Capacity Demonstration Factor definition

Capacity Demonstration Factor is determined in Section 3 of Exhibit C.
Sample 1Sample 2Sample 3
Capacity Demonstration Factor has the meaning set forth in EXHIBIT K.
Sample 1

Examples of Capacity Demonstration Factor in a sentence

  • In order to pass the 20-Day Demonstration, the Generating Facility must achieve a Capacity Demonstration Factor of greater than or equal to 0.95.

  • The Capacity Demonstration Factor is calculated as follows: CAPACITY DEMONSTRATION FACTOR = A / (B x C) Where A = The number of Capacity Measurement Intervals during the test period when the Demonstration Rate of Metered Energy equals or exceeds the Firm Contract Capacity specified in Section 1.02(d).

  • The Capacity Demonstration Factor is calculated as follows: CAPACITY DEMONSTRATION FACTOR = A / (B x C) Where A = The number of Capacity Measurement Intervals during the test period when the Power Output equals or exceeds the Firm Contract Capacity specified in Section 1.02(d).

Related to Capacity Demonstration Factor

  • Capacity Utilization Factor or “CUF” shall have the same meaning as provided in CERC (Terms and Conditions for Tariff determination from Renewable Energy Sources) Regulations, 2009 as amended from time to time; However, for avoidance of any doubt, it is clarified that the CUF shall be calculated on the Contracted Capacity; In any Contract Year, if ‘X’ MWh of energy has been metered out at the Delivery Point for ‘Y’ MW Project capacity, CUF= (X MWh/(Y MW*8766)) X100%; Declared CUF for this Project shall be % (to be revised as applicable).

  • Capacity factor means the ratio of the average load on a machine or equipment for the period of time considered to the capacity rating of the machine or equipment.

  • Leverage Factor means the leverage factor in respect of a Series of ETP Securities as specified in the relevant Final Terms.

  • Load Factor means the percentage of aircraft seats actually occupied on a flight (RPMs divided by ASMs). “NMB” means the National Mediation Board.

  • Stress Factor means 2.25.

  • Available RP Capacity Amount means (i) the amount of Restricted Payments that may be made at the time of determination pursuant to Sections 7.06(d), (g), (h) and (l) minus (ii) the sum of the amount of the Available RP Capacity Amount utilized by the Borrower or any Restricted Subsidiary to (A) make Restricted Payments in reliance on Sections 7.06 (g), (h) or (l), (B) incur Liens pursuant to Section 7.01(bb), (C) make Investments pursuant to Section 7.02(n), (D) incur Indebtedness pursuant to Section 7.03(y) and (E) make prepayments, redemptions, purchases, defeasances and other payments in respect of Junior Financings prior to their scheduled maturity utilizing the Available RP Capacity Amount pursuant to Section 7.13 plus (iii) the aggregate principal amount of Indebtedness prepaid prior to or substantially concurrently at such time, solely to the extent such Indebtedness (A) was secured by Liens pursuant to Section 7.01(bb) or (B) was incurred pursuant to Section 7.03(y) and not secured pursuant to Section 7.01(bb) (it being understood that the amount under this clause (iii) shall only be available for use under Sections 7.01(bb) and/or 7.03(y), as applicable).

  • Inflation Factor means a number determined for each tax year by dividing the consumer price index for June of the tax year by the consumer price index for June 2005.

  • Base Capacity Demand Resource Price Decrement means, for the 2018/2019 and 2019/2020 Delivery Years, a difference between the clearing price for Base Capacity Demand Resources and Base Capacity Energy Efficiency Resources and the clearing price for Base Capacity Resources and Capacity Performance Resources, representing the cost to procure additional Base Capacity Resources or Capacity Performance Resources out of merit order when the Base Capacity Demand Resource Constraint is binding.

  • Planned Financed Generation Capacity Resource means a Planned Generation Capacity Resource that, prior to August 7, 2015, has an effective Interconnection Service Agreement and has submitted to the Office of the Interconnection the appropriate certification attesting achievement of Financial Close.

