Examples of Friction loss in a sentence
Friction loss" means the pressure drop expressed in feet of water or psi caused by liquid flowing through the piping and fittings.
Friction loss through the valve an approved air gap separation or a reduced pressure should not exceed 10 percent of the static mainline head.
Friction loss" means the pressure drop expressed in feet (meters) of water or psi (Pascals) caused by liquid flowing through the piping and fittings.
Friction loss analysis: The contractor shall prepare a friction loss calculation showing the total cumulative friction loss from the point of connection at the municipal water main through the water meter, the back flow assembly, the entire irrigation main line and secondary piping network (including all valves and fittings) to the last large area gear drive head on the zone located the maximum distance from the irrigation system point of connection.
Handbook of PVC Pipe Design and Construction, 2nd Edition, Uni-Bell Plastic Pipe Association, 1982.f = L (Q/K)1.85Where:f = friction loss through pipe (ft) L = length of pipe (ft)Q = flow (gpm)K = Constant from Table C-3-1(K can be determined for any PVC pipe conforming to the above ASTM standards using the equation K = 42.17 * D2.63) Table A-3-1 Friction loss for some PVC pipe fittings, given in terms of equivalent length of pipe, are provided in Table A-3-2.
BaseQ : Base flow rate (KL/Hr) Pf baseQ: Friction loss in a pipeline section at Base flow rate (BaseQ) before commencement of DRA injection.
Friction loss can be overcome by using a larger pipe size or changing piping materials.
Friction loss can also be decreased due to rubber deposits, dust particles, fuel spillage, snow, ice and slush.
Friction loss is the head required to maintain the required flow in a straight alignment against frictional resistance because of pipe or channel roughness.
Pf untreated: Friction loss in a pipeline section at the Increased flow rate or Actual Flow rate (KL/Hr) if there would have been no DRA injection.