Anti-dumping definition

Anti-dumping duty means an additional import duty imposed on imports dumped in Vietnam, which cause or threaten to cause material injury to a domestic industry.
Sample 1Sample 2
Anti-dumping. Not mentioned Countervailing Duties : Not mentioned Safeguards : Not mentioned Standards :Not mentioned Notes : SERVICES WTO Notification (GATS Art. V) : Date of notification : Consideration Process : Liberalization Approach : Modes Covered Specific Chapters on Specific Sectors Excluded Public Sectors carve-out : Most Favoured Nation : National Treatment : Market Access : Domestic Regulation : Subsidies covered by services disciplines : Denial of benefits for commercial presence : Notes : Link to schedules : INVESTMENT Scheduling Approach : Definition of investment : Most Favoured Nation : National Treatment : Fair and Equitable Treatment : Expropriation : Board of Directors and executive personnel : Invester - State arbitration : No Denial of Benefits : Additional BIT exists between the parties : No BIT list I : Status: BIT list II : Status: Notes : Link to schedules : TRADE FACILITATION Customs procedures : Yes Article 7 Customs valuation : No Trade regulations publication and administration : Yes Article 5 Use of ICT : No Mobility of business people : No Freedom of transit : Yes Article 8 Transport and logistics : No Trade finance : No OTHER AREAS Government Procurement : No Investment : No Competition Policy : Yes Article 6 Intellectual Property : No Dispute Settlement : Yes Article 13 Labor Mobility : No Labor and Environmental Standards : No Technical cooperation : No Institutional mechanism : Yes Article 14 Notes : RULES OF ORIGIN Cumulation Specific Process Heading Change De Minimis Minimum Content Drawback HTTP Link Notes :
Sample 1

Examples of Anti-dumping in a sentence

  • CHAPTER 3; Article 4: RVC 40%, and the final process of production is performed within a Party, or CTH Annex 2: Product Specific Rules Contingency Measures Anti - Dumping : CHAPTER 1; Article 3: as per WTO/GATT Countervailing Duties : CHAPTER 1; Article 3: as per WTO/GATT Safeguards : CHAPTER 7 Standards :CHAPTER 5: SPS, CHAPTER 6: TBT and Standards Notes : AANZFTA has been ratified by all FTA member countries since 11 November 2011.

  • Chapter 3; Article 29 (1) (c) ; RVC 40% and Change in tariff classification Annex 2: product specific rules Contingency Measures Anti - Dumping : Chapter 2; Article 20: Allwed as per WTO agreement Countervailing Duties : Chapter 2; Article 20: Allwed as per WTO agreement Safeguards : Chapter 2; Article 24: Bilateral safeguard is allowed.

  • Chapter 3; Article 26 RVC 40% or CTH Contingency Measures Anti - Dumping : Not mentioned Countervailing Duties : Not mentioned Safeguards : Article 20 ,21: BOP safeguard Standards :Chapter4: SPS, Chapter5: TBT Notes : SERVICES WTO Notification (GATS Art.

  • Article 1 Classification of which has thereby changed by at least one of the first four digits according to the Contingency Measures Anti - Dumping : Not mentioned Countervailing Duties : Not mentioned Safeguards : Article 3: Allwed; quantitative restrictions or measures Standards : Notes : SERVICES WTO Notification (GATS Art.

  • The Parties shall conciliate the detailed rules for origination of commodities in a separate document Contingency Measures Anti - Dumping : Not mentioned Countervailing Duties : Not mentioned Safeguards : Article 2: Allowed Standards :Not mentioned Notes : SERVICES WTO Notification (GATS Art.

  • Article 1 To be determined by Regulations on Establishing a Country of Origin Contingency Measures Anti - Dumping : Not mentioned Countervailing Duties : Not mentioned Safeguards : Article 3: Allowed; quantitative restrictions Standards :Not mentioned Notes : SERVICES WTO Notification (GATS Art.

  • Article 1 Detailed rules of origin of goods will be drawn up by the Sides through separate document, which will be the inherent part of the presnet Agreement Contingency Measures Anti - Dumping : Not mentioned Countervailing Duties : Not mentioned Safeguards : Article 3: Allowed; pre-defined cases such as BOP deficit.

  • Article IV the Governments of the two countries shall have annual consultations Contingency Measures Anti - Dumping : Not mentioned Countervailing Duties : Not mentioned Safeguards : Article VI: Allowed Standards :Not mentioned Notes : The 1995 agreement was renewed through an exchange of letters in 2005 until a new updated agreement enters into force.(See paragraph 15 of document here: xxxx://xxxxxxxx.xxx.xx/foreignrelation/bhutan.pdf) SERVICES WTO Notification (GATS Art.