  • Power Factor means the ratio of usage power measured in kW to total power measured in kVA;

  • Limited Indexation Factor means, in respect of a Limited Indexation Month or Limited Indexation Date, as the case may be, the ratio of the Index Figure applicable to that month or date, as the case may be, divided by the Index Figure applicable to the month or date, as the case may be, twelve months prior thereto, provided that (a) if such ratio is greater than the Maximum Indexation Factor specified in the relevant Final Terms, it shall be deemed to be equal to such Maximum Indexation Factor and (b) if such ratio is less than the Minimum Indexation Factor specified in the relevant Final Terms, it shall be deemed to be equal to such Minimum Indexation Factor;

  • Expansion Factor has the meaning ascribed thereto in Section 2.3(a);

  • Normal Minimum Generation means the lowest output level of a generating resource under normal operating conditions.

  • Loss Factor means the scaling factor determined in accordance with clause 7 and applied by the reconciliation manager to volumes of electricity measured or estimated in respect of ICPs on the Network, in order to reflect the impact of the ICP on Losses within the Network;

  • Lowest achievable emission rate (LAER) means for any source, that rate of emissions which reflects the most stringent emission limitation which is contained in the implementation plan of any State for such class or category of source, unless the owner or operator of the proposed source demonstrates that such limitations are not achievable, or the most stringent emission limitation which is achieved in practice by such class or category of source, whichever is more stringent. In no event shall the application of this term permit a proposed new or modified source to emit any pollutant in excess of the amount allowable under applicable New Source Standards of Performance.

  • Applicable Multiplier means, with respect to any Rate Period for any Series of RVMTP Shares, the percentage set forth opposite the applicable credit rating most recently assigned to such Series by the Rating Agency in the table below on the Rate Determination Date for such Rate Period: *And/or the equivalent ratings of any other Rating Agency then rating the RVMTP Shares utilizing the highest of the ratings of the Rating Agencies then rating the RVMTP Shares.

  • Annual Specified Amount means $400,000 escalated on each Anniversary Date by the percentage by which the CPI last published prior to such Anniversary Date has increased over the CPI last published prior to the grant of the Burswood Casino Licence.

  • Monthly Uptime Percentage means total number of minutes in a calendar month minus the number of minutes of Downtime suffered in a calendar month, divided by the total number of minutes in a calendar month.

  • Lowest Achievable Emission Rate (LAER) means, for any source, the more stringent rate of emissions based on the following:

  • Base Capacity Resource Price Decrement means, for the 2018/2019 and 2019/2020 Delivery Years, a difference between the clearing price for Base Capacity Resources and the clearing price for Capacity Performance Resources, representing the cost to procure additional Capacity Performance Resources out of merit order when the Base Capacity Resource Constraint is binding.

  • Weighting factor wT for an organ or tissue (T) means the proportion of the risk of stochastic effects resulting from irradiation of that organ or tissue to the total risk of stochastic effects when the whole body is irradiated uniformly. For calculating the effective dose equivalent, the values of wT are:

  • Required Accumulation Factor Number shall be equal to a fraction, rounded upwards to the nearest whole number, the numerator of which is one and the denominator of which is equal to the lowest monthly principal payment rate on the Accounts, expressed as a decimal, for the three months preceding the date of such calculation.

  • Required Reserve Factor Floor means, for any Calculation Period, the sum (expressed as a percentage) of (a) 28.00% plus (b) the product of the Adjusted Dilution Ratio and the Dilution Horizon Ratio, in each case, as of the immediately preceding Cut-Off Date.

  • Participation Factor means a percentage to be determined in the reasonable discretion of the Issuer (billiges Ermessen) (§ 315 BGB) on the Strike Date on the basis of the volatility of the Underlying and the market conditions prevailing on such date and will be published in accordance with § 14 hereof. The indication for the Participation Factor based on the market conditions as of 15 November 2017 is 100% (in any case, it will not be below 80%).

  • Generator Forced Outage means an immediate reduction in output or capacity or removal from service, in whole or in part, of a generating unit by reason of an Emergency or threatened Emergency, unanticipated failure, or other cause beyond the control of the owner or operator of the facility, as specified in the relevant portions of the PJM Manuals. A reduction in output or removal from service of a generating unit in response to changes in market conditions shall not constitute a Generator Forced Outage.

  • Monthly Minimum Removal Efficiency means the minimum reduction in the pollutant parameter specified when the effluent average monthly concentration for that parameter is compared to the influent average monthly concentration.