Exposure standard definition

Exposure standard means an airborne concentration of a particular substance in a person's breathing zone as established by the National Occupational Health and Safety Commission's Adopted National Exposure Standards for Atmospheric Contaminants in the Occupational Environment1 [NOHSC:1003(1991)] (as amended from time to time).
Sample 1Sample 2Sample 3
Exposure standard means an exposure standard set out in the Workplace Exposure Standards for Airborne Contaminants, published by SafeWork Australia on its Internet site;
Sample 1Sample 2
Exposure standard means the airborne concentration of a particular substance in the worker's breathing zone, exposure to which, according to current knowledge, should not cause adverse health effects nor cause undue discomfort to nearly all workers.
Sample 1Sample 2

Examples of Exposure standard in a sentence

  • Exposure standard of chemical compound, biological exposure standard Domestic regulations Glycerin ACGIH regulation Glycerin Biological release regulation Glycerin Individual protection equipments Respiratory system protection Glycerin TWA - 10 mg/m3 TWA - 10 mg/m3 Not related No information available Use certified respiratory protection equipments in a release of gas/liquid according to their chemicophysical properties.

  • Exposure standard means an exposure standard in the Workplace Exposure Standard for Airborne Contaminants in Appendix A.

  • Exposure standard for asbestos is a respirable fibre level of 0.1 fibres/ml of air measured in a person’s breathing zone and expressed as a time weighted average fibre concentration calculated over an eight hour working day and measured over a minimum of four hours in accordance with: • The Membrane Filter Method; • A method determined by the relevant regulator.

  • Whenever possible, the noun shall be used in place of the pronoun whenever gender is being defined.

  • Appendix A: Noise Exposure Computation of the OSHA Occupational Noise Exposure standard, 29 CFR 1910.95, can be used to help determine the amount of time needed inside an enclosure to reduce noise exposures below select target levels, such as a TWA of 90 dBA or 85 dBA.

  • Exposure standard for noise means LAeq,8h of 85 dB(A) or Lc,peak of 140 dB(C) where LAeq,8h means the eight hour equivalent continuous A-weighted sound pressure level in decibels (dB(A)) referenced to 20 micropascals, determined in accordance with AS/NZS 1269.1:2005 and Lc,peak means the C-weighted peak sound pressure level in decibels (dB(C)) referenced to 20 micropascals, determined in accordance with AS/NZS 1269.1:2005.

  • Exposure standard – Time Weighted Average (TWA) means the average airborne concentration of a particular substance when calculated over a normal eight hour working day, for a five-day working week.Short Term Exposure Limit (STEL) means the exposure level that may be equalled (but should not be exceeded for no longer than 15 minutes and should not be repeated more than 4 times per day.

  • It can significantly impair the ability to communicate by reducing the capacity to interact with friends, family, and co-workers and can eventually lead to psychological and social isolation.The OSHA Occupational Noise Exposure standard, 29 CFR Part 1910.95, sets limits on the intensity and duration of noise that workers are permitted to be exposed to.

  • Exposure standard values do not set the distinction between safe and unsafe exposures and therefore the application of precise adjustments is not appropriate.Where an exposure standard is set close to an analytical limit of detection there may be difficulties in measuring exposure and demonstrating compliance with the WHS Regulations if an exposure standard is adjusted downwards.

  • Exposure standard of chemicals & Biological, etcIngredient(CAS #)KOSHA-TWAKOSHA-STELACGIH-TWAACGIH-STELBiological *CommentTLV-TWA (Threshold Limit Value Time Weighted Average) TLV-STEL (Threshold Limit Value-Short Term Exposure Limit) The way of process controlIt should be installed with all air exhauster & a part of air exhauster in work place.


More Definitions of Exposure standard

Exposure standard. – means the maximum level for noise exposure in the workplace as set out in 3.03(1) of the Safety Standards Regulations.
Sample 1Sample 2
Exposure standard means an airborne concentration of a particular substance in a person's breathing zone, as established by the National Occupational Health and Safety Commission's Exposure Standards for Atmospheric Contaminants in the Occupational Environment [NOHSC:1003(1991)]5.
Sample 1
Exposure standard means an airborne concentration of lead dust, mist or fumes in a person's breathing zone, as set out in the Adopted National Exposure Standards for Atmospheric Contaminants in the Occupational Environment published by the National Occupational Health and Safety Commission, as amended or published from time to time2;
Sample 1
Exposure standard means an airborne concentration of a particular substance in the worker’s breathing zone, exposure to which, over a period of 8 hours followed by a period free of exposure of 16 hours, and according to current knowledge, should not cause adverse health effects nor cause undue discomfort to nearly all workers.
Sample 1
Exposure standard means an airborne concentration of a particular substance in a person’s breathing zone, determined in accordance with the document entitled, Exposure Standards for Atmospheric Contaminants in the Occupational Environment 3, published by Worksafe Australia. The exposure standard for chrysotile is taken to be 0.5 fibres permillilitre or air rather than the standard derived from the Worksafe Australia document..
Sample 1

Related to Exposure standard

  • Standard Conditions means the “International Bank for Reconstruction and Development and International Development Association Standard Conditions for Grant Financing Made by the Bank out of Trust Funds”, dated February 25, 2019.

