Filtering face piece definition

Filtering face piece or "dust mask" means a negative pressure particulate respirator with a filter as an integral part of the face piece or with the entire face piece composed of the filtering medium, not equipped with elastomeric sealing surfaces and adjustable straps.
Sample 1Sample 2Sample 3

Examples of Filtering face piece in a sentence

  • When working with nanomaterials, one of the following types of respirators must be worn:• Filtering face piece (N-95 or greater)• Elastomeric half- or full-face piece with N-100, R-100, or P-100 filters; or• Powered air-purifying respirator with N-100, R-100, or P-100 filters.

  • Filtering face piece (class 3) (FFP3) respirators should be worn whenever there is a risk of airborne transmission of pandemic COVID-19 i.e. during aerosol generating procedures (AGPs) and at all times in intensive care unit (ICU), intensive therapy unit (ITU), high dependency unit (HDU) where COVID-19 patients are cohorted.

  • Filtering face piece respirators, Gas Mask (canister) Respirators and Cartridge Respirators are effective when properly selected, fitted and used.

  • Filtering face piece (class 3) (FFP3) respirators should be worn whenever there is a risk of airborne transmission of pandemic COVID-19 i.e. during aerosol generating procedures (AGPs)and at all times in intensive care unit (ICU), intensive therapy unit (ITU), high dependency unit (HDU) where COVID-19 patients are cohorted.

  • When working with nanomaterials, one of the following types of NIOSH-approved respirators may be needed:• Filtering face piece (N-95 or greater)• Elastomeric half- or full-face piece with N-100, R-100, or P-100 filters; or• Powered air-purifying respirator with N-100, R-100, or P-100 filters.If a respirator is advised based on the researcher’s risk assessment and/or an EHS risk assessment, contact the Occupational Health Program to schedule annually required respiratory medical clearance and fit testing.

  • Provider shall conduct a respirator medical evaluation in accordance with the requirements of the OSHA Respiratory Protection Standard, 29 CFR 1910.134(e), including: 21.3.2.1.1. Employees will use Filtering face piece, Air-Purifying Respirator, and/or Self-Contained Breathing Apparatus used to protect against air-borne pathogens, riot-control agents, and known or unknown hazardous substances less than once per week for more than four hours at a time.

  • Filtering face piece (dust mask) means a negative pressure particulate respirator with a filter as an integral part of the face piece or with the entire face piece composed of the filtering medium.

  • All respirators carry the CE mark plus the European standard and performance category markings.EN 149 Filtering face piece particulate respirators.EN 405 Valved-filtering half-mask respirators for gases and particulates.

  • Filtering face piece respirators (dust masks, KN95s, N95s) are considered ‘disposable’ and are intended for one-time use only.

  • However, the City Clerk does not handle this activity, and when the City completed its reorganization, it did not reassign this duty.According to Finance, due to the lack of other available resources, it assumed the duty of tracking security deposits in Munis but did not have the proper staff resources to update the information in Yardi.

Related to Filtering face piece

  • Filtering facepiece (dust mask) means a negative pressure particulate respirator with a filter as an integral part of the facepiece or with the entire facepiece composed of the filtering medium, not equipped with elastomeric sealing surfaces and adjustable straps.

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • smart metering system means an electronic system that can measure energy consumption, providing more information than a conventional meter, and can transmit and receive data for information, monitoring and control purposes, using a form of electronic communication;

  • Staging pile means an accumulation of solid, non- flowing remediation waste (as defined in this section) that is not a containment building and that is used only during remedial operations for temporary storage at a facility. Staging piles must be designated by the Director according to the requirements of § 264.554 of this regulation.

  • Net metering system means a facility for the production of electrical energy that does all of the following:

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Fuel burning equipment means any furnace, boiler, apparatus, stack and all associated equipment, used in the process of burning fuel.

  • Metering Equipment means all metering equipment installed at the metering points designated in the appropriate appendix to an Interconnection Service Agreement. Minimum State of Charge:

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Filter profile means a graphical representation of individual filter performance, based on continuous turbidity measurements or total particle counts versus time for an entire filter run, from startup to backwash inclusively, that includes an assessment of filter performance while another filter is being backwashed.

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • PAD means a Preauthorized Debit.

  • General purpose degreaser means a product designed to remove or dissolve grease, grime, oil and other oil-based contaminants from a variety of substrates, including automotive or miscellaneous metallic parts. General purpose degreaser does not include engine degreaser, general purpose cleaner, adhesive remover, electronic cleaner, metal polish or cleanser, products used exclusively in solvent cleaning tanks or related equipment, or products that are (i) sold exclusively to establishments which manufacture or construct goods or commodities; and (ii) labeled "not for retail sale." Solvent cleaning tanks or related equipment includes, but is not limited to, cold cleaners, vapor degreasers, conveyorized degreasers, film cleaning machines, or products designed to clean miscellaneous metallic parts by immersion in a container.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Metering System means all meters and metering devices (including current transformers and potential transformers) installed by the Company and uses to measure Electricity and delivery by the Company and receipt by the BPDB of Net Energy Output. The Metering System shall be owned and maintained by the Company.

  • Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.

  • Data Universal Numbering System +4 (DUNS+4) number means the DUNS number assigned by D&B plus a 4- character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts for the same parent concern.

  • Cannabis testing facility means an entity registered by

  • Metering Point means, for meters that do not use instrument transformers, the point at which the billing meter is connected. For meters that use instrument transformers, the point at which the instrument transformers are connected.

  • labelling means any words, particulars, trade marks, brand name, pictorial matter or symbol relating to a food and placed on any packaging, document, notice, label, ring or collar accompanying or referring to such food;

  • Data Universal Numbering System (DUNS) number means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities.

  • technical specification means, with respect to any Software, the document setting forth the technical specifications for such Software and included in the Statement of Work.