Ethernet Frame definition

Ethernet Frame means the fundamental unit of transmission at the data link layer in an Ethernet network. Ethernet Frame does not include Ethernet control frames unless specified.
Sample 1Sample 2Sample 3

Examples of Ethernet Frame in a sentence

  • RTD calculation is as follows: RTD = T2 – T1 where: T1 is the time when an Ethernet frame leaves the Ingress Reference Point (i.e., Frame exit event) and T2 is the time when an Ethernet Frame arrives back at the Ingress Reference Point (i.e. Frame return event) with the difference measured.

  • RTD calculation is as follows: where: T1 is the time when an Ethernet frame leaves the Ingress Reference Point (i.e., Frame exit event) and T2 is the time when an Ethernet Frame arrives back at the Ingress Reference Point (i.e. Frame return event) with the difference measured.

  • In order to create this next-generation converged network, standard methods must be developed to emulate existing telecommunications formats such as Ethernet, Frame Relay, and ATM over IP-optimized core networks.

  • The setting of the Discard Errored Received Ethernet Frame (DRP) bit of the Hardware Configuration Register (HW_CFG) on page 125 deter- mines if the frame will be retained or dropped.

  • It contains the NM User Data as well as the Control Bit Vector and the Source Node Identifier.NM PacketRefers to an Ethernet Frame containing an IP as well as a UDP header in addition to the data (PDU) transmitted by the NM in the payload section.NM MessageMost abstract term referring to any single information item transferred within the methodology of the NM algorithm.Bus-Off stateRefers to a situation where no cable is connected to the Ethernet HW.

  • The setting of the Discard Errored Received Ethernet Frame (DRP) bit of the Hardware Configuration Register (HW_CFG) on page 123 deter- mines if the frame will be retained or dropped.

  • Examples of protocols supported by L2TPv3 include ATM, HDLC, Ethernet, Frame Relay, and PPP.Section 8.1 shows the format of an L2TPv3 data packet.

  • By default, CDP announcements are sent every 60 seconds on interfaces that support Subnetwork Access Protocol (SNAP) headers, including Ethernet, Frame Relay and Asynchronous Transfer Mode (ATM).

  • The connection to the customer is a copper or fiber connection that connects directly to the customers Ethernet based equipment and supports Ethernet Frame transmission between the provided and the customer.

  • Since the release of the first version of the protocol, L2TP has been adopted for tunneling a number of other layer two protocols like Ethernet, Frame Relay and Asynchronous Transfer Mode (ATM).

Related to Ethernet Frame

  • Ethernet means a family of computer networking technologies for LANs.

  • Signaling System 7 (SS7 means a signaling protocol used by the CCS Network.

  • Common Channel Signaling (CCS means an out-of-band, packet-switched, signaling network used to transport supervision signals, control signals, and data messages. It is a special network, fully separate from the transmission path of the public switched network. Unless otherwise agreed by the Parties, the CCS protocol used by the Parties shall be SS7.

  • Digital Signal Level 0 (DS-0 means the lowest-level signal in the time division multiplex digital hierarchy, and represents a voice-grade channel operating at either the 56 Kbps or 64 Kbps transmission bit rates. There are twenty-four (24) DS-0 channels in a DS-1.

  • Network User means a customer or a potential customer of a transmission system operator, and transmission system operators themselves in so far as it is necessary for them to carry out their functions in relation to transmission;

  • Digital Signal Level 0 or "DS0" means the 64 Kbps zero-level signal in the time-division multiplex hierarchy.

  • Network Element is As Defined in the Act.

  • Synchronous Optical Network (SONET means the optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC 1/STS 1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Digital Signal Level 1 (DS-1 means the 1.544 Mbps first level signal in the time division multiplex hierarchy.

  • Asynchronous means not simultaneous or concurrent in time. For the purpose of this general rule, asynchronous telecommunication technologies for telemedicine or telehealth services may include audio and video, audio without video, client or member portal and may include remote monitoring. "Asynchronous" does not include voice messages, facsimile, electronic mail or text messages.¶

  • Common Channel Signaling (CCS) means an out-of-band, packet-switched, signaling network used to transport supervision signals, control signals, and data messages. It is a special network, fully separate from the transmission path of the public switched network. Unless otherwise agreed by the Parties, the CCS protocol used by the Parties shall be SS7.

  • Terrestrial means to live on or grow from land.

  • Signaling System 7 (SS7) means a signaling protocol used by the CCS Network.

  • Digital Signal Level 1 or "DS1" means the 1.544 Mbps first-level signal in the time-division multiplex hierarchy. In the time-division multiplexing hierarchy of the telephone network, DS1 is the initial level of multiplexing.

  • Digital Signal Level 3 or "DS3" means the 44.736 Mbps third-level in the time-division multiplex hierarchy. In the time-division multiplexing hierarchy of the telephone network, DS3 is defined as the third level of multiplexing.

  • Bandwidth means a distributor’s defined tolerance used to flag data for further scrutiny at the stage in the VEE process where a current reading is compared to a reading from an equivalent historical billing period. For example, a 30 percent bandwidth means a current reading that is either 30 percent lower or 30 percent higher than the measurement from an equivalent historical billing period will be identified by the VEE process as requiring further scrutiny and verification;

  • Stack means any point in a source designed to emit solids, liquids, or gases into the air, including a pipe or duct but not including flares.

  • SPID is the number that identifies a service provider to the relevant NPAC. The SPID may be a state-specific number. "Serving Wire Center" denotes the CenturyLink building from which dial tone for local Exchange Service would normally be provided to a particular End User Customer premises. "Signaling System 7" or "SS7" is an out-of-band signaling protocol consisting of four basic sub- protocols:

  • SDSL or "Symmetric Digital Subscriber Line" is a baseband DSL transmission technology that permits the bi-directional transmission from up to 160 kbps to 2.048 Mbps on a single pair. "VDSL" or "Very High Speed Digital Subscriber Line" is a baseband DSL transmission technology that permits the transmission of up to 52 Mbps downstream (from the Central Office to the End User Customer) and up to 2.3 Mbps digital signal upstream (from the End User Customer to the Central Office). VDSL can also be 26 Mbps symmetrical, or other combination.

  • Rack means a mechanism for delivering motor vehicle fuel or diesel from a refinery or terminal into a truck, trailer, railroad car, or other means of non-bulk transfer.

  • PSTN means the public switched telephone network.

  • Supported Web Browser means the current release from time to time of Microsoft Edge, Mozilla Firefox, Google Chrome or Apple Safari, or any other web browser that the Provider agrees in writing shall be supported;

  • Spectrum Compatibility means the capability of two (2) copper loop transmission system technologies to coexist in the same cable without service degradation and to operate satisfactorily in the presence of cross talk noise from each other. Spectrum compatibility is defined on a per twisted pair basis for specific well-defined transmission systems. For the purposes of issues regarding Spectrum Compatibility, service degradation means the failure to meet the Bit Error Ratio (BER) and Signal-to-Noise Ratio (SNR) margin requirements defined for the specific transmission system for all Loop lengths, model Loops, or loss values within the requirements for the specific transmission system.

  • BT Network means the communications network owned or leased by BT and used to provide a Service.

  • Connectivity means the provision of a Permanent Separated Bicycle Lane system that reflects desired routes between all major origins and destinations in the city.

  • Digital Signal Level means one of several transmission rates in the time division multiplex hierarchy.