Data Condition definition

Data Condition means the rule describing the circumstances under which a Covered Entity must use a particular Data Element or Segment.
Sample 1Sample 2Sample 3
Data Condition means all the Data Elements and Code Sets inherent to a Transaction, and not related to the Format of the Transaction. Data Elements that are related to the Format are not Data Content.
Sample 1Sample 2Sample 3
Data Condition has the same meaning as defined in 45 CFR 162.103.
Sample 1

Examples of Data Condition in a sentence

  • Do not set the lower limit above the upper limit.If the limit set is higher than the upper limit, the limit value is set to the same limitwill force the same value. Limit crossing: If a measurement is less than the specified lower limit, bit 11 ("Lower Limit Failed") is set in the Questionable Data Condition Register.

  • For the early data releases the cal- ibrated data generated by the Presearch Data Condition- ing (PDC) module for which systematics have been re- moved was referred to as ap corr flux in the fits files.

  • PostTest Data Condition A: Traditional Diagram TrainingItem Description Negative Positive Same Line Total PreTest Average 23% 92% 92% 64% PostTest Average 83% 51% 94% 75% Condition B: Color Modified TrainingItem Description Negative Positive Same Line Total PreTest Average 9% 89% 85% 58% PostTest Average 79% 48% 90% 71% were greater magnitude of potential via line thickness and that negative and positive charges had different signs to the potential via changed color.

  • The Management Company will not (i) change the definition, Data Condition or use of a Data Element or Segment in a Standard (ii) add any Data Elements or Segments to the maximum defined Data Set, (iii) use any code or Data Elements that are either marked “not used” in the Standard’s Implementation Specification or are not in the Standard’s Implementation Specification(s) or (iv) change the meaning or intent of the Standard’s Implementation Specification(s).

  • The Management Company will not change the definition, Data Condition, or use of a Data Element or Segment in a Standard; add any Data Elements or Segments to the maximum defined Data Set; use any code or Data Elements that are either marked “not used” in the Standard’s Implementation Specification or are not in the Standard’s Implementation Specification(s); or change the meaning or intent of the Standard’s Implementation Specification(s).

  • Pretest Data Condition AOrder Diagram Negative Positive Same Line Total First 35 Traditional 27% 85% 90% 62% Second 35 Modified 20% 98% 94% 69% Condition BOrder Diagram Negative Positive Same Line Total First 35 Modified 12% 88% 84% 60% Second 35 Traditional 8% 90% 85% 56% TABLE II.

  • AASM shall not take any of the following actions: change the definition, Data Condition, or use of a Data Element or Segment in a Standard; add any Data Elements or Segments to the maximum defined Data Set; use any code or Data Elements that are either marked “not used” in the Standard’s Implementation Specification or are not in the Standard’s Implementation Specification(s); or change the meaning or intent of the Standard’s Implementation Specification(s).

  • Single-family Structure Condition Information Source: 2001 Community Development’s Neighborhood Selection Data Condition UnitsKingIrving% UnitsCitywide %Excellent00%7781.4%Very Good183.2%5,6459.9%Above Normal498.7%21,51837.7%Normal24343.1%22,28839.1%Below Normal19634.7%5,70210.0%Poor447.8%9131.6%Very Poor142.5%1470.3%Total564100.0%56,991100.0% Note: Includes residences only.

  • The Service Company will not (i) change the definition, Data Condition or use of a Data Element or Segment in a Standard (ii) add any Data Elements or Segments to the maximum defined Data Set, (iii) use any code or Data Elements that are either marked “not used” in the Standard’s Implementation Specification or are not in the Standard’s Implementation Specification(s) or (iv) change the meaning or intent of the Standard’s Implementation Specification(s).

  • Colgate-Palmolive Co. (2019) 42 Cal.App.5th 630, 635.) The plaintiff bears the burden of proof on the issue of thresholdexposure.

Related to Data Condition

  • Unsafe condition as used in this clause means the actual or potential exposure of contractor or Government employees to a hazardous material as defined in Federal Standard No. 313, and any revisions thereto during the term of this contract, or any other material or working condition designated by the Contracting Officer's Technical Representative (COTR) as potentially hazardous and requiring safety controls.

  • General Condition means these General Terms and Conditions of Contract.

  • Terminal condition means an incurable condition caused by injury, disease, or illness that according to reasonable medical judgment will produce death within six months, even with available life-sustaining treatment provided in accordance with the prevailing standard of medical care.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Conditional Access System means any technical measure and/or arrangement whereby access to a protected radio or television broadcasting service in intelligible form is made conditional upon subscription or other form of prior individual authorisation;

  • Business Condition means the financial condition, business, assets, liabilities and operations of a Person.

  • Review Conditions means (i) the Delinquency Percentage for any Payment Date exceeds the Delinquency Trigger for that Payment Date and (ii) the Noteholders or Note Owners, as applicable, have voted, pursuant to Section 2.03(d) of the Receivables Purchase Agreement, to direct an Asset Representations Review of the Subject Receivables.

  • Minimum Condition has the meaning set forth in Annex I.

  • Conditional Access means control mechanisms, data structures and commands that scramble and encrypt signals in order to provide selective access and denial of specific channels, data, information or services to paying Subscribers.

  • Abnormal Condition means any condition on the Interconnection Facilities which, determined in accordance with Good Utility Practice, is: (i) outside normal operating parameters such that facilities are operating outside their normal ratings or that reasonable operating limits have been exceeded; and (ii) could reasonably be expected to materially and adversely affect the safe and reliable operation of the Interconnection Facilities; but which, in any case, could reasonably be expected to result in an Emergency Condition. Any condition or situation that results from lack of sufficient generating capacity to meet load requirements or that results solely from economic conditions shall not, standing alone, constitute an Abnormal Condition.

