In Panels.

Related to Acoustical Tile

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • chemical tanker means a ship constructed or adapted and used for the carriage in bulk of any liquid product listed in chapter 17 of the International Bulk Chemical Code;

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Low-level radioactive waste or “waste” means radioactive material that consists of or contains class A, B, or C radioactive waste as defined by 10 C.F.R. 61.55, as in effect on January 26, 1983, but does not include waste or material that is any of the following:

  • Motor-driven cycle means every motorcycle that has a gasoline engine that (i) displaces less than

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Crawling bug insecticide means any insecticide product that is designed for use against ants, cockroaches, or other household crawling arthropods, including, but not limited to, mites, silverfish or spiders. “Crawling Bug Insecticide” does not include products designed to be used exclusively on humans or animals, or any house dust mite product. For the purposes of this definition only:

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Electrical Fitter means an employee who is mainly employed in the workshops manufacturing, fitting, and repairing electrical instruments, machines, and apparatus. Electrical fitting in this definition shall include armature and transformer winding, and people solely engaged in making and repairing instruments. The legitimate possession of a certificate of competency in this particular class of work issued by the Electrical Licensing Board under the Electricity Act 1994 shall be recognised as proof of efficiency.

  • Dry cleaning fluid means any non-aqueous liquid product designed and labeled exclusively for use on: fabrics which are labeled "for dry clean only", such as clothing or drapery; or S-coded fabrics. Dry cleaning fluid includes, but is not limited to, those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place. Dry cleaning fluid does not include spot remover or carpet and upholstery cleaner. For the purposes of this definition, S-coded fabric means an upholstery fabric designed to be cleaned only with water-free spot cleaning products as specified by the Joint Industry Fabric Standards Committee.

  • Critical Component means a part identified as critical by the design approval holder during the product type validation process, or otherwise by the exporting authority. Typically, such components include parts for which a replacement time, inspection interval, or related procedure is specified in the Airworthiness Limitations section or certification maintenance requirements of the manufacturer’s maintenance manual or Instructions for Continued Airworthiness.

  • Critical areas means any of the following areas or ecosystems: wetlands, critical aquifer recharge areas, streams, fish and wildlife habitat conservation areas, frequently flooded areas, and geologically hazardous areas as defined by the Growth Management Act (RCW 36.070A.170).

  • Glass cleaner means a cleaning product designed primarily for cleaning surfaces made of glass. Glass cleaner does not include products designed solely for the purpose of cleaning optical materials used in eyeglasses, photographic equipment, scientific equipment and photocopying machines.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR Part 82 subpart G with supplemental tables of alternatives available at (http://www.epa.gov/snap/).

  • Critical access hospital or “CAH” means a hospital licensed as a critical access hospital by the department of inspections and appeals pursuant to rule 481—51.52(135B).

  • Soft drinks means nonalcoholic beverages that contain natural or artificial sweeteners. "Soft drinks" does not include beverages that contain milk or milk products, soy, rice, or similar milk substitutes, or that contains greater than fifty per cent vegetable or fruit juice by volume.

  • Planting strip means the part of a street right-of-way between the public right-of-way and the portion of the street reserved for vehicular traffic or between the abutting property line and the curb or traveled portion of the street, exclusive of any sidewalk.

  • Ballast water means water with its suspended matter taken on board a ship to control trim, list, draught, stability or stresses of the ship.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Defoliant means any substance or mixture of substances intended for causing the leaves or foliage to drop from a plant, with or without causing abscission.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • Critical control point means a point, step, or procedure in a food proc- ess at which control can be applied, and a food safety hazard can as a result be prevented, eliminated, or reduced to acceptable levels.

  • Dry cleaning facility means a facility engaged in the cleaning of fabrics in an essentially nonaqueous solvent by means of one or more washes in solvent, extraction of excess solvent by spinning, and drying by tumbling in an airstream. The facility includes, but is not limited to, any washer, dryer, filter, and purification systems, waste disposal systems, holding tanks, pumps, and attendant piping and valves.

  • Dielectric material means a material that does not conduct direct electrical current. Dielectric coatings are used to electrically isolate UST systems from the surrounding soils. Dielectric bushings are used to electrically isolate portions of the UST system (e.g., tank from piping).

  • Critical area means any of the following: