Capital Resources Requirement definition

Capital Resources Requirement and “Overall Financial Adequacy Rule” have the respective meanings given to such terms in the Applicable Banking Regulations and shall include any successor terms from time to time equivalent thereto as agreed between the Company and the Trustee.
Sample 1Sample 2Sample 3
Capital Resources Requirement has the meaning given it in the Financial Rules;
Sample 1Sample 2Sample 3
Capital Resources Requirement and “Overall Financial Adequacy Rule” have the respective meanings given to such terms in the Capital Regulations and shall include any successor terms from time to time equivalent thereto as agreed between the Company and the Trustee.
Sample 1Sample 2Sample 3

Examples of Capital Resources Requirement in a sentence

  • The department will measure Sanitary Manhole (Size) by each individual unit, acceptably completed.

  • The calculation of the Capital Resources Requirement under the Financial Holding Company test compares the Capital Resources of Tullett Prebon plc with the Capital Resources Requirement of all its subsidiaries.

  • This primarily monitors the relationship of Capital Resources Requirement (measured as 8 % of risk-weighted assets) to available capital resources.

  • The FSA sets ICG for each UK bank calibrated by references to its Capital Resources Requirement, broadly equivalent to 8 percent of risk weighted assets and thus representing the capital required under Pillar 1 of the Basel II framework.

  • Capital Resources Requirement For full scope IFPRU investment firms, the minimum capital resource requirement will be calculated as the higher of the base requirement or the sum of the credit, market and operational risk requirements.

  • The PRA sets ICG for each UK bank calibrated by reference to its Capital Resources Requirement, broadly equivalent to 8 percent of risk weighted assets and thus representing the capital required under Pillar 1 of the Basel III framework.

  • The Bank (A) shall give a Deferral Notice in circumstances where its Capital Resources (as defined in Condition 5(e) below) would be less than its Capital Resources Requirement (as defined in Condition 5(e) below) after payment of any such principal or interest in whole or in part and (B) may give a Deferral Notice where the FSA has required or requested the Bank to defer payment of the relevant Deferral Payment.

  • In the case of Dated Subordinated Notes which constitute Upper Tier 3 Capital, the FSA only permits payments of principal and interest to be made in respect of such Dated Subordinated Notes in circumstances where, after such payment is made, the Bank’s Capital Resources would not be less than its Capital Resources Requirement.

  • The FCA requires all mortgage provision companies to maintain Capital Resources (CR) in excess of their Capital Resources Requirement (CRR).

  • The Basel III text will be implemented in Europe via the Capital Resources Requirement and Capital Requirements Directive.


More Definitions of Capital Resources Requirement

Capital Resources Requirement has the meaning given in the FSA Rules;
Sample 1Sample 2
Capital Resources Requirement means the base capital resources requirement as defined in Section 2.1.45 of the GENPRU together with the base capital resources requirement as defined in Section 2.1.48 of the GENPRU;
Sample 1Sample 2
Capital Resources Requirement has the meaning given in the FSA Rules; Circular means the shareholder circular to be published in connection with the Rights Issue and the Share Capital Subdivision, including the notice convening the GM; Citi means Citigroup Global Markets U.K. Equity Limited;
Sample 1

Related to Capital Resources Requirement

  • Minimum Annual Resource Requirement means, for Delivery Years through May 31, 2017, the minimum amount of capacity that PJM will seek to procure from Annual Resources for the PJM Region and for each Locational Deliverability Area for which the Office of the Interconnection is required under Tariff, Attachment DD, section 5.10(a) to establish a separate VRR Curve for such Delivery Year. For the PJM Region, the Minimum Annual Resource Requirement shall be equal to the RTO Reliability Requirement minus [the Sub-Annual Resource Reliability Target for the RTO in Unforced Capacity]. For an LDA, the Minimum Annual Resource Requirement shall be equal to the LDA Reliability Requirement minus [the LDA CETL] minus [the Sub-Annual Resource Reliability Target for such LDA in Unforced Capacity]. The LDA CETL may be adjusted pro rata for the amount of load served under the FRR Alternative.

