Good Shipbuilding Practice definition

Good Shipbuilding Practice as used herein, means the construction of a ship or vessel, with due consideration to good quality, incorporating the specified components in order to meet Specification requirements, utilizing construction and testing methods to ensure that the completed ship will conform to the Contract Documents.
Sample 1Sample 2

Examples of Good Shipbuilding Practice in a sentence

  • The several major elements of Good Shipbuilding Practice are shown in Table 4.

  • All engineering and design services provided by Builder shall be provided utilizing Good Shipbuilding Practice and the generally accepted standard of care, skill and diligence as would be provided by a national shipbuilder to the U.S. maritime industry.

  • In multiple instances, owner’s representatives improperly have made demands of contractors beyond the written Specifications, asserting that the contractor had to fulfill those demands in order to comply with the contractor’s obligation to use Good Shipbuilding Practice.

  • The ATB Unit shall be constructed in a good and workmanlike manner consistent with Good Shipbuilding Practice and in accordance with the class standards set forth in the Specifications, Contract Documents and the requirements of the governing Regulatory Authorities.

  • Builder shall use its commercially reasonable efforts, acting in accordance with Good Shipbuilding Practice, to mitigate the consequences of an event of Force Majeure.

  • Builder shall provide all engineering and design services required for the performance of the Work utilizing Good Shipbuilding Practice and the generally accepted standard of care, skill, and diligence as would be provided by an engineering or naval architecture firm experienced in supplying engineering or naval architecture services nationally to the United States’ maritime industry.

  • Any request by Owner for changes to any plans and drawings, other than those changes required to comply with the Specifications, Good Shipbuilding Practice, or requirements of the Regulatory Authorities in effect as of the Effective Date, shall be handled as a request for a Change Order in accordance with Article 10.

  • Without limitation to the foregoing or to the provisions of Section 9.9, Builder also agrees to furnish a suitable location for the storage of OFE in accordance with Good Shipbuilding Practice, including without limitation the protection of OFE from the elements, theft, and damage as may be required by the nature of specific OFE.

  • Following the availability of the initial Project Schedule as provided in Section 8.4, Builder may, in the exercise of Good Shipbuilding Practice, propose a modification to the build strategy of the Vessel that alters the predicates to milestone payments from those set forth in this Agreement, but such modification shall be permitted only upon prior written approval by Owner, such approval not to be unreasonably withheld, conditioned or delayed.

  • To appreciate the extent to which both parties to a contract are bound by the tenets of Good Shipbuilding Practice, a clear understanding of that principle is necessary.

Related to Good Shipbuilding Practice

  • Good Engineering Practice means, Works carried out in accordance with the following standards/ specifications,

  • Shipbuilding Contract means the shipbuilding contract dated 30 March 2011 and made between the Builder and the Borrower for the construction by the Builder of the Ship and its purchase by the Borrower as supplemented and amended from time to time;

  • Good Manufacturing Practice or “GMP” means the current good manufacturing practices applicable from time to time to the manufacturing of a Product or any intermediate thereof pursuant to Applicable Law.

  • Good Manufacturing Practices means current good manufacturing practices, as set forth in 21 C.F.R. Parts 210 and 211.

  • Good Industry Practice means standards, practices, methods and procedures conforming to the Law and the degree of skill and care, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced person or body engaged in a similar type of undertaking under the same or similar circumstances.

  • Current Good Manufacturing Practices or “cGMP” means applicable Good Manufacturing Practices as specified in the United States Code of Federal Regulations and/or the EU Good Manufacturing Guidelines, and any successor legislation from time to time, prevailing at the time of the manufacture of the Product.

  • Prudent Operating Practice means (a) the applicable practices, methods and acts required by or consistent with applicable Laws and reliability criteria, and otherwise engaged in or approved by a significant portion of the electric utility industry during the relevant time period with respect to grid-interconnected, utility-scale generating facilities with integrated storage in the Western United States, or (b) any of the practices, methods and acts which, in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result at a reasonable cost consistent with good business practices, reliability, safety and expedition. Prudent Operating Practice is not intended to be limited to the optimum practice, method or act to the exclusion of all others, but rather to acceptable practices, methods or acts generally accepted in the industry with respect to grid-interconnected, utility-scale generating facilities with integrated storage in the Western United States. Prudent Operating Practice includes compliance with applicable Laws, applicable reliability criteria, and the criteria, rules and standards promulgated in the National Electric Safety Code and the National Electrical Code, as they may be amended or superseded from time to time, including the criteria, rules and standards of any successor organizations.

  • Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.

  • GMP means the amount proposed by Contractor and accepted by Owner as the maximum cost to Owner for construction of the Project in accordance with this Agreement. The GMP includes Contractor’s Construction Phase Fee, the General Conditions Cost, the Cost of the Work, and Contractor’s Contingency amount.

  • Ship means a vessel of any type whatsoever operating in the marine environment and includes hydrofoil boats, air-cushion vehicles, submersibles, floating craft and fixed or floating platforms.

  • Best Industry Practice means that degree of skill, care and foresight and operating practice that would reasonably and ordinarily be expected of a skilled and competent supplier of services engaged in the same type of undertaking as that of the Recipient or any contractors (as applicable) under the same or similar circumstances as those contemplated by this Agreement.

  • Commercial vessel means any vessel not owned and operated by the United States military or the United States Coast Guard.

  • Promising practice means a practice that presents, based upon preliminary information, potential for becoming a research-based or consensus-based practice.

  • Good Utility Practice means any of the practices, methods and acts engaged in or approved by a significant portion of the electric utility industry during the relevant time period, or any of the practices, methods and acts which, in the exercise of reasonable judgment in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result at a reasonable cost consistent with good business practices, reliability, safety and expedition. Good Utility Practice is not intended to be limited to the optimum practice, method, or act to the exclusion of all others, but rather is intended to include acceptable practices, methods, or acts generally accepted in the region; including those practices required by Federal Power Act, section 215(a)(4).

  • cGMP means current Good Manufacturing Practices as specified in the United States Code of Federal Regulations, ICH Guideline Q7A, or equivalent laws, rules, or regulations of an applicable Regulatory Authority at the time of manufacture.

  • Prudent Utility Practice means the applicable practices, methods, and acts engaged in or approved by a significant portion of the electric utility industry in the United States of America, during the relevant time period, or any of the practices, methods and acts which, in the exercise of reasonable judgment by a prudent utility operator, in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result consistent with good business practices, reliability, safety, expedition and the requirements of any governmental authority having jurisdiction. The Parties agree to provide such reasonable cooperation to each other as necessary to give effect to the terms of this Confirmation Agreement.

  • Shipyard means a facility capable of performing overhaul, repair, and maintenance work on covered vessels.

  • Good Laboratory Practice or “GLP” means the applicable then-current standards for laboratory activities for pharmaceuticals (including biologicals) or vaccines, as applicable, as set forth in the Act and any regulations or guidance documents promulgated thereunder, as amended from time to time, together with any similar standards of good laboratory practice as are required by any Regulatory Authority having jurisdiction over the applicable activity.

  • Practice of engineering means any service or creative work, the adequate performance of which requires engineering education, training, and experience in the application of special knowledge of the mathematical, physical, and engineering sciences.

  • Vessels shall have the meaning set forth in the recitals.

  • Building Contract means a contract entered into between the Grant Recipient and a Building Contractor relating to the construction, repair, refurbishment, conversion, development and/or Rehabilitation (as applicable) of a Firm Scheme; Building Contractor means any building contractor or developer appointed or to be appointed by the Grant Recipient in respect of a Firm Scheme; Business Day means any day other than a Saturday, Sunday or a statutory Bank Holiday in England;

  • Vessel means the vessel/craft belonging to the Contractor for carrying out the work.

  • Environmental and Social Standards or “ESSs” means, collectively: (i) “Environmental and Social Standard 1: Assessment and Management of Environmental and Social Risks and Impacts”; (ii) “Environmental and Social Standard 2: Labor and Working Conditions”; (iii) “Environmental and Social Standard 3: Resource Efficiency and Pollution Prevention and Management”;

  • Building Contractor means the building contractor or developer appointed or to be appointed by the Grant Recipient in respect of a Firm Scheme; Business Day means any day other than a Saturday, Sunday or a statutory Bank Holiday in England;

  • Tank vessel means a ship that is constructed or adapted to carry, or that carries, oil in bulk as cargo or cargo residue, and that:

  • Prudent Industry Practice means such practices, methods, acts, techniques, and standards as are in effect at the time in question that are consistent with (a) the standards generally followed by the United States pipeline and terminalling industries or (b) such higher standards as may be applied or followed by the Xxxxx Entities in the performance of similar tasks or projects, or by the Partnership Entities in the performance of similar tasks or projects.