Conventional cab definition

Conventional cab means a large vehicle configuration in which the driver is behind the front axle and the engine is in front of the axle under a discrete hood.
Conventional cab means a large vehicle configuration in which the driver is behind the front axle and the engine is in front of the axle under a discrete hood. "Convex mirrors" means wide-angle mirrors that enable the operator of a large vehicle to see along the left and right sides of the vehicle by allowing a view of all points on an imaginary horizontal line which is:
Conventional cab means a large vehicle configuration in which at least more than half of the engine length is forward of the foremost point of the windshield base and the steering wheel hub is in the forward quarter of the vehicle length.

Examples of Conventional cab in a sentence

  • Conventional cab as regularly furnished by manufacturer, complete with insulation and all interior trim.

  • Cab: Conventional cab as regularly furnished by manufacturer, complete with insulation and all interior trim.

  • Conventional cab Air cab mountDriver AND passenger cloth air ride seats, hi back with armrests.Moto mirrors, heated, left and right hand remote.

  • Conventional cab or cab‐over‐engines are both acceptable for the box trucks being bid.

  • Shall have 20” minimum front frame extension.Q. Cab: Conventional cab as regularly furnished by manufacturer, complete with insulation and all interior trim.

  • Electrical: Alternator capacity, minimum 130 amps 3-900 CCA, group 31, threaded batteriesmounted under driver side door All clearance lighting to be LED Self-resetting circuit breakers incorporated intofuse panel Steering: Tilt/telescopic steering Dual steering box set-up 18” steering wheel, electric horn button Cab/Interior: Conventional cab Body colour - white Cab construction to be light weight andcorrosion resistant.

  • Cab: To be Regular Conventional cab type with dual windshield wipers and washers, air conditioning, recirculating heater and defroster, directional lights, emergency four-way flasher, mirrors, orange seatbelts, dual sun visors, am/fm radio, High back drivers seat with headrest, two person passenger seat with integral headrests, tilt and telescopic steering column, and dome lights in cab.

  • Conventional cab, forward control cab, island cab, crew cab, van and bus bodies can be regarded as equivalent in influence on brake cooling air flow, except that items which may restrict brake cooling air flow may be fitted to the test vehicle or may be tested separately to determine their effect on brake performance.

  • Manufacturer: Made in the U.S.A. Model: Conventional cab, set-back front axle.

  • Conventional cab with the following equipment shall be supplied,Prestige or Hi-level trim, including headliner, trimmed roof pillar YES/NO Air suspension cab (air bag type) YES/NO Storage console with hinged lid and 12VDC receptacle between seats YES/NO Aluminium kick plates at bottom of both doors YES/NO 12.

Related to Conventional cab

  • Conventional Loan A Mortgage Loan that is not insured by the United States Federal Housing Administration or guaranteed by the United States Department of Veterans Affairs.

  • Conventional filtration treatment means a series of processes including coagulation, flocculation, sedimentation, and filtration resulting in substantial particulate removal.

  • Conventional service and filing means service and filing of documents pursuant to the CCP and CRC absent these E-Filing Rules, i.e. using paper format.

  • Geneva Convention means the Convention of 28 July 1951 relating to the status of refugees, as amended by the New York Protocol of 31 January 1967;

  • Warsaw Convention means the Convention for the Unification of Certain Rules Relating to International Carriage by Air, signed at Warsaw, October 12, 1929, as amended, but not including the Montreal Convention as defined above.

  • Three-dimensional reference system means a system as described in Appendix 2 to this annex;

  • Gestational carrier means an adult woman who enters into an agreement to have an embryo implanted in her and bear the resulting child for intended parents, where the embryo is conceived by using the egg and sperm of the intended parents.

  • STCW Convention means the International Convention on Standards of Training, Certification and Watchkeeping for Seafarers, 1978;

  • ICSID Convention means the Convention on the Settlement of Investment Disputes between States and Nationals of other States, done at Washington, March 18, 1965;

  • Three-Month Term SOFR Conventions means any determination, decision or election with respect to any technical, administrative or operational matter (including with respect to the manner and timing of the publication of Three-Month Term SOFR, or changes to the definition of “interest period,” timing and frequency of determining Three-Month Term SOFR with respect to each interest period and making payments of interest, rounding of amounts or tenors, and other administrative matters) that the Calculation Agent decides may be appropriate to reflect the use of Three-Month Term SOFR as the Benchmark in a manner substantially consistent with market practice (or, if the Calculation Agent decides that adoption of any portion of such market practice is not administratively feasible or if the Calculation Agent determines that no market practice for the use of Three-Month Term SOFR exists, in such other manner as the Calculation Agent determines is reasonably necessary).

  • Regional Center means a diagnostic, counseling, and service coordination center for developmentally disabled persons and their families which is established and operated pursuant to the Welfare and Institutions Code, Sections 4620 through 4669, by a private nonprofit community agency or corporation acting as a contracting agency. As used in these regulations, any reference to the regional center shall, by reference, be applicable to those agencies or persons with which the regional center contracts to provide service coordination to consumers under the provisions of the Welfare and Institutions Code, Section 4648;

  • Adult theater means a theater, concert hall, auditorium, or similar commercial establishment which regularly features persons who appear in a state of nudity or live performances which are characterized by the exposure of "specified anatomical areas" or by "specified sexual activities."

  • Safety Convention means the International Convention for the Safety of Life at Sea, 1974 (a copy of the English text of the articles of which, and of part of the annex to which, is set forth in Schedule 4), as affected by any amendment, other than an amendment objected to by Australia, made under Article VIII of that Convention and, after the date on which the Protocol of 1978 relating to the Safety Convention enters into force for Australia, as also affected by that Protocol;

  • Clinical nurse specialist means a registered nurse with relevant post-basic qualifications and 12 months’ experience working in the clinical area of his/her specified post-basic qualification, or a minimum of four years’ post-basic registration experience, including three years’ experience in the relevant specialist field and who satisfies the local criteria.

  • Conventional Mortgage Loan Any Mortgage Loan that is not an FHA Loan.

  • Regional Centre means a centre established or maintained by the University for the purpose of co-ordinating and supervising the work of Study Centres in any region and for performing such other functions as may be conferred on such centre by the Board of Management;

  • Convention facility means all or any part of, or any combination of, a convention hall, auditorium, arena, meeting rooms, exhibition area, and related adjacent public areas that are generally available to the public for lease on a short-term basis for holding conventions, meetings, exhibits, and similar events, together with real or personal property, and easements above, on, or under the surface of real or personal property, used or intended to be used for holding conventions, meetings, exhibits, and similar events, together with appurtenant property, including covered walkways, parking lots, or structures, necessary and convenient for use in connection with the convention facility. Convention facility includes an attached arena with a seating capacity not exceeding 13,000. Convention facility does not include any arena with a seating capacity exceeding 13,000.

  • Montreal Convention means the Convention for the Unification of Certain Rules Relating to International Carriage by Air, signed at Montreal, May 28, 1999.

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.

  • Chicago Convention means the Convention on International Civil Aviation, signed at Chicago on 7 December 1944, as amended, and its Annexes;

  • Active User means PSC employees, and any users actively participating on the system in any given month of operation, who shall be bound to the terms and conditions of this Agreement. Licensor does not impose a limit on the number of Active Users accessing or registering to use the system.

  • the Convention means the Convention on International Civil Aviation opened for signature at Chicago on 7 December 1944, and includes: (i) any amendment that has entered into force under Article 94(a) of the Convention and has been ratified by all the Contracting Parties to this Agreement, and (ii) any Annex or any amendment thereto adopted under Article 90 of the Convention, insofar as such Annexes or amendments are, at any given time, effective for all the Contracting Parties to this Agreement;

  • Convention Area means the exclusive economic zone of a State Party, established in accordance with international law or, if a State Party has not established such a zone, an area beyond and adjacent to the territorial sea of that State determined by that State in accordance with international law and extending not more than 200 nautical miles from the baselines from which the breadth of its territorial sea is measured.

  • alternate aerodrome means an aerodrome to which an aircraft may proceed when it becomes either impossible or inadvisable to proceed to or to land at the aerodrome of intended landing, where the necessary services and facilities are available, where aircraft performance requirements can be met and which is operational at the expected time of use. Alternate aerodromes include the following:

  • international carriage means any carriage in which, according to the contract of carriage, the place of departure and the place of destination are situated in two different States, or in a single State if, according to the contract of carriage or the scheduled itinerary, there is an intermediate port of call in another State;

  • Civil aircraft means any aircraft other than a public aircraft.