C1 tyres definition

C1 tyres. , ‘C2 tyres’ and ‘C3 tyres’ means tyres belonging to the respective classes set out in Article 8(1) of Regulation (EC) No 661/2009;
Sample 1Sample 2Sample 3
C1 tyres. , ‘C2 tyres’ and ‘C3 tyres’ means tyres belonging to the respective classes set out
Sample 1

Examples of C1 tyres in a sentence

  • In the case of vehicles of categories M1 and N1, which are designed to be capable of towing a trailer, the additional load imposed at the trailer coupling device may cause the rear tyre maximum load ratings to be exceeded in case of class C1 tyres, but not by more than 15 per cent.

  • All C1 tyres shall meet the wet grip requirements contained in Part A of Annex II.

  • A list of tyre size designations covered by this application and specifying for each brand name/trademark and/or each trade description/commercial name the applicable tyre size designations and service descriptions, adding in case of Class C1 tyres whether "reinforced" (or "extra load") or not.

  • For Class C1 tyres, the rolling sound emission value shall not exceed the values pertinent to the applicable stage given below.

  • This Regulation applies to C1 tyres, C2 tyres and C3 tyres that are placed on the market.

  • In the case of vehicles which are designed to be capable of towing a trailer, the additional load imposed at the trailer coupling device may cause the rear tyre maximum load ratings to be exceeded in case of class C1 tyres, but not by more than 15 per cent.

  • C1 tyres are used typically for passenger cars, C2 tyres for light commercial vehicles (LCVs) and C3 tyres for heavy commercial vehicles (HCVs).

  • In the C2 and C3 categories; for which the FEHRL study had offered considerably less data than for C1 tyres, the SP data suggested that the 5.5-6.5 db(A) reductions proposed by the FEHRL study might be over-ambitious.

  • For passenger car tyre rims (C1 tyres), the test rim width shall be the same as the measuring rim determined in ISO 4000-1: 2010 clause 6.2.2.

  • The market share of these tyres at EU level is at the level of 30% of the annual C1 tyres sales for snow tyres and around 1% for ice tyres according to the review study.

Related to C1 tyres

  • Polystyrene foam means blown polystyrene and expanded and

  • Sedimentation means a process for removal of solids before filtration by gravity or separation.

  • Soft drinks means nonalcoholic beverages that contain natural or artificial sweeteners. "Soft drinks" does not include beverages that contain milk or milk products, soy, rice, or similar milk substitutes, or that contains greater than fifty per cent vegetable or fruit juice by volume.

  • Open type traction battery means a liquid type battery requiring refilling with water and generating hydrogen gas released to the atmosphere.

  • Expanded polystyrene means blown polystyrene and expanded

  • M2M Flowgate means Flowgates where constraints are jointly monitored and coordinated as defined and set forth in Schedule D to this Agreement.

  • PAD means a Preauthorized Debit.

  • Flowgate means a representative modeling of facilities or groups of facilities that may act as potential constraint points.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • business vertical means a distinguishable component of an enterprise that is engaged in the supply of individual goods or services or a group of related goods or services which is subject to risks and returns that are different from those of the other business verticals.

  • Roomer means a person occupying a dwelling unit that lacks a major bathroom or kitchen facility, in a structure where one or more major facilities are used in common by occupants of the dwelling unit and other dwelling units. Major facility in the case of a bathroom means toilet, or either a bath or shower, and in the case of a kitchen means refrigerator, stove or sink.

  • Double Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in two or more distinct phases that requires the product container be shaken before use to mix the phases, producing an emulsion.

  • Seaplane means an aeroplane capable normally of taking off from and alighting solely on water;

  • Filtering facepiece (dust mask) means a negative pressure particulate respirator with a filter as an integral part of the facepiece or with the entire facepiece composed of the filtering medium, not equipped with elastomeric sealing surfaces and adjustable straps.

  • GAC20 means granular activated carbon filter beds with an empty-bed contact time of 20 minutes based on average daily flow and a carbon reactivation frequency of every 240 days.

  • Soil texture means proportion by weight of sand, silt, and clay in a soil.

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Ambient air means that portion of the atmosphere, external to buildings, to which the general public has access.

  • Cold Weather Alert means the notice that PJM provides to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for expected extreme cold weather conditions.