Geologic hazard areas definition

Geologic hazard areas means those areas that because of their susceptibility to erosion, landsliding, earthquake, volcanic lahar, liquefaction or other geological events, are not suited to siting commercial, residential or industrial development consistent with public health or safety concerns.
Geologic hazard areas means lands or areas characterized by geologic, hydrologic, and topographic conditions that render them susceptible to potentially significant or severe risk of landslides, erosion, or seismic activity.
Geologic hazard areas means lands or areas characterized by geologic, hydrologic and topographic conditions that render them susceptible to varying degrees of potential risk of landslides, erosion, or seismic or volcanic activity; and areas characterized by geologic and hydrologic conditions that make them vulnerable to contamination of ground water suppliesthrough infiltration of contaminants to aquifers.

Examples of Geologic hazard areas in a sentence

  • Geologic hazard areas shall be classified according to the criteria in this section as follows: A.

  • Geologic hazard areas include lands that are affected by natural processes that make them susceptible to landslides, seismic activity, and severe erosion, especially bluff and ravine areas.

  • Geologic hazard areas are those lands that areaffected by natural processes that make them susceptible togeologic events, such as landslides, seismic activity and severe erosion, especially bluff and ravine areas andsteep slopes.

  • Geologic hazard areas shall be mapped after geotechnical analysis for those sites which are shown on Map 3 of the 2007 Comprehensive Plan as "geologic constraints," or for sites that are known to the Administrator to contain geologic hazards.

  • SMC 20.80.220 Geological hazard - Classification Geologic hazard areas shall be classified according to the criteria in this section as follows: A.

  • Geologic hazard areas can potentially damage property and/or cause injury or death.

  • Geologic hazard areas are those lands that are susceptible to erosion, landsliding, seismic, or other geological events as identified by WAC 365-190-120.

  • Geologic hazard areas shall be classified according to the criteria in this section.

  • Complete forms and fax back to (708) 422-3482, or you may drop them off at the Building Department, located inside the above address.

  • Geologic hazard areas in the Project area include landslide hazard areas, seismic areas, and erosion hazard areas.


More Definitions of Geologic hazard areas

Geologic hazard areas means areas susceptible to erosion, sliding, earthquake, or other geologic events (see Section 15.02.150 of this chapter for classifications).
Geologic hazard areas means those areas that because of their susceptibility to erosion, landsliding, earthquake, volcanic lahar, liquefaction or other geological events, are not suited to
Geologic hazard areas means areas susceptible to erosion, landslide, seismic, volcanic, or other geologic events (see Section 15.02.150 of this chapter for classifications).

Related to Geologic hazard areas

  • Coastal high hazard area means a Special Flood Hazard Area extending from offshore to the inland limit of a primary frontal dune along an open coast and any other area subject to high velocity wave action from storms or seismic sources. The area is designated on a FIRM, or other adopted flood map as determined in Article 3, Section B of this ordinance, as Zone VE.

  • Tidal Flood Hazard Area means a flood hazard area in which the flood elevation resulting from the two-, 10-, or 100-year storm, as applicable, is governed by tidal flooding from the Atlantic Ocean. Flooding in a tidal flood hazard area may be contributed to, or influenced by, stormwater runoff from inland areas, but the depth of flooding generated by the tidal rise and fall of the Atlantic Ocean is greater than flooding from any fluvial sources. In some situations, depending upon the extent of the storm surge from a particular storm event, a flood hazard area may be tidal in the 100-year storm, but fluvial in more frequent storm events.

  • Common Areas is defined as all areas and facilities outside the Premises and within the exterior boundary line of the Project and interior utility raceways and installations within the Unit that are provided and designated by the Lessor from time to time for the general non-exclusive use of Lessor, Lessee and other tenants of the Project and their respective employees, suppliers, shippers, customers, contractors and invitees, including parking areas, loading and unloading areas, trash areas, roadways, walkways, driveways and landscaped areas.

  • conservation area means any improved area within the boundaries of a redevelopment project area located within the territorial limits of the municipality in which 50% or more of the structures in the area have an age of 35 years or more. Such an area is not yet a blighted area but because of a combination of 3 or more of the following factors may be considered as a “conservation area”:

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Floodway means the channel of a river or other watercourse and the adjacent land areas that must be reserved in order to discharge the base flood without cumulatively increasing the water surface elevation more than a designated height.

  • Health hazard means any condition, device or practice in a water system or its operation resulting from a real or potential danger to the health and well-being of consumers. The word "severe" as used to qualify "health hazard" means a hazard to the health of the user that could be expected to result in death or significant reduction in the quality of life.

  • Floodplain or flood-prone area means any land area susceptible to being inundated by water from any source (see definition of “flood”).