Automotive HOKU MEA definition

Automotive HOKU MEA means the HOKU MEA that is developed by HOKU for use in automotive PEMFC, regardless of the date or source of development.
Sample 1Sample 2Sample 3

Examples of Automotive HOKU MEA in a sentence

  • In addition, HOKU may not sell or otherwise provide Automotive HOKU MEA to any automotive company if such Automotive HOKU MEA is identical in all respects to the Automotive HOKU MEA then being tested and evaluated by NISSAN pursuant to this Agreement.

  • HOKU agrees to further optimize Automotive HOKU MEA and Automotive HOKU MEA Assembly Process for integration into the NISSAN Fuel Cells.

  • In providing the Automotive HOKU MEA, HOKU CCM, HOKU Membrane and HOKU GDL to NISSAN, this transfer of materials constitutes a limited non-exclusive license to NISSAN to test and evaluate the Automotive HOKU MEA, HOKU CCM, HOKU Membrane and HOKU GDL as set forth in this Agreement.

  • The price per unit of Automotive HOKU MEA and HOKU Membrane shall be equal to the price quoted on Exhibit A for the equivalent unit and volume of Automotive HOKU MEA and HOKU Membrane, as applicable, which is produced during the applicable production timeframe referenced on Exhibit A.

  • Unless otherwise specified in accordance with Section 6.6 below, all Automotive HOKU MEA, HOKU Components, and HOKU Products produced pursuant to Section 6 above shall be delivered to the HOKU Facility for evaluation at the HOKU Facility to assess the progress towards meeting the Step 2 Cross-check Goals, pursuant to Section 4.2 above.

  • NISSAN may submit written purchase orders for the unit volume per each type of unit of Automotive HOKU MEA and HOKU Membrane that is listed in the column labeled “Unit Description” on Exhibit A, and HOKU shall produce the quantity of Automotive HOKU MEA and HOKU Membrane specified on the NISSAN purchase order.

  • HOKU and NISSAN are parties to that certain MEA Engineering Agreement dated as of September 1, 2004 (the “Engineering Agreement”) and that certain Membrane & MEA Purchase Agreement dated as of September 1, 2004 (the “Purchase Agreement”), pursuant to which HOKU optimized Automotive HOKU MEA and the Automotive HOKU MEA Assembly Process to meet NISSAN’s Step 1 Goals (as defined in the Engineering Agreement), and NISSAN purchased HOKU Membrane and HOKU MEA for test and evaluation.

  • All payments by NISSAN pursuant to this Section 7.3 shall be made to HOKU within sixty (60) days after delivery of an invoice for such additional quantities of Automotive HOKU MEA and HOKU Membrane.

  • Unless otherwise specified in accordance with Section 3.3 below, all Automotive HOKU MEA and HOKU Membrane produced pursuant to Section 3 above shall be delivered to the HOKU Facility for evaluation at the HOKU Facility to assess the progress towards meeting the Step 1 Goals pursuant to the Engineering Agreement.

  • HOKU agrees to optimize Automotive HOKU MEA and Automotive HOKU MEA Assembly Process for integration into the NISSAN Fuel Cells pursuant to the schedule and work plan attached as Exhibit A (the “Work Plan”).

Related to Automotive HOKU MEA

  • IOSCO means the International Organisation of Securities Commissions.

  • Electric bicycle means a “class 1 electric bicycle”, a “class 2 electric bicycle”, or a “class 3 electric bicycle” as defined in this section. (ORC 4511.01(RRR))

  • Alternative energy technology means equipment, component parts, materials, electronic devices, testing equipment, and related systems that are specifically designed, specifically fabricated, and used primarily for 1 or more of the following:

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • Low-solids coating means a coating containing 0.12 kilogram or less of solids per liter (one pound or less of solids per gallon) of coating material.

  • Automotive Wax, Polish, Sealant or Glaze means a product designed to seal out moisture, increase gloss, or otherwise enhance a motor vehicle’s painted surfaces. “Automotive Wax, Polish, Sealant or Glaze” includes, but is not limited to, products designed for use in autobody repair shops and “drive-through” car washes, as well as products designed for the general public. “Automotive Wax, Polish, Sealant or Glaze” does not include “Automotive Rubbing or Polishing Compounds”, automotive wash and wax products, surfactant-containing car wash products, and products designed for use on unpainted surfaces such as bare metal, chrome, glass, or plastic.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per million.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Plug-in Hybrid Electric Vehicle (PHEV) means a vehicle that is similar to a Hybrid but is equipped with a larger, more advanced battery that allows the vehicle to be plugged in and recharged in addition to refueling with gasoline. This larger battery allows the car to be driven on a combination of electric and gasoline fuels.

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.

  • Diagnostic source assembly means the tube housing assembly with a beam-limiting device attached.

  • electric line means any line which is used for carrying electricity for any purpose and includes:

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Heat input means the product (expressed in mmBtu/time) of the gross calorific value of the fuel (expressed in Btu/lb) and the fuel feed rate into the combustion device (expressed in mass of fuel/time) and does not include the heat derived from preheated combustion air, recirculated flue gases, or ex- haust from other sources.

  • Steel Products means products rolled, formed, shaped, drawn, extruded, forged, cast, fabricated or otherwise similarly processed, or processed by a combination of two or more or such operations, from steel made by the open heath, basic oxygen, electric furnace, Bessemer or other steel making process.

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • Specialty coating means a coating that, even though the coating meets the definition of a primer, topcoat, or self-priming topcoat, has additional performance criteria beyond those of primers, topcoats, and self-priming topcoats for specific applications. These performance criteria may include, but are not limited to, temperature or fire resistance, substrate compatibility, antireflection, temporary protection or marking, sealing, adhesively joining substrates, or enhanced corrosion protection. A listing of specialty coatings is found in paragraph (D)(1)(b) of rule 3745-21-19 of the Administrative Code.

  • Plug-in hybrid electric vehicle means a motor vehicle that:

  • Semiconductor cleanrooms means the integrated systems, fixtures, piping, partitions, flooring,

  • Stinger-steered automobile or watercraft transporter means an automobile or watercraft transporter

  • Semiconductor equipment means (i) machinery or tools or repair parts or replacements thereof; (ii)

  • Furniture coating means any paint designed for application to room furnishings including, but not limited to, cabinets (kitchen, bath and vanity), tables, chairs, beds, and sofas.

  • Fabrication means making up data or results and recording or reporting them.

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.