Carbon dioxide removal definition

Carbon dioxide removal means deliberate human activities
Carbon dioxide removal means deliberate human activities removing carbon dioxide from the atmosphere and durably storing it in geological, terrestrial, or ocean reservoirs, or in products. "Carbon dioxide removal" includes existing and potential anthropogenic enhancement of biological or geochemical sinks and including, but not limited to, carbon mineralization and direct air capture and storage.
Carbon dioxide removal or "CDR" means removing carbon dioxide

Examples of Carbon dioxide removal in a sentence

  • Carbon dioxide removal compo- nents shall remove carbon dioxide at a rate of 1.08 cubic feet per hour per per- son.

  • Carbon dioxide removal compo- nents shall be used with breathable air cylinders or oxygen cylinders.

  • They are generally classified in two main groups:• Solar radiation management (SRM) method: technologies that would increase the reflectivity, or albedo, of the Earth’s atmosphere or surface, and• Carbon dioxide removal (CDR) method: technologies or practices that would remove CO2 and other GHGs from the atmosphere.Much of the geoengineering technology discussion centers on SRM methods (e.g., enhanced albedo, aerosol injection).

  • Carbon dioxide removal was shown to be feasible, facilitating the use of lower, more protective tidal volume ventilation.

  • Carbon dioxide removal engineering unit equipment performance at 42.5 m3/h.

  • Carbon dioxide removal components shall be used with breathable air cylinders or oxygen cylinders.

  • Carbon dioxide removal components shall remove carbon dioxide at a rate of 1.08 cubic feet per hour per person.

  • Exploring negative territory: Carbon dioxide removal and climate policy initiatives.

  • Carbon dioxide removal (CDR)39 will be necessary to achieve net-negative CO2 emissions (see B.6).

  • Carbon Capture and Storage (CCS) Technologies leading to Carbon dioxide removal (CDR)Bioenergy with carbon dioxide capture and storage (BECCS) refers to CCS applied to a bioenergy facility.


More Definitions of Carbon dioxide removal

Carbon dioxide removal means, consistent with the
Carbon dioxide removal means deliberate human activities removing carbon dioxide from the atmosphere and durably storing it in geological, terrestrial, or ocean reservoirs, or in
Carbon dioxide removal means deliberate human activities removing carbon dioxide from the atmosphere and durably storing it in geological,
Carbon dioxide removal means, consistent with the intergovernmental panel on climate change's 2019 report entitled global warming of 1.5°C, deliberate human activities removing carbon dioxide from the atmosphere and durably storing it in geological, terrestrial, or ocean reservoirs, or in products. "Carbon dioxide removal" includes existing and potential anthropogenic enhancement of biological or geochemical sinks and including, but not limited to, direct air capture and storage and carbon mineralization.

Related to Carbon dioxide removal

  • Carbon dioxide or “CO2” means the most common of the six primary greenhouse gases, consisting on a molecular level of a single carbon atom and two oxygen atoms.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/ ).

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Compression Ignition Engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.

  • Generator Forced Outage means an immediate reduction in output or capacity or removal from service, in whole or in part, of a generating unit by reason of an Emergency or threatened Emergency, unanticipated failure, or other cause beyond the control of the owner or operator of the facility, as specified in the relevant portions of the PJM Manuals. A reduction in output or removal from service of a generating unit in response to changes in market conditions shall not constitute a Generator Forced Outage.

  • Condensate means hydrocarbon liquid separated from natural gas which condenses due to changes in the temperature or pressure and remains liquid at standard conditions.

  • Carbon dioxide equivalent or “CO2 equivalent” or “CO2e” means the number of metric tons of CO2 emissions with the same global warming potential as one metric ton of another greenhouse gas. Global warming potential values shall be determined consistent with the definition of Carbon Dioxide Equivalent in MRR section 95102(a).

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Cathode ray tube or “CRT” means a vacuum tube, composed primarily of glass, which is the visual or video display component of an electronic device. A “used, intact CRT” means a CRT whose vacuum has not been released. A “used, broken CRT” means glass removed from its housing or casing whose vacuum has been released.

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • Recycled water or “reclaimed water” means treated or recycled waste water of a quality suitable for non-potable uses such as landscape irrigation and water features. This water is not intended for human consumption.

  • Process Gas means gas used for which altemate fuels, other than another gaseous fuel, are not technically feasible such as in applications requiring precise temperature controls and precise flame characteristics.

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • Vapor-mounted seal means a primary seal mounted so there is an annular vapor space underneath the seal. The annular vapor space is bounded by the bottom of the primary seal, the tank wall, the liquid surface and the floating roof.

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS that operates on a high voltage.

  • Reactor means a vat or vessel, which may be jacketed to permit temperature control, designed to contain chemical reactions.

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).