Cutaway Chassis definition

Cutaway Chassis means an incomplete Vehicle with a front end and cab design in which the body ends immediately behind the driver and front passenger seats; the back wall of the Chassis Cab is "cut away," allowing the driver direct access to the body without exiting the vehicle.
Cutaway Chassis means a chassis with a GVW ranging between 4,536 kg (10,000 lbs) and 5,443 kg (12,000 lbs) and a front typical of a van but is open behind the driver’s seat so that a body can be constructed on the rear.
Cutaway Chassis means an incomplete vehicle that has the back of the cab cut out for the intended installation of a structure that permits access from the driver’s area to the back of the vehicle; (châssis tronqué)

Examples of Cutaway Chassis in a sentence

  • Chassis includes Chassis cabs, Cutaway Chassis, and any other Chassis-only incomplete Vehicle.

  • This model type required is a Ford E-450 4x2 DRW Cutaway Chassis.

  • Listed below are minimum technical specifications for the removal of Harnett County EMS’ Type III Ambulance Module and subsequent remount to a 2013 Ford E-450 4x2 Cutaway Chassis.

  • Transfer Module from a Cutaway Chassis Type III to a Cutaway Chassis Type III.

  • LOT F: Low Floor Cutaway; 17 Passenger [15A/2WC] Chassis Model Year 2016 Chassis Make Chevy Chassis Model Express 4500 GM Cutaway Chassis Model Code CG33803 Body Model Year 2016 Body Make Arboc SV Body Model Spirit of Mobility Body Model Code N/A The Contractor has been awarded the Lots set forth in Appendix D: Number 1: Contractor Information.

  • Minimum technical specifications for the manufacture of a Ambulance Module to a 2017 or newer Ford E-450 XL RV Cutaway Chassis.

  • MINIMUM CHASSIS SPECIFICATIONSBIDDER SPECIFICATIONS1.2021 Chevrolet 3500 Series Cutaway Chassis 2.School Bus Certification 3.Frame rail type chassis 4.139" Wheelbase 5.6.0L V8, 342 HP, gasoline engine 6.E10 Flex fuel capable- No Exceptions 7.Tilt steering wheel 8.Cruise control 9.External engine oil cooler 10.6 speed automatic transmission with overdrive 11.Transmission oil cooler 12.13,200 lb.

  • Model Type: The module type required is either a Ford or equal 4x2 Dual Wheel Cutaway Chassis.

  • The City of Canton Water Reclamation Facility is seeking the immediate purchase of Two (2) Ford F-150 Pickup Trucks, Two (2) Ford Transit Connect Cargo Vans, and One (1) Ford E-350 Cutaway Chassis.

  • LOT F: Low Floor Cutaway; 17 Passenger [15A/2WC] Chassis Model Year 2016 Chassis Make Chevy Chassis Model Express 4500 GM Cutaway Chassis Model Code CG33803 Body Model Year 2016 Body Make Arboc SV Body Model Spirit of Mobility Body Model Code N/A Appendix D: Number 2: Contract Pricelist (January 28, 2016) The Contractor has been awarded the Lots set forth in Appendix D: Number 1: Contractor Information.

Related to Cutaway Chassis

  • Snow tyre means a tyre whose tread pattern, tread compound or structure is primarily designed to achieve in snow conditions a performance better than that of a normal tyre with regard to its ability to initiate or maintain vehicle motion;

  • Planned External Financed Generation Capacity Resource means a Planned External Generation Capacity Resource that, prior to August 7, 2015, has an effective agreement that is the equivalent of an Interconnection Service Agreement, has submitted to the Office of the Interconnection the appropriate certification attesting achievement of Financial Close, and has secured at least 50 percent of the MWs of firm transmission service required to qualify such resource under the deliverability requirements of the Reliability Assurance Agreement.

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • Available resources means funds appropriated for the

  • Distribution center means a building or structure used primarily for the storage of goods which are intended for subsequent shipment to retail outlets. Distribution center does not mean a building or structure used primarily to store raw agricultural products, used primarily by a manufacturer to store goods to be used in the manufacturing process, used primarily for the storage of petroleum products, or used for the retail sale of goods.

  • Investment Strategy Modification means with respect to an Investment Strategy, the Portfolio Administrator makes operational adjustments to the Investment Strategy to ensure that, so far as possible, the basic principles and economic effect of the Investment Strategy are maintained or any material modification to the Investment Strategy or its implementation by the Portfolio Administrator.

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.

  • Short-rotation coppice means a specific management regime whereby the poles of trees are cut every one to two years and which is aimed at producing biomass for energy. It is exempt from the UK government timber procurement policy requirements and falls under agricultural regulation and supervision rather than forestry. The exemption only refers to short-rotation coppice, and not 'conventional' coppice which is forest management and therefore subject to the timber policy.

  • M2M Flowgate means Flowgates where constraints are jointly monitored and coordinated as defined and set forth in Schedule D to this Agreement.

  • Single coat means one film coating applied to a metal surface.

  • Landing means the level portion of a stairs located between flights of stairs or located at the top and foot of a stairs.

  • Pistol means any firearm with a barrel less than sixteen inches in length, or is designed to be held and fired by the use of a single hand.

  • NFFE means any Non-U.S. Entity that is not a FFI as defined in relevant U.S. Treasury Regulations, and also includes any Non-U.S. Entity that is organized under the laws of Switzerland or another Partner Jurisdiction and that is not a Financial Institution.

  • Non-Administrator Ambulatory Surgical Facility means an Ambulatory Surgical Facility which does not meet the definition of an Administrator Ambulatory Surgical Facility.

  • STSMA means the Sectional Titles Schemes Management Act 8 of 2011, as amended and include the Regulations issued under the said act;

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per million.

  • Planned Financed Generation Capacity Resource means a Planned Generation Capacity Resource that, prior to August 7, 2015, has an effective Interconnection Service Agreement and has submitted to the Office of the Interconnection the appropriate certification attesting achievement of Financial Close.

  • Stinger-steered automobile or watercraft transporter means an automobile or watercraft transporter

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Investment Strategy is the processes and policies implemented by the Investment Manager for pursuing a particular investment objective managed by an Investment Team.

  • Rechargeable Electrical Energy Storage System (REESS) means the rechargeable energy storage system that provides electric energy for electrical propulsion.

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.

  • aeroplane means a power-driven heavier-than-air aircraft, deriving its lift in flight chiefly from aerodynamic reactions on surfaces which remain fixed under given conditions of flight;

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • Adult foster care means room and board, supervision, and special services to an adult who has a