  • Triage facility means a short-term facility or a portion

  • European standard means a standard adopted by the European Committee for Standardisation, the European Committee for Electrotechnical Standardisation or the European Telecommunications Standards Institute and made available for public use;

  • Large Facility Interconnection Procedures or “LFIP”) shall mean the interconnection procedures applicable to an Interconnection Request pertaining to a Large Generating Facility that are included in Attachment X of the NYISO OATT. Standard Large Generator Interconnection Agreement (“LGIA”) shall mean this Agreement, the form of interconnection agreement applicable to an Interconnection Request pertaining to a Large Generating Facility, that is included in Attachment X of the NYISO OATT. System Deliverability Upgrades shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to Byways and Highways and Other Interfaces on the existing New York State Transmission System and Distribution System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard at the requested level of Capacity Resource Interconnection Service. System Protection Facilities shall mean the equipment, including necessary protection signal communications equipment, required to (1) protect the New York State Transmission System from faults or other electrical disturbances occurring at the Large Generating Facility and (2) protect the Large Generating Facility from faults or other electrical system disturbances occurring on the New York State Transmission System or on other delivery systems or other generating systems to which the New York State Transmission System is directly connected. System Upgrade Facilities shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff shall mean the NYISO Open Access Transmission Tariff (“OATT”), as filed with the Commission, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Developer is engaged in on-site test operations and commissioning of the Large Generating Facility prior to Commercial Operation.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Occupational exposure means the state of being actually or potentially exposed to contact with SARS-CoV-2 virus or COVID-19 disease related hazards at the work location or while engaged in work activities at another location.

  • Exposure Amount as of any date means, with respect to any Revolving Collateral Loan or Delayed Funding Loan, the excess of (a) the Borrower’s maximum funding commitment thereunder over (b) the Principal Balance of such Revolving Collateral Loan or Delayed Funding Loan. For the avoidance of doubt, Exposure Amounts in respect of a Defaulted Loan shall be included in the calculation of the Exposure Amount if the Borrower is at such time subject to contractual funding obligations with respect to such Defaulted Loan and such obligation has not ceased to be enforceable under the U.S. Bankruptcy Code.

  • Transit-oriented facility means a facility that houses a transit station in a manner that promotes transit ridership or passenger rail use.

  • Energy efficiency portfolio standard means a requirement to

  • Standard Letter of Credit Practice means, for Issuing Bank, any domestic or foreign law or letter of credit practices applicable in the city in which Issuing Bank issued the applicable Letter of Credit or, for its branch or correspondent, such laws and practices applicable in the city in which it has advised, confirmed or negotiated such Letter of Credit, as the case may be, in each case, (a) which letter of credit practices are of banks that regularly issue letters of credit in the particular city, and (b) which laws or letter of credit practices are required or permitted under ISP or UCP, as chosen in the applicable Letter of Credit.

  • Facility Limit means, $175,000,000, as reduced or increased from time to time pursuant to the terms hereof. References to the unused portion of the Facility Limit shall mean, at any time of determination, an amount equal to (x) the Facility Limit at such time, minus (y) the Aggregate Capital at such time.

  • Exposure has the meaning specified in Paragraph 12, except that after the word “Agreement” the words “(assuming, for this purpose only, that Part 1(f) of the Schedule is deleted)” shall be inserted.

  • Facility Production Limit means the production limit placed on the main product(s) or raw materials used by the Facility that represents the design capacity of the Facility and assists in the definition of the operations approved by the Director.

  • High-risk exposure period means the following time period:

  • Australian Standard means a standard published by Standards Australia.

  • Clean coal facility means an electric generating

  • Facility Exposure means, at any date of determination, the sum of the aggregate principal amount of all outstanding Advances and the Available Amount under all outstanding Letters of Credit.

  • Customer Interconnection Facilities means all facilities and equipment owned and/or controlled, operated and maintained by Interconnection Customer on Interconnection Customer’s side of the Point of Interconnection identified in the appropriate appendices to the Interconnection Service Agreement and to the Interconnection Construction Service Agreement, including any modifications, additions, or upgrades made to such facilities and equipment, that are necessary to physically and electrically interconnect the Customer Facility with the Transmission System.

  • Total Revolving Exposure means, as to any Revolving Lender at any time, the unused Commitments and Revolving Exposure of such Revolving Lender at such time.

  • Hazardous Waste Management Facility means, as defined in NCGS 130A, Article 9, a facility for the collection, storage, processing, treatment, recycling, recovery, or disposal of hazardous waste.

  • Availability Standards has the meaning set forth in the CAISO Tariff.

  • Standard Contract means a contract concerning a wholesale energy product admitted to trading at an organised market place, irrespective of whether or not the transaction actually takes place on that market place;

  • Solid waste management facility means the same as that term is defined in Section 19-6-502.

  • Solid waste facility means a site, location, tract of land, installation, or building used for incineration, composting, sanitary landfilling, or other methods of disposal of solid wastes or, if the solid wastes consist of scrap tires, for collection, storage, or processing of the solid wastes; or for the transfer of solid wastes.

  • Mandatory City Requirements means those City laws set forth in the San Francisco Municipal Code, including the duly authorized rules, regulations, and guidelines implementing such laws that impose specific duties and obligations upon Contractor.

  • LC Conditions has the meaning given to such term in Section 2.9.