  • Annual Resource means a Generation Capacity Resource, an Annual Energy Efficiency Resource or an Annual Demand Resource.

  • Annual Resource Price Adder means, for Delivery Years starting June 1, 2014 and ending May 31, 2017, an addition to the marginal value of Unforced Capacity and the Extended Summer Resource Price Adder as necessary to reflect the price of Annual Resources required to meet the applicable Minimum Annual Resource Requirement.

  • economic resources means assets of every kind, whether tangible or intangible, movable or immovable, which are not funds, but may be used to obtain funds, goods or services;

  • Cultural resources means archaeological and historic sites and artifacts, and traditional religious, ceremonial and social uses and activities of affected Indian tribes.

  • Comprehensive resource analysis means an analysis including,

  • freezing of economic resources means preventing the use of economic resources to obtain funds, goods or services in any way, including, but not limited to, by selling, hiring or mortgaging them;

  • CAISO Global Resource ID means the number or name assigned by the CAISO to the CAISO- Approved Meter.

  • Total resource cost test or "TRC test" means a standard that is met if, for an investment in energy efficiency or demand-response measures, the benefit-cost ratio is greater than one. The benefit-cost ratio is the ratio of the net present value of the total benefits of the program to the net present value of the total costs as calculated over the lifetime of the measures. A total resource cost test compares the sum of avoided electric utility costs, representing the benefits that accrue to the system and the participant in the delivery of those efficiency measures, as well as other quantifiable societal benefits, including avoided natural gas utility costs, to the sum of all incremental costs of end-use measures that are implemented due to the program (including both utility and participant contributions), plus costs to administer, deliver, and evaluate each demand-side program, to quantify the net savings obtained by substituting the demand-side program for supply resources. In calculating avoided costs of power and energy that an electric utility would otherwise have had to acquire, reasonable estimates shall be included of financial costs likely to be imposed by future regulations and legislation on emissions of greenhouse gases.

  • Individual Resource Status: Single Dwelling Contributing 1 Total: 1 Individual Resource Status: Shed Contributing 1 Total: 1 Primary Resource Information: Single Dwelling, Stories 1.00, Style: Queen Anne, ca 1895 February 2007: This Queen Anne style house has aluminum siding on a wood frame. The foundation is not visible. There is a 1 story 3 bay porch with turned wooden posts. The windows are 1/1 double hung vinyl. The roof is an aluminum false mansard. 2313 T Street, 2315 T Street, 2317 T Street, and 2319 T Street comprise a series of houses built on the same design, nearly identical to those found around the corner in the 1300 block of 24th Street. The design is two bays, one story, frame, with a false mansard roof. All four retain original Queen Anne style lathe-turned porch posts. All but 2313 have original wood sash 1/1 windows, while 2313 has vinyl replacements. 2319 has Inselstone siding, and 2313 has aluminum siding, while the two center houses (2315 and 2317) appear to have recently been restored to their original wood siding, which is double covelap. The original pressed metal shingles are still in place in the false mansard of 2319, while the mansard at 2313 has siding over the mansard; the two houses in between (2315 and 2317) have some kind of slate or wood shingle that has been painted in the mansards.

  • Environmentally-Limited Resource means a resource which has a limit on its run hours imposed by a federal, state, or other governmental agency that will significantly limit its availability, on either a temporary or long-term basis. This includes a resource that is limited by a governmental authority to operating only during declared PJM capacity emergencies.

  • Locational Deliverability Area Reliability Requirement means the projected internal capacity in the Locational Deliverability Area plus the Capacity Emergency Transfer Objective for the Delivery Year, as determined by the Office of the Interconnection in connection with preparation of the Regional Transmission Expansion Plan, less the minimum internal resources required for all FRR Entities in such Locational Deliverability Area.

  • Geothermal resources shall collectively mean the matter, substances and resources defined in subparagraph 21(a) that are not subject to this Lease but are located on adjacent land or lands in reasonable proximity thereto;

  • Natural resources means all land, fish, shellfish, wildlife, biota,

  • Management Plan means a plan to manage the activities and protect the special value or values in an Antarctic Specially Protected Area or an Antarctic Specially Managed Area.

