Check Sample definition

Check Sample means a sample analysis or analyses used to confirm the results of another sample. Each sample for the analysis shall be taken or measured at the same location in the water system as the original sample.
Sample 1Sample 2Sample 3

Examples of Check Sample in a sentence

  • It is statistically determined by analysis of at least seven replicates of a blank that has not been digested.Interference Check Sample (ICS): A sample with known concentrations of elements used to determine if the inter-element correction factors of the ICP are accurate.Inter-element Correction Factor (IECs): The effect one element has on other elements due to wavelength overlap.

  • This dataset allowed lower values to apply to estimation, to match the calculated cutoff grade that was close to the lower detection limit of pre-2006 gold fire assay results.8.5 Quality Assurance (QA) & Quality Control (QC) Check Sample and Check Assays8.5.1Historical QA/QC ProgramAfter 1991, exploration samples were assayed for cyanide soluble gold and cyanide soluble silver at the Hycroft laboratory.

  • The %-Recovery is calculated as follows: % Recovery = (Vmeas/Vknown) x 100 Where: Vmeas = Measured value Vknown = Known value The daily QC Check Sample results may be evaluated relative to the QC Check Sample Control Chart upper and lower control limits.

  • A QC Check Sample is a laboratory control sample whose concentration level is near or equivalent to the Calibration Verification Standard but prepared from stock solutions obtained from a different source.

  • If the QC Check Sample results fall out side of the upper and lower control limits, then the out-of-control situation must be investigated.

  • The QC Check Sample serves as an independent check of the instrument measurement process.

  • A sample settlement check can be found in Attachment R, Claim Settlement Check Sample.

  • Office use only V7.001 6 April 2021Date Opened First Check Second Check Sample Check Customer Number Identity (PIDE List 1) Identity (PIDE List 2) Proving your identity To comply with money laundering regulations and to protect our customers from fraud, we must confirm the identity and address of every applicant.

  • The ICP Interference Check Sample (ICS) verifies the contract laboratory's interelement and background correction factors.

  • Check Sample and Method Task Forces Update (Brunette) Shared task force members for these two (see slide) Both met before the holiday with Jim Meffert.

Related to Check Sample

  • Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.

  • DNA sample means any material that has come from a human body and consists of or includes human cells;

  • Check Meter means the Buyer revenue-quality meter section(s) or meter(s), which Buyer may require at its discretion, and which will include those devices normally supplied by Buyer or Seller under the applicable utility electric service requirements.

  • Sample means urine, blood, breath, saliva, or hair.

  • Check valve or “anti-drain valve” means a valve located under a sprinkler head, or other location in the irrigation system, to hold water in the system to prevent drainage from sprinkler heads when the sprinkler is off.

  • Harvest batch means a specifically identified quantity of dried flower or trim, leaves, and other cannabis plant matter that is uniform in strain, harvested at the same time, and, if applicable, cultivated using the same pesticides and other agricultural chemicals, and harvested at the same time.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Check 21 means the Check Clearing for the 21st Century Act.

  • Sampler means a person who is employed by or is an owner of a licensed laboratory, grower, or processor and is authorized by that employer to collect samples in accordance with the testing laboratory's standard operating procedures and these Rules.

  • Destination Point means the delivery point(s) on Carrier’s System where Product is delivered to Shipper, as such points are specified in Section III of this tariff.

  • Drug sample means a unit of a prescription drug that is not intended to be sold and is intended to promote the sale of the drug.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Bid sample means a sample to be furnished by a bidder to show the characteristics of the item offered in the bid.

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.

  • Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.

  • Diameter at Breast Height (DBH) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Batch means a specific quantity of Product that is intended to be of uniform character and quality, within specified limits, and is produced during the same cycle of Manufacture as defined by the applicable Batch Record.

  • Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.

  • Dual sample set means a set of two samples collected at the same time and same location, with one sample analyzed for TTHM and the other sample analyzed for HAA5.

  • Applied behavior analysis means the design, implementation, and evaluation of environmental modifications, using behavioral stimuli and consequences, to produce socially significant improvement in human behavior, including the use of direct observation, measurement, and functional analysis of the relationship between environment and behavior.

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • alternate aerodrome means an aerodrome to which an aircraft may proceed when it becomes either impossible or inadvisable to proceed to or to land at the aerodrome of intended landing, where the necessary services and facilities are available, where aircraft performance requirements can be met and which is operational at the expected time of use. Alternate aerodromes include the following:

  • Aerosol cooking spray means any aerosol product designed either to reduce sticking on cooking and baking surfaces or to be applied on food, or both.

  • Department sample means liquor that is placed in the possession of the