Building Envelope Plan definition

Building Envelope Plan means the plans which are attached to this MCP and which shows the Approved Building Envelopes and other related matters for the Lots within the Plan.
Sample 1Sample 2Sample 3
Building Envelope Plan means a building envelope plan shown on the plan of subdivision that includes the restriction that incorporates this MCP. The Building Envelope Plan forms part of the Approved Building Envelope, prepared for the purposes of Regulation 406.
Sample 1

Examples of Building Envelope Plan in a sentence

  • Any Dwelling on a Dual Frontage Lot need not be set back from its Rear Boundary, unless otherwise stated in the Building Envelope Plan.

  • Where there is more than one road which adjoins a lot or where it may be otherwise unclear, the Front Street may be identified by the letter “F” in the Building Envelope Plan or will be as agreed in writing by the DAP.

  • The siting of a Building within the Endorsed Building Envelope Plan may be subject to any further restriction or modification imposed by this MCP or any other applicable Control.

  • A two-storey dwelling must be constructed upon any Lot that is identified on the Endorsed Building Envelope Plan as being a Lot upon which a two-storey residence is required, unless Lendlease, in its absolute discretion, approves in writing otherwise.

  • Where a TPZ is located wholly or partially within an allotment it is indicated on the Building Envelope Plan.

  • Where the Developer is providing fencing it will be indicated on the Building Envelope Plan.

  • A Building (other than a boundary fence) on any Lot with a Height above the Finished Surface Level of greater than 1.8 metres and for which the construction requires a Building Permit must be sited within and in accordance with the Endorsed Building Envelope Plan.

  • Build or cause to be built or allow to be built or allow to remain standing any buildings constructed on a lot containing a building envelope that does not conform to the relevant building envelope as shown in the attached Building Envelope Plan.

  • The driveway should be positioned in accordance with the Building Envelope Plan (if indicated).Locate your driveway to enable safe access to your property, taking into account the slopeof your site.

  • The foregoing restriction shall not apply during any period that the lot is being used as a display home, or any lot that is identified within the Building Envelope Plan as not applying to.

Related to Building Envelope Plan

  • Building Envelope means the integrated elements of a building which separate its interior from the outdoor environment;

  • Building Project means the aggregate combined parcel of land on a portion of which are the improvements of which the Premises form a part, with all the improvements thereon, said improvements being a part of the block and lot for tax purposes which are applicable to the aforesaid land.

  • Building Systems The mechanical, electrical, plumbing, sanitary, sprinkler, heating, ventilation and air conditioning (“HVAC”), security, life-safety, elevator and other service systems or facilities of the Building up to the point of connection of localized distribution to the Premises.

  • Building Common Areas means with respect to the Tower, the areas, facilities and amenities specified in Schedule [E] which are to be used and enjoyed in common with all the other Apartment Acquirers of the Units in the Building; and

  • Building Drain means that part of the lowest horizontal piping of a drainage system which receives the discharge from soil, waste, and other drainage pipes inside the walls of the building and conveys it to the building sewer, beginning five (5) feet (1.5 meters) outside the inner face of the building wall.

  • Building means any structure used or intended for supporting or sheltering any use or occupancy;

  • Building sewer means the extension from the building drain to the public sewer or other place of disposal.

  • residential premises means a house, building, structure, shelter, or mobile home, or portion thereof, used as a dwelling, home, residence, or living place by 1 or more human beings. “Residential premises” includes an apartment unit, a boardinghouse, a rooming house, a mobile home, a mobile home space, and a single or multiple family dwelling, but does not include a hotel, a motel, motor home, or other tourist accommodation, when used as a temporary accommodation for guests or tourists, or premises used as the principal place of residence of the owner and rented occasionally during temporary absences including vacation or sabbatical leave.

  • apartment building means a residential use building, or the residential use portion of a mixed-use building, other than a townhouse or stacked townhouse containing four or more dwelling units each of which shall have access to above grade common halls, stairs, elevators, and yards;

  • Heritage Building means a Building designated under Part IV of the Ontario Heritage Act, R.S.O. 1990, c. O.18, or any successor legislation, or a Building designated under Part V of the Ontario Heritage Act,R.S.O. 1990, c. O.18, or any successor legislation, which has been identified as a significant heritage resource in a conservation district plan and any Building listed in the Markham Register of Property of Cultural Heritage Value of Interest;

  • Numbering Plan Area (NPA) , also called area code, means the three (3)-digit code that occupies the A, B, C positions in the ten (10)-digit NANP format that applies throughout the NANP Area. NPAs are of the form NXX, where N represents the digits two (2) through nine (9) and X represents any digit zero (0) through nine (9). In the NANP, NPAs are classified as either geographic or non-geographic. Geographic NPAs are NPAs which correspond to discrete geographic areas within the NANP Area. Non-geographic NPAs are NPAs that do not correspond to discrete geographic areas, but which are instead assigned for services with attributes, functionalities, or requirements that transcend specific geographic boundaries. For example, NPAs in the N00 format, (e.g., 800, 900) are non- geographic.

  • Adopt a comprehensive land use plan means to enact a new

  • Office of the Interconnection Control Center means the equipment, facilities and personnel used by the Office of the Interconnection to coordinate and direct the operation of the PJM Region and to administer the PJM Interchange Energy Market, including facilities and equipment used to communicate and coordinate with the Market Participants in connection with transactions in the PJM Interchange Energy Market or the operation of the PJM Region. On-Site Generators:

  • Base Building shall include the structural portions of the Building, the public restrooms and the Building mechanical, electrical and plumbing systems and equipment located in the internal core of the Building on the floor or floors on which the Premises are located. Tenant shall promptly provide Landlord with copies of any notices it receives regarding an alleged violation of Law. Tenant shall comply with the rules and regulations of the Building attached as Exhibit E and such other reasonable rules and regulations adopted by Landlord from time to time, including rules and regulations for the performance of Alterations (defined in Section 9).