Angular Plane definition

Angular Plane means an imaginary flat surface projecting over a lot, at an inclined angle measured up from the horizontal.
Sample 1Sample 2Sample 3
Angular Plane means a plane which projects up at a 39 degree angle and is contiguous to the build-to-plane. The angular plane commences at a specified height measured at the build-to-plane and extends across the entire length(s) of the property abutting an improved public street(s).
Sample 1Sample 2Sample 3
Angular Plane means an angular plane of 43 degrees angling up and westward over the site from a point commencing at grade and located 17.0 metres to the east of the site as shown on Map 2 attached hereto (and as shown enlarged on Map 2A);
Sample 1

Examples of Angular Plane in a sentence

  • Schedule D (Angular Plane) shows the areas where the angular plane applies for all lands covered by this By-law.

  • The Downtown Design Guidelines also suggest that a Visual Angular Plane analysis be used to determine the appropriate building envelope for a site.

  • The use of an Angular Plane will also be required as per Section 3.5: Transition from Established Neighbourhoods in the Built Form Standards.

  • Notwithstanding the Angular Plane provisions of table 5.6, Section 7, table 7.2 and Section 7.2.3, to the contrary, the Angular Plane provisions shall not apply.

  • In order to meet the Visual Angular Plane guideline for the apartment while maintaining the floor area ratio, the building would need to be larger at the lower levels resulting in a reduction in the size of the parking garage which in turn would reduce the size of the office building.

  • The proposed retirement home exceeds the Visual Angular Plane by 3 storeys on Pine Street and by 7 storeys on Pearl Street.

  • All buildings and structures shall be within the 45-degree Angular Plane measured from the rear lot of the adjacent RM1 zoning category, which no building or structure shall be permitted.

  • The Visual Angular Plane is calculated by drawing a 45 degree line from the opposite side of the street to the proposed building to see how much of its height would be perceptible to the pedestrian.

  • The building does not utilize setbacks or stepbacks; the height is significant in comparison to adjacent properties; and the massing takes the form of a solid tower.• “Visual Angular Plane Analysis should be used in combination with other tools…to determine appropriate building envelopes.

  • The Visual Angular Plane is calculated by drawing a 45 degree line from the property boundary directly across the street to the proposed building.


More Definitions of Angular Plane

Angular Plane means a plane which projects up at a forty-five degree (45°) angle away from the improved public street right-of-way and establishes the maximum building height. The angular plane commences on the street line on the opposite side of the street and extends up and across the street and the entire width of the lot.
Sample 1
Angular Plane on Queen Street shall mean a plane which projects up to a 54 degree angle and is contiguous to the build-to-plane. The angular plane commences at 17 metres at the build-to-plane and
Sample 1
Angular Plane on Princess Street shall mean a plane which projects up to a 45 degree angle and is contiguous to the build-to-plane. The angular plane commences at 17 metres at the build-to-plane and extends across the entire length of the property abutting an improved public street (Princess Street).
Sample 1
Angular Plane means an imaginary inclined plane, rising over a Lot, drawn at a specified angle from the horizontal, which together with other Building regulations and Lot size requirements, delineates the maximum bulk and Building Height.
Sample 1

Related to Angular Plane

  • Units serving lower income households means units that are occupied by lower income households at an affordable rent, as defined in section 50053 of the Health and Safety Code or, to the extent that the terms of federal, state, or local financing or financial assistance conflicts with section 50053, rents that do not exceed those prescribed by the terms of the financing or financial assistance. Effective October 13, 2017, pursuant to Revenue and Taxation Code section 214(g)(2)(A)(iii), a unit in a property that receives federal low income housing tax credits shall continue to be treated as occupied by a lower income household if the occupants were lower income households on the lien date in the fiscal year in which their occupancy of the unit commenced and the unit continues to be rent restricted, notwithstanding an increase in the income of the occupants of the unit to 140 percent of area median income (AMI), adjusted for family size (“over-income” tenants). Units reserved for lower income households at an affordable rent that are temporarily vacant due to tenant turnover or repairs shall be counted as occupied.

  • Auricular acupuncture means the subcutaneous insertion of sterile, disposable acupuncture needles

  • Defined Benefit Plan Fraction means a fraction, the numerator of which is the projected annual benefit (determined as of the close of the relevant Plan Year) of the Participant under all Defined Benefit Plans maintained by one or more Related Companies, and the denominator of which is the lesser of (i) the product of 1.25 multiplied by the dollar limitation in effect under Section 415(b)(1)(A) of the Code for the Plan Year, or (ii) the product of 1.4 multiplied by the amount which may be taken into account under Section 415(b)(1)(B) of the Code with respect to the Participant for the Plan Year.

  • Stinger-steered automobile or watercraft transporter means an automobile or watercraft transporter

  • Statewide popular election means a general election in which votes are cast for

  • Defined Benefit Fraction means a fraction, the numerator of which is the sum of the participant's projected annual benefits (as defined in Section 23.5.11) under all the defined benefit plans (whether or not terminated) maintained by the Employer, and the denominator of which is the lesser of 125% of the dollar limitation determined for the limitation year under Sections 415(b) and (d) of the Code or 140% of the highest average compensation (as defined in Section 23.5.8), including any adjustments under Section 415(b) of the Code. Notwithstanding the above, if the participant was a participant as of the first day of the first

  • Modular home means a modular unit as defined in Section 15A-1-302.

  • Single Life Annuity means a Participant’s Grandfathered Benefit and/or 409A Benefit, as applicable, payable as an annuity in equal monthly installments over the life of the Participant, commencing as of the Payment Date and terminating in the month in which the Participant dies, with no further payments thereafter.

