Coating Weight definition

Coating Weight means the amount of zinc ordered to be applied by the EG process to the steel substrate, expressed in grams per square meter of coated substrate surface area.
Coating Weight means the amount of free zinc required to be applied by the Zinc Process to ISC Substrate, expressed in grams per square meter of coated substrate surface area.

Examples of Coating Weight in a sentence

  • Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight (Mass) Applications.

  • Denier: Warp 200 Fill 200 Warp ends per inch 62 (+ or –2) Filling ends per inch 50 (+ or –2) Weight uncoated: 2.5 – 3.0 oz per square yd Coating Weight: 2.0 oz (+ or – 0.25 oz) Coating Type: Polyurethane (pigmented to match fabric color) shall resist oil, discoloration and be free of odor.

  • Pile Weight Primary and Secondary Backing Weight Secondary Coating Weight Total Weight Yarn Denier Pile Height Tufting Gauge Primary Backing Secondary Coating Tuft Bind without Infill Grab Tear (length) Grab Tear (width) Carpet Permeability Flammability (Pill Burn) G-max (Impact Attenuation) Realfill™ Infill Fabric Width Perforation Yarn Shock Pad 46 oz.

  • According to the corrosion rates in Section 3.1 and the minimum coating Table 2.2Minimum Coating Weight Requirements Framing Member Designation thicknesses specified in Table 2.2, zinc based coatings can protect steel for the design life of the structure.

  • Coating Weight : Dr y Film Coating W eight : 2 – 4 g/ m 2/ both sides or 1 – 2 g/ m 2 / side 11 .

  • Galvanized steel structures shall be treated after galvanizing with Sodium Dichromate Solution.Galvanizing Steel Structures for Inland installationsMinimum Average Coating Weight 610 g/m² Bending of flat straps shall be carried out cold.

  • Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight (Mass) Applications; 1998.

  • The dependent variable Zinc Coating Weight (TST) depends on the parameters which contribute directly & indirectly are Thickness of Coil (T), Width of coil (W), Bottom Operator side Nozzle Distance (P1), Top Operator side Nozzle Distance (P2), Bottom Drive Side Nozzle Distance (P3), Top Drive Side Nozzle Distance (P4), Line Speed (S), Zinc Bath Temp (Zbt) & Strip Temp (St).The data collected for above parameters in continuation with reference to line in tabular format.

  • Wire shall be Zinc Aluminium Alloy (90% Zinc, 10% Aluminium) and Coating Weight to be increased if appropriate based on the corrosion rating of ground conditions in line with the manufacturer’s recommendations.

  • ASTM A591/A591M - Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight (Mass) Applications; 1998.

Related to Coating Weight

  • Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Corrosion inhibitor means a substance capable of reducing the corrosivity of water toward metal plumbing materials, especially lead and copper, by forming a protective film on the interior surface of those materials.

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Bottle means any vessel intended to contain liquids and having a capacity of not more than 43

  • Blend means seed consisting of more than one variety of a kind, each in excess of five percent by weight of the whole.

  • Density means the permitted number of dwelling units per

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per million.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR Part 82 subpart G with supplemental tables of alternatives available at (http://www.epa.gov/snap/).

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Weight means aside from the obvious meaning in the physical sciences, the word is used in reference to a person's "size".

  • Harvest batch means a specifically identified quantity of dried flower or trim, leaves, and other cannabis plant matter that is uniform in strain, harvested at the same time, and, if applicable, cultivated using the same pesticides and other agricultural chemicals, and harvested at the same time.

  • Dusting aid means a product designed or labeled to assist in removing dust and other soils from floors and other surfaces without leaving a wax or silicone based coating. “Dusting Aid” does not include “Pressurized Gas Duster.”

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Lightweight means the displacement of a ship in metric tons without cargo, fuel, lubricating oil, ballast water, fresh water and feed water in tanks, consumable stores, and passengers and crew and their effects.

  • Biochemical Oxygen Demand (BOD) shall mean the quantity of oxygen utilized in the biochemical oxidation of organic matter under standard laboratory procedure in five (5) days at 20 degrees Centigrade, expressed in milligrams per liter.

  • Polystyrene foam means blown polystyrene and expanded and

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Total tetrahydrocannabinol means the same as that term is defined in § 3.2-4112.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Diameter at Breast Height (DBH) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.