General Pretreatment Standards definition

General Pretreatment Standards. Means any regulations containing pollutant discharge limits or requirements applicable to all industrial users, promulgated by EPA in 40 CFR Chapter One, Subchapter N, Parts 401 through 403 (as amended), in accordance with Section 307(b) and (c) of the Clean Water Act.
General Pretreatment Standards or “GPS” means the standards contained in Appendix B of this Ordinance which are applicable to all discharges into sewerage systems tributary to water reclamation facilities.

Examples of General Pretreatment Standards in a sentence

  • Each Industrial User in each Member Town shall provide necessary treatment as required to comply with said Regulations, including the Local Discharge Limitations set forth therein and all applicable National Categorical Pretreatment Standards and General Pretreatment Standards.

  • Users shall provide wastewater treatment as necessary to comply with this ordinance and shall achieve compliance with the Federal General Pretreatment Standards, any applicable categorical pretreatment standards, local limits, and the prohibitions set out in Section 4.6.B.1 of this ordinance within the time limitations specified by EPA, State, or the County, whichever is more stringent.

  • This regulatory structure achieves the same goal as the proposed revisions to the General Pretreatment Standards - simplification of oversight requirements - without creating a need for updates to state and local laws.

  • EPA collected 38,096 data points on 126 separate pollutant parameters (including nitrogen, phosphorus, solids, flow, chemicals such as formalin, diquat, and copper).Indirect dischargers file compliancemonitoring reports with their control authority ( e.g., POTW) at least twice per year as required under the General Pretreatment Standards (40 CFR 403) while direct dischargers file discharge monitoring reports with their permitting authority at least once per year.

  • Categorical Industrial User (CIU) - An industrial user subject to categorical standards in accordance with the EPA General Pretreatment Standards (40 CFR Part 403).

  • They also raised concerns about additional reporting requirements for the Control Authorities typically associated with CIUs, such as identifying CIUs in their annual pretreatment report to the Approval Authority.In response, EPA did not revise the General Pretreatment Standards to create the proposed DIU category and associated requirements.

  • Incorporation of General Pretreatment Standards – “40 CFR 403.1 et seq.

  • EPA estimates that these changes to the Existing General Pretreatment Standards would reduce costs to POTWs to implement and enforce this proposed rule by $47 million annually (see TEDD).

  • Bypass - The anticipated or unanticipated intentional diversion of waste streams from any portion of a treatment works.Categorical Industrial User (CIU) - An industrial user subject to categorical standards in accordance with the EPA General Pretreatment Standards (40 CFR Part 403).

  • Categorical Industrial User(CIU) - An industrial user subject to categorical standards in accordance with the EPA General Pretreatment Standards (40 CFR Part 403).Certified Laboratory - A laboratory certified by the NJDEP Office of Quality Assurance, to do wastewater analyses by approved test procedures.

Related to General Pretreatment Standards

  • Pretreatment standards means all applicable Federal rules and regulations implementing Section 307 of the Act, as well as any nonconflicting State or local standards. In cases of conflicting standards or regulations, the more stringent thereof shall be applied.

  • Categorical pretreatment standard or "categorical standard" means any regulation containing pollutant discharge limits promulgated by the environmental protection agency in accordance with sections 307(b) and (c) of the Act (33 U.S.C. section 1317) that apply to a specific category of users and that appear in 40 CFR chapter I, subchapter N, parts 405 through 471.

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • Uniform Grant Management Standards or “UGMS” means uniform grant and contract administration procedures, developed under the authority of Chapter 783 of the Texas

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • Texas Grant Management Standards or “TxGMS” means uniform grant and contract administration procedures, developed under the authority of Chapter 783 of the Texas Government Code, to promote the efficient use of public funds in local government and in programs requiring cooperation among local, state, and federal agencies. Under this Grant Agreement, TxGMS applies to Grantee except as otherwise provided by applicable law or directed by System Agency. Additionally, except as otherwise provided by applicable law, in the event of a conflict between TxGMS and applicable federal or state law, federal law prevails over state law and state law prevails over TxGMS.

  • Pretreatment means the reduction of the amount of pollutants, the elimination of pollutants, or the alteration of the nature of pollutant properties in wastewater prior to or in lieu of discharging or otherwise introducing such pollutants into a POTW.

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • Spatial Planning and Land Use Management Act means the Spatial Planning and Land Use Management Act, 2013 (Act 16 of 2013);

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Treatment zone means a soil area of the unsaturated zone of a land treatment unit within which hazardous constituents are degraded, transformed, or immobilized.

  • Sewage Treatment Plant means any arrangement of devices and structures used for treating sewage.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Substance abuse treatment means outpatient or inpatient services or participation in Alcoholics Anonymous or a similar program.

  • Clean air standards, as used in this clause, means:

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Treatment Plant means the onshore plant to be constructed by the Joint Venturers for the liquefaction and treatment of natural gas and condensate as contemplated in the recitals to this Agreement.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Pretreatment requirements means any substantive or procedural requirement related to pretreatment, other than a pretreatment standard, imposed on an industrial user.

  • Air Standards Manager means the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, or any other person who represents and carries out the duties of the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, as those duties relate to the conditions of this Certificate.

  • Virginia Stormwater Management Act means Article 2.3 (§ 62.1-44.15:24 et seq.) of Chapter 3.1 of Title 62.1 of the Code of Virginia.

  • Cosmetology means any one and/or combination of practices generally and usually performed by and known as the occupation of beauty culturalist, cosmeticians, cosmetologists or hairdressers or any person holding him or herself out as practicing cosmetology in or upon a place or premises. Cosmetology shall include, but otherwise not be limited to, the following: embellishing, arranging, dressing, curling, waving, cleansing, beautifying, cutting, singeing, bleaching, coloring, or similar work upon the hair of any person by any means and with hands or mechanical or electrical apparatuses, devices or appliances or by use of cosmetic preparations, antiseptics, tonics, lotions, creams or otherwise, massaging, cleansing, stimulating, manipulating, exercising, beautifying or similar work, the scalp, face, neck, arms, hands, bust or upper part of the body, or manicuring, pedicuring or sculpting the nails of any person.

  • Public work means public work as defined in section 2 of P.L.1963, c.150 (C. 34:11-56.26) and which is subject to the provisions of P.L.1963, c.150 (C. 34:11-56.25 et seq.). Public work shall not include the provision of goods or products.

  • Safety Management System has the meaning given to it in the ISM Code.