Bone densitometry definition

Bone densitometry means a noninvasive measurement of certain physical characteristics of bone that reflect bone strength. Test results are typically reported as bone mineral content or density and are used for diagnosing osteoporosis, estimating fracture risk, and monitoring changes in bone mineral content.
Sample 1Sample 2Sample 3
Bone densitometry means the art and science of applying ionizing radiation to the human body using a dual energy X-ray absorptiometry unit for the sole purpose of measuring bone density.
Sample 1Sample 2Sample 3
Bone densitometry means the quantitative assessment of bone mass using single or dual energy X-ray absorptiometry.
Sample 1Sample 2Sample 3

Examples of Bone densitometry in a sentence

  • Bone densitometry in the diagnosis of vertebral fractures in children: accuracy of vertebral fracture assessment.

  • Bone densitometry: the best way to detect osteoporosis and to monitor therapy.

  • Bone densitometry equipment ultrasound/x-ray based with color printer.( enclose a scanned copy of Supporting Document)Room size 14’X14 feet.

  • Bone densitometry as an indicator of percentage tibia ash in broiler chicks fed varying dietary calcium and phosphorus levels.

  • Bone densitometry equipment ultrasound/x-ray based with color printer.( enclose a scanned copy of Supporting Document)-- Room size 14’X14 feet.- Separate waiting area.- Qualified Radiologist with at least 3 years experience after postgraduate qualification.Qualified Radiographer from recognized institution.

  • Bone densitometry was regularly performed in 75% of teams, but never performed in 19%.

  • Bone densitometry is a niche technology not widely distributed in practices in Australia and because of the restrictions on its use under Medicare, it is relatively infrequently used.

  • If your pump pumps more water than arrives into the filter, the drum will be pumped empty and the sensor will appear above the water level, which will cause the filter to go in rinse cycle.If the supply pipes are of significant length, with many curves, there will be lots of friction loss and a lot less than 10 m3/hour may be supplied per pipe.Entries that are not used should be sealed.

  • Prodigy Bone densitometry (GE Lunar, Madison, WI) was used to measure whole body FFM, consisting of lean mass and bone mineral content (BMC), and FM.Subjects lay on the table while the scanner arm passes over them in a rectilinear manner.

  • Bone densitometry of the spine and femur in children by dual-energy x-ray absorpti- ometry.


More Definitions of Bone densitometry

Bone densitometry means a process for measuring bone mineral density by utilization of single x-ray absorptiometry (SXA), dual x-ray absorptiometry (DXA) or other technology that is substantially equivalent as determined by the board.
Sample 1Sample 2Sample 3
Bone densitometry means a noninvasive measurement of certain physical characteristics of
Sample 1Sample 2Sample 3
Bone densitometry means the determination of bone mass by means of radiation
Sample 1
Bone densitometry means the science and art of applying x-radiation to human beings for determination of site specific bone density.
Sample 1
Bone densitometry means a noninvasive measurement of certain physical
Sample 1

Related to Bone densitometry

  • manoeuvring area means that part of an aerodrome to be used for the take-off, landing and taxiing of aircraft, excluding aprons;

  • Gasohol means a blended fuel composed of gasoline and fuel grade ethanol.

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • HEPA filter means high-efficiency particulate air filters that are rated to achieve a minimum initial particle-removal efficiency of 99.97 per cent using ASTM F 1471– 93 or equivalent standard;

  • Air-purifying respirator means a respirator with an air-purifying filter, cartridge, or canister that removes specific air contaminants by passing ambient air through the air-purifying element.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Fluoroscopy means a technique for generating x-ray images and presenting them simultaneously and continuously as visible images. This term has the same meaning as the term "radioscopy" in the standards of the International Electrotechnical Commission.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR Part 82 subpart G with supplemental tables of alternatives available at (http://www.epa.gov/snap/).

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Weathertight means that in any sea conditions water will not penetrate into the ship.

  • Hydraulic fracturing means the fracturing of underground rock formations, including shale and non-shale formations, by manmade fluid-driven techniques for the purpose of stimulating oil, natural gas, or other subsurface hydrocarbon production.

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Polystyrene foam means blown polystyrene and expanded and

  • Crawling bug insecticide means any insecticide product that is designed for use against ants, cockroaches, or other household crawling arthropods, including, but not limited to, mites, silverfish or spiders. “Crawling Bug Insecticide” does not include products designed to be used exclusively on humans or animals, or any house dust mite product. For the purposes of this definition only:

  • COVID-19 symptoms means fever of 100.4 degrees Fahrenheit or higher, chills, cough, shortness of breath or difficulty breathing, fatigue, muscle or body aches, headache, new loss of taste or smell, sore throat, congestion or runny nose, nausea or vomiting, or diarrhea, unless a licensed health care professional determines the person’s symptoms were caused by a known condition other than COVID-19.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Tomographic plane means that geometric plane which is identified as corresponding to the output tomogram.

  • Manual brachytherapy means a type of brachytherapy in which the brachytherapy sources (e.g., seeds, ribbons) are manually placed topically on or inserted either into the body cavities that are in close proximity to a treatment site or directly into the tissue volume.

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Anaerobic digester means a liquid manure storage area that is constructed with the intent to capture and combust gas emissions resulting from the digestion of waste by microbes in anaerobic conditions. An anaerobic digester is a LMSA and is required to comply with all requirements applicable to LMSAs. Requirements specific to anaerobic digesters will be noted when applicable.

  • Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.

  • Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Common Channel Signaling (CCS) means an out-of-band, packet-switched, signaling network used to transport supervision signals, control signals, and data messages. It is a special network, fully separate from the transmission path of the public switched network. Unless otherwise agreed by the Parties, the CCS protocol used by the Parties shall be SS7.