  • Change of traiff classification and based on NZ-China FTA Product specific rules for majority of tariff lines Contingency Measures Anti - Dumping : According to WTO rules Countervailing Duties : According to WTO rules Safeguards : Retained.

Related to Anti-dumping

  • Dumping means a private enterprise resident outside of the RSA market its goods on own initiative in the RSA at lower prices than that of the Country of Origin and which have the potential to harm the local industries in the RSA.

  • Bumping or "Bump" shall mean:

  • Emission means a release of air contaminants into the ambient air.

  • Injection tool means a device used for controlled subsurface injection of radioactive tracer material.

  • Injection means the pressurized placement of septage waste below the surface of soil.

  • Seepage pit means an excavation deeper than it is wide that receives septic tank effluent and from which the effluent seeps from a structural internal void into the surrounding soil through the bottom and openings in the side of the pit.

  • Spill means the release of manure, manure contaminated runoff, or process wastewater from the confines of an animal feedlot, manure storage area, manure transfer system, or other component used to collect, transfer, or store manure, manure contaminated runoff, or process wastewater that if not recovered would pollute waters of the state. Spill includes releases from activities associated with land application that do not comply with this Permit.

  • Emitter means a drip irrigation emission device that delivers water slowly from the system to the soil.

  • Spillage means a security incident that results in the transfer of classified or other sensitive or sensitive but unclassified information to an information system that is not accredited, (i.e., authorized) for the applicable security level of the data or information.

  • Slow sand filtration means a process involving passage of raw water through a bed of sand at low velocity (generally less than 0.4 meters per hour) resulting in substantial particulate removal by physical and biological mechanisms.

  • Infiltration means water other than wastewater that enters a sewer system (including sewer system and foundation drains) from the ground through such means as defective pipes, pipe joints, connections, or manholes. Infiltration does not include, and is distinguished from, inflow.

  • Exfiltration means any unauthorized release of data from within an information system. This includes copying the data through covert network channels or the copying of data to unauthorized media.

  • Filtration means a process for removing particulate matter from water by passage through porous media.

  • Migration means, the right accorded to health insurance policyholders (including all members under family cover and members of group Health insurance policy), to transfer the credit gained for pre-existing conditions and time bound exclusions, with the same insurer

  • Transport means the most efficient and available method of conveyance. In all cases, where practical, economy fare will be utilized. If possible, the Insured’s Common Carrier tickets will be used.

  • Recycling means the series of activities by which materials that are no longer useful to the generator are collected, sorted, processed, and converted into raw materials and used in the production of new products. This definition excludes the use of these materials as a fuel substitute or for energy production.

  • toxic substances as defined by the Toxic Substances Control Act, as amended from time to time (“TSCA”), (4) “hazardous materials” as defined by the Hazardous Materials Transportation Act, as amended from time to time (“HMTA”), (5) asbestos, oil or other petroleum products, radioactive materials, urea formaldehyde foam insulation, radon gas and transformers or other equipment that contains dielectric fluid containing polychlorinated biphenyls and (6) any substance whose presence is detrimental or hazardous to health or the environment, including, without limitation, microbial or fungal matter or mold, or is otherwise regulated by federal, state and local environmental laws (including, without limitation, RCRA, CERCLA, TSCA, HMTA), rules, regulations and orders, regulating, relating to or imposing liability or standards of conduct concerning any Hazardous Materials or environmental, health or safety compliance (collectively, “Environmental Requirements”). As used in this Contract: “Release” means spilling, leaking, pumping, pouring, emitting, emptying, discharging, injecting, escaping, leaching, dumping or disposing.

  • Insecticide fogger means any insecticide product designed to release all or most of its content, as a fog or mist, into indoor areas during a single application.

  • inert waste means waste that—

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Slug means any discharge of water, sewage, or industrial waste which in concentration of any given constituent or in quantity of flow exceeds for any period of duration longer than fifteen (15) minutes more than five (5) times the average twenty-four (24) hour concentration or flows during normal operation.

  • Overflow means the intentional or unintentional diversion of flow from the collection and transport systems, including pumping facilities.

  • Incineration means an engineered process involving burning or combustion of solid waste to thermally degrade waste materials at high temperatures;

  • Flea and tick insecticide means any insecticide product that is designed for use against fleas, ticks, their larvae, or their eggs. “Flea and Tick Insecticide” does not include products that are designed to be used exclusively on humans or animals and their bedding.

  • Vaping means using an activated electronic delivery device or heated tobacco product.

  • Contaminants or "pollutants," or words of similar import, under any Environmental Law and (c) any other substance exposure to which is regulated under any Environmental Law.