  • performance requirement means a requirement that:

  • Specific Conditions means the conditions in addition or in variation to the general conditions which the Commission may lay down specifically for a distribution licensee;

  • Product Conditions means these product terms and conditions. These Product Conditions apply to each series of cash settled Warrants over single equities;

  • Minimum Extended Summer Resource Requirement means, for Delivery Years through May 31, 2017, the minimum amount of capacity that PJM will seek to procure from Extended Summer Demand Resources and Annual Resources for the PJM Region and for each Locational Deliverability Area for which the Office of the Interconnection is required under Tariff, Attachment DD, section 5.10(a) to establish a separate VRR Curve for such Delivery Year. For the PJM Region, the Minimum Extended Summer Resource Requirement shall be equal to the RTO Reliability Requirement minus [the Limited Demand Resource Reliability Target for the PJM Region in Unforced Capacity]. For an LDA, the Minimum Extended Summer Resource Requirement shall be equal to the LDA Reliability Requirement minus [the LDA CETL] minus [the Limited Demand Resource Reliability Target for such LDA in Unforced Capacity]. The LDA CETL may be adjusted pro rata for the amount of load served under the FRR Alternative.

  • Project Requirements means the statement included in the Request for Proposal detailing the technical and other requirements of Canada which are to be met by the successful Bidder, and which are to be addressed in the Bid;

  • Pre commencement condition means a condition imposed on the grant of permission which must be complied with: before any building/ other operation/ or use of the land comprised in the development is begun.

  • Acute condition means that the individual is medically unstable. Such an individual requires frequent monitoring by medical professionals, such as physicians and registered nurses, in order to maintain his or her health status.

  • General Conditions means the “International Development Association General Conditions for Credits and Grants”, dated July 1, 2005 (as amended through October 15, 2006).

  • Termination Conditions means, collectively, (a) the payment in full in cash of the Obligations (other than (i) contingent indemnification obligations not then due and (ii) Obligations under Secured Hedge Agreements and Secured Cash Management Agreements) and (b) the termination of the Commitments and the termination or expiration of all Letters of Credit under this Agreement (unless the Outstanding Amount of the L/C Obligations related thereto has been Cash Collateralized on terms reasonably acceptable to the applicable Issuing Bank, backstopped by a letter of credit reasonably satisfactory to the applicable Issuing Bank or deemed reissued under another agreement reasonably acceptable to the applicable Issuing Bank).

  • Step Down Conditions As of any Distribution Date on which any decrease in any Senior Prepayment Percentage may apply, (i) the outstanding Principal Balance of all Mortgage Loans 60 days or more Delinquent (including Mortgage Loans in REO and foreclosure), averaged over the preceding six month period, as a percentage of the aggregate of the Class Certificate Principal Balances of the Classes of Subordinate Certificates on such Distribution Date, does not equal or exceed 50% and (ii) cumulative Realized Losses with respect to all of the Mortgage Loans do not exceed: · for any Distribution Date on or after the seventh anniversary until the eighth anniversary of the first Distribution Date, 30% of the aggregate Certificate Principal Balance of the Subordinate Certificates as of the Closing Date, · for any Distribution Date on or after the eighth anniversary until the ninth anniversary of the first Distribution Date, 35% of the aggregate Certificate Principal Balance of the Subordinate Certificates as of the Closing Date, · for any Distribution Date on or after the ninth anniversary until the tenth anniversary of the first Distribution Date, 40% of the aggregate Certificate Principal Balance of the Subordinate Certificates as of the Closing Date, · for any Distribution Date on or after the tenth anniversary until the eleventh anniversary of the first Distribution Date, 45% of the aggregate Certificate Principal Balance of the Subordinate Certificates as of the Closing Date, and · for any Distribution Date on or after the eleventh anniversary of the first Distribution Date, 50% of the aggregate Certificate Principal Balance of the Subordinate Certificates as of the Closing Date.

  • Conditional Acceptance means a conditional acceptance by the Liquidity Provider of an extension of the Scheduled Termination Date.

  • Extension Minimum Condition means a condition to consummating any Extension that a minimum amount (to be determined and specified in the relevant Extension Request, in the Borrower’s sole discretion) of any or all applicable Classes be submitted for Extension.

  • Operational Acceptance means the acceptance by the Procuring Entity of the Facilities (or any part of the Facilities where the Contract provides for acceptance of the Facilities in parts), which certifies the Contractor's fulfillment of the Contract in respect of Functional Guarantees of the Facilities (or the relevant part thereof) in accordance with the provisions of GCC Clause 28 (Functional Guarantees) hereof and shall include deemed acceptance in accordance with GCC Clause 25 (Commissioning and Operational Acceptance) hereof.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Serious health condition means an illness, injury, impairment, or physical or mental condition that involves:

  • Serious Medical Condition means, for the purpose of interpreting Overseas Emergency Medical Evacuation and Repatriation cover, a condition which in the opinion of the Company or its authorised representatives constitutes a serious or life threatening medical emergency requiring immediate evacuation to obtain urgent remedial treatment in order to avoid death or serious impairment to an Insured Person’s immediate or long-term health prospects. The seriousness of the medical condition will be judged within the context of the Insured Person’s geographical location and the local availability of appropriate medical care or facilities.