Exterior insulation and finish system definition

Exterior insulation and finish system means a non-load bearing exterior cladding or finish sys- tem, and all component parts therein, used on any part of any structure, and consisting of:
Sample 1Sample 2Sample 3
Exterior insulation and finish system means an exterior cladding or finish system used on any part of any structure and consisting of:
Sample 1
Exterior insulation and finish system means a non-load bearing exterior cladding or finish system, and all
Sample 1

Examples of Exterior insulation and finish system in a sentence

  • Exterior insulation and finish system (EIFS) and similar troweled finishes shall be trimmed in wood, masonry, or other approved materials and shall be sheltered from extreme weather by roof overhangs or other methods.

  • Exterior insulation and finish system (EIFS) materials and applications are prohibited, except where used to simulate an existing material and when 36 inches above grade and not within an entryway, and comprising less than 15% of the facade.

  • Exterior insulation and finish system (EIFS) shall not be used on the lower three (3) feet of any façade and shall not exceed 30% of the exterior wall area of a building.

  • Exterior insulation and finish system (EIFS) is a barrier exterior finish system that combines insulation qualities with a durable and aesthetically adaptable finish, but the main concern that has developed with EIFS is that water might get behind the barrier system and remain trapped.

  • Exterior insulation and finish system refers to an exterior assembly composed of an inner layer of ther- mal insulation board and an outer layer forming the protective finish coating.

  • Exterior insulation and finish system panels (EIFS) were also used on the façade.

  • The dismantling Plan should invariably show various stage of dismantling, equipments to be used for dismantling area likely to be affected by debris, any adjacent building likely to be affected and action to be taken thereof.

  • Exterior insulation and finish system (EIFS) applied over concrete and masonry.

  • Exterior insulation and finish system (EIFS) and similar troweled finishes shall be trimmed in wood, masonry, or other approved materials and shall be sheltered from extreme weather by roof overhangs or other methods.iv.

  • R703.9.2 Exterior insulation and finish system (EIFS) with drainage.

Related to Exterior insulation and finish system

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Radionuclide means a radioactive element or a radioactive isotope.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Yard waste means leaves, grass clippings, yard and garden debris and brush, including clean woody vegetative material no greater than 6 inches in diameter. This term does not include stumps, roots or shrubs with intact root balls.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than one micrometer is rejected by an engineered barrier, primarily through a size exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Aboveground tank means a device meeting the definition of tank that is situated in such a way that the entire surface area of the tank is completely above the plane of the adjacent surrounding surface and the entire surface area of the tank (including the tank bottom) is able to be visually inspected.

  • Demolition waste means that solid waste that is produced by the destruction of structures, or their foundations, or both, and includes the same materials as construction waste.

  • Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

  • Septic tank means a water tight tank designed to receive sewage and to effect the adequate decomposition of organic matter in sewage by bacterial action;

  • Expanded polystyrene means blown polystyrene and expanded

  • Incinerator means any enclosed device that:

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Radiation therapy simulation system means a radiographic or fluoroscopic x-ray system intended for localizing the volume to be exposed during radiation therapy and confirming the position and size of the therapeutic irradiation field.