  • Regular Season means, with respect to any Season, the period beginning on the first day and ending on the last day of regularly scheduled (as opposed to exhibition or playoff) competition between NBA Teams.

  • Defined Contribution Plan Fraction means a fraction, the numerator of which is the sum of the annual additions to a Participant’s accounts under all Defined Contribution Plans maintained by one or more Affiliated Companies, and the denominator of which is the sum of the lesser of (i) or (ii) for such Plan Year and for each prior Plan Year of Service with one or more Related Companies, where (i) is the product of 1.25 multiplied by the dollar limitation in effect under Section 415(c)(1)(A) of the Code for the Plan Year (determined without regard to Section 415(c)(6) of the Code), and (ii) is the product of 1.4 multiplied by the amount which may be taken into account under Section 415(c)(1)(B) of the Code (or Section 415(c)(7) of the Code, if applicable) with respect to the Participant for the Plan Year. Solely for purposes of this definition, contributions made directly by an Employee to a Defined Benefit Plan which maintains a qualified cost-of-living arrangement as such term is defined in Section 415(k)(2) shall be treated as Annual Additions. Notwithstanding the foregoing, the numerator of the Defined Contribution Plan Fraction shall be adjusted pursuant to Treasury Regulations 1.415-7(d)(1) and Questions T-6 and T-7 of Internal Revenue Service Notice 83-10.

  • Aluminum equivalent means the thickness of type 1100 aluminum alloy affording the same attenuation, under specified conditions, as the material in question.

  • Local Subdivision Contribution means the Local Subdivision financial share used for the sole and express purpose for paying or reimbursing the costs certified to the Director under this Agreement for completion of the project.

  • Regular hours worked means those hours which the court is regularly scheduled to work during any given work week. Depending on the particular court, these hours may vary from court to court within the county but remain the same for each work week.

  • Regular Position means an individual Nurse’s job defined as a percentage of full-time hours as set out in the appointment letter referred to in Article 15.

  • regular service means service rendered by an employee in the Cadre on a regular basis other than the service on contract or daily wages or ad-hoc but includes ad-hoc promotion or appointment in a cadre post through due procedure followed by regularization to the extant approved by the competent authority.

  • Aggregate Industry Equivalent Unit Score is then calculated for each S&P Industry Classification, shown on Schedule 2, and is equal to the sum of the Equivalent Unit Scores for each issuer in such industry classification group.

  • Loop Concentrator/Multiplexer or "LCM" is the Network Element that does one or more of the following: aggregates lower bit rate or bandwidth signals to higher bit rate or bandwidth signals (multiplexing); disaggregates higher bit rate or bandwidth signals to lower bit rate or bandwidth signals (demultiplexing); aggregates a specified number of signals or channels to fewer channels (concentrating); performs signal conversion, including encoding of signals (e.g., analog to digital and digital to analog signal conversion); or in some instances performs electrical to optical (E/O) conversion. LCM includes DLC, and D4 channel banks and may be located in Remote Terminals or Central Offices.

  • Urban growth areas means those areas designated

  • life annuity means “life annuity contract” as defined in Pension Legislation that conforms with the Act and Pension Legislation;

  • Motor-driven cycle means every motorcycle that has a gasoline engine that (i) displaces less than

  • Regular license means a license issued to a child care organization indicating that the organization is in substantial compliance with all rules promulgated under this act and, if there is a deficiency, has entered into a corrective action plan.

  • Mobile food unit means a vehicle-mounted food service establishment designed to be readily movable.

  • Regular Employee is one who is hired to work on a full-time or part-time basis on regularly scheduled shifts of a continuing nature;

  • Regular Premium means the amount exclusive of applicable taxes, if any, payable by the Policyholder at regular intervals during the Premium Paying Term, in amount and at the Premium Payment Frequency, both, as specified in the Schedule.

  • Defined Contribution Fraction means a fraction, the numerator of which is the sum of the Annual Additions to the Participant's Account under all the defined contribution plans (whether or not terminated) maintained by the Employer for the current and all prior Limitation Years (including the Annual Additions attributable to the Participant's nondeductible Voluntary Contributions to all defined benefit plans, whether or not terminated, maintained by the Employer and the Annual Additions attributable to all welfare benefit funds, as defined in section 419(e) of the Code, and individual medical benefit accounts as defined in section 415(l)(2) of the Code, and simplified employee pensions, maintained by the Employer) and the denominator of which is the sum of the Maximum Aggregate Amounts for the current and all prior Limitation Years of Service with the Employer (regardless of whether a defined contribution plan was maintained by the Employer). The Maximum Aggregate Amount in any Limitation Year is the lesser of one hundred twenty-five percent (125%) of the dollar limitation in effect under section 415(c)(1)(A) of the Code or thirty-five percent (35%) of the Participant's Compensation for such year. If the Employee was a Participant as of the end of the first day of the first Limitation Year beginning after December 31, 1986, in one or more defined contribution plans maintained by the Employer which were in existence on May 6, 1986, the numerator of this fraction will be adjusted if the sum of this fraction and the Defined Benefit Fraction would otherwise exceed one (1.0) under the terms of this Plan. Under the adjustment, an amount equal to the product of (A) the excess of the sum of the fractions over one (1.0) times (B) the denominator of this fraction, will be permanently subtracted from the numerator of this fraction. The adjustment is calculated as of the end of the last Limitation Year beginning before January 1, 1987, and disregarding any changes in the terms and conditions of the Plan made after May 5, 1986, but using the section 415 limitation applicable to the first Limitation Year beginning on or after January 1, 1987. The Annual Additions for any Limitation Year beginning before January 1, 1987 shall not be recomputed to treat all Employee contributions as Annual Additions.

  • Multiple employer welfare arrangement means a multiple employer welfare arrangement