Airworthiness Limitations definition

Airworthiness Limitations means a life limitation applicable to life limited part or any maintenance task which is mandatory as a condition of the type certificate of an aeronautical product or as specified by Director General.
Sample 1Sample 2Sample 3
Airworthiness Limitations. All airworthiness limitations checks which are due before the next phase check shall be accomplished. In the event that these checks are performed in phases in conjunction with the system/power plant/zonal C check, the current phase shall be performed with the required return condition C Check phase.
Sample 1

Examples of Airworthiness Limitations in a sentence

  • The term ‘‘FC’’ in the ‘‘First Inspection’’ column of any table in Chapter 5–40, Airworthiness Limitations, DGT 113877, Revision 11, dated November 2017, means total flight cycles.

  • This AD was prompted by the need to revise the Airworthiness Limitations section (ALS) of the existing aircraft maintenance manual (AMM) to add new and more restrictive tasks for the control column sprocket gear assembly and control wheel column assembly, to address the new limit of validity and update the usage assumptions and conditions for operations on unpaved and grass runways, and to correct an error in the horizontal stabilizer primary trim system secondary power source operational test.

  • No foreign aircarrier or foreign person may operate a U.S.-registered airplane identified in paragraph (a) of this section after the applicable date identified in Table 1 of this section, unless an Airworthiness Limitations section (ALS) approved under Appendix H to part 25 or § 26.21 of this chapter is incorporated into its maintenance program.

  • Acceptance or approval, as appropriate, of instructions for continued airworthiness (ICA), including the Airworthiness Limitations Section (ALS) of the ICA, will be managed by the VA office responsible for the product.

  • The term ‘‘LDG’’ in the ‘‘First Inspection’’ column of any table in Chapter 5–40, Airworthiness Limitations, DGT 113877, Revision 11, dated November 2017, means total airplane landings.

  • Typically, such components include parts for which a replacement time, inspection interval, or related procedure is specified in the Airworthiness Limitations Section or certification maintenance requirements of the manufacturer’s maintenance manual or instructions for continued airworthiness.

  • In disputing the assessment, the employer claimed that the fund’s failure to notify it that the interest rate was changing constituted common law fraud by omission and common law negligent misrepresentation by omission.

  • The LOV will be included in the Airworthiness Limitations section of the Instructions for Continued Airworthiness and will apply regardless of how or by whom the airplane is operated.

  • For new airplanes, the FAA proposed to amend § 25.571 and Appendix H to part 25 to require that applicants for a new type certificate establish an initial operational limit and include that limit in the Airworthiness Limitations section of the Instructions for Continued Airworthiness for the airplane.

  • No certificate holder may operate an airplane identified in§ 26.21(g) of this chapter after July 14, 2013, unless an Airworthiness Limitations section approved under Appendix H to part 25 or § 26.21 of this chapter is incorporated into its maintenance program.

Related to Airworthiness Limitations

  • continuing airworthiness means all of the processes ensuring that, at any time in its operating life, the aircraft complies with the airworthiness requirements in force and is in a condition for safe operation;

  • Airworthiness Directive means a requirement for the Inspection, repair or modification of the Engine or any portion thereof as issued by Airworthiness Authorities.

  • Applicable effluent standards and limitations means all State and Federal effluent standards and limitations to which a discharge is subject under the Act, including, but not limited to, effluent limitations, standards of performance, toxic effluent standards and prohibitions, and pretreatment standards.

  • MARPOL 73/78 means the International Convention for the Prevention of Pollution from Ships (1973) as modified by the Protocol of 1978 relating thereto;

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • the 2000 Regulations means the Water Supply (Water Quality) Regulations 2000(b); "the 2001 Regulations" means the Water Supply (Water Quality) Regulations 2001(c);

  • Loss Absorption Regulations means, at any time, the laws, regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities and/or loss absorbing capacity instruments of the United Kingdom, the PRA, the United Kingdom resolution authority, the Financial Stability Board and/or of the European Parliament or of the Council of the European Union then in effect in the United Kingdom including, without limitation to the generality of the foregoing, any delegated or implementing acts (such as regulatory technical standards) adopted by the European Commission and any regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities and/or loss absorbing capacity instruments adopted by the PRA and/or the United Kingdom resolution authority from time to time (whether or not such regulations, requirements, guidelines, rules, standards or policies are applied generally or specifically to the Company or to the Regulatory Group).

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • Design requirements means the written description of the infrastructure facility to be procured pursuant to this article, including:

  • PCI Standards means the applicable Data Security Standards published by the PCI Security Standards Council.

  • Technical Requirements means the Technical Requirements in Section VII of the tendering documents.

  • Technical Standards means the technical standards set out in paragraph 2.4 of the Order Form;

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Environmental Standards means regulations or certification specifications governing designs with regard to noise characteristics, fuel venting, and exhaust emissions of civil aeronautical products and articles.

  • Switching and Tagging Rules means the switching and tagging procedures of Interconnected Transmission Owners and Interconnection Customer as they may be amended from time to time.

  • Environmental and Social Standards or “ESSs” means, collectively: (i) “Environmental and Social Standard 1: Assessment and Management of Environmental and Social Risks and Impacts”; (ii) “Environmental and Social Standard 2: Labor and Working Conditions”; (iii) “Environmental and Social Standard 3: Resource Efficiency and Pollution Prevention and Management”;

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • international flight means all flights other than Domestic Flights.

  • Hague-Visby Rules means the provisions of the International Convention for the Unification of certain rules Relating to Bills of Lading signed at Brussels on 25th August 1924 as amended by the Visby Protocol of 23rd February 1968 and the SDR Protocol of 21st December 1979;

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • international voyage means a voyage from a country to which the present Convention applies to a port outside such country, or conversely.