  • Measured Mineral Resource means that part of a Mineral Resource for which quantity, grade or quality, densities, shape, and physical characteristics are so well established that they can be estimated with confidence sufficient to allow the appropriate application of technical and economic parameters, to support production planning and evaluation of the economic viability of the deposit. The estimate is based on detailed and reliable exploration, sampling and testing information gathered through appropriate techniques from locations such as outcrops, trenches, pits, workings and drill holes that are spaced closely enough to confirm both geological and grade continuity.

  • Historic resource means a publicly or privately owned historic building, structure, site, object, feature, or open space located within an historic district designated by the national register of historic places, the state register of historic sites, or a local unit acting under the local historic districts act, 1970 PA 169, MCL 399.201 to 399.215, or that is individually listed on the state register of historic sites or national register of historic places, and includes all of the following:

  • Renewable Resources means one of the following sources of energy: solar, wind, tidal, geothermal, biomass, hydroelectric facilities or digester gas.

  • Genetic resources means genetic material of actual or potential value;

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • PJM Region Reliability Requirement means, for purposes of the Base Residual Auction, the Forecast Pool Requirement multiplied by the Preliminary PJM Region Peak Load Forecast, less the sum of all Preliminary Unforced Capacity Obligations of FRR Entities in the PJM Region; and, for purposes of the Incremental Auctions, the Forecast Pool Requirement multiplied by the updated PJM Region Peak Load Forecast, less the sum of all updated Unforced Capacity Obligations of FRR Entities in the PJM Region.

  • Inferred Mineral Resource means that part of a mineral resource for which quantity and grade or quality can be estimated on the basis of geological evidence and limited sampling and reasonably assumed, but not verified, geological and grade continuity. The estimate is based on limited information and sampling gathered through appropriate techniques from locations such as outcrops, trenches, pits, workings and drill holes.

  • Base Load Generation Resource means a Generation Capacity Resource that operates at least 90 percent of the hours that it is available to operate, as determined by the Office of the Interconnection in accordance with the PJM Manuals.

  • Compliance Plan means the compliance obligations, program, and procedures described in this Consent Decree at paragraph 13.

  • Public resources means water, fish, and wildlife and in addition means capital improvements of the state or its political subdivisions.

  • Limited Demand Resource Reliability Target for the PJM Region or an LDA, shall mean the maximum amount of Limited Demand Resources determined by PJM to be consistent with the maintenance of reliability, stated in Unforced Capacity that shall be used to calculate the Minimum Extended Summer Demand Resource Requirement for Delivery Years through May 31, 2017 and the Limited Resource Constraint for the 2017/2018 and 2018/2019 Delivery Years for the PJM Region or such LDA. As more fully set forth in the PJM Manuals, PJM calculates the Limited Demand Resource Reliability Target by first: i) testing the effects of the ten- interruption requirement by comparing possible loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using the cumulative capacity distributions employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) more than ten times over those peak days; ii) testing the six-hour duration requirement by calculating the MW difference between the highest hourly unrestricted peak load and seventh highest hourly unrestricted peak load on certain high peak load days (e.g., the annual peak, loads above the weather normalized peak, or days where load management was called) in recent years, then dividing those loads by the forecast peak for those years and averaging the result; and (iii) (for the 2016/2017 and 2017/2018 Delivery Years) testing the effects of the six-hour duration requirement by comparing possible hourly loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using a Monte Carlo model of hourly capacity levels that is consistent with the capacity model employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) for more than six hours over any one or more of the tested peak days. Second, PJM adopts the lowest result from these three tests as the Limited Demand Resource Reliability Target. The Limited Demand Resource Reliability Target shall be expressed as a percentage of the forecasted peak load of the PJM Region or such LDA and is converted to Unforced Capacity by multiplying [the reliability target percentage] times [the Forecast Pool Requirement] times [the DR Factor] times [the forecasted peak load of the PJM Region or such LDA, reduced by the amount of load served under the FRR Alternative].