Housing capacity definition

Housing capacity means the number of needed housing units that can be developed
Sample 1Sample 2Sample 3
Housing capacity means the number of needed housing units that can be developed on buildable lands within the 20-year planning period based on the land's comprehensive plan designation and capacity for housing development and redevelopment.
Sample 1
Housing capacity means the number of needed housing units
Sample 1Sample 2Sample 3

Examples of Housing capacity in a sentence

  • Housing capacity is based on the lot size times 50% times 24 dwelling units per acre.

  • PC Long Stay individuals may be placed directly into Supported Housing, or providers may use this new Supported Housing capacity for persons currently residing in more service-intensive, OMH funded residential programs.

  • This is explained in detail within Part 2 of the section 32 and supporting Appendix 1 – Updated Housing capacity Assessment February 202335.

  • Housing capacity is calculated using the full-time population that is eligible for housing on each campus.Table 14 compares enrollment, owned and operated applicable housing capacity at Ventura College to SBCC, Moorpark College, Oxnard College and California State Channel Islands.

  • Additional Isolation Housing capacity will be at the Medical Surge site located at NECC.2. Operations there will be guided by the NECC Action Plan.

  • The State has failed to comply with this provision.In her September 2015 report, the Independent Reviewer found that, although the State was in compliance with many of its obligations to persons with mental illness, “compliance had not been achieved” with this requirement because “the State does not yet have” the Supported Housing capacity to meet the needs of the target population.

  • The >>INSERT PROGRAM NAME>> has a program mission to >>INSERT GUIDING MISSION, VISION, VALUES>>The >>INSERT PROGRAM NAME>> Transitional Housing capacity is limited to serving>>INSERT NUMBERS TO BE SERVED ANNUALLY>> individuals/households per year to ensure adequate time and focus for the >>INSERT PROGRAM NAME>> Housing Advocate to work closely with program participants to address their needs.

  • The >>INSERT PROGRAM NAME>> has a program mission to >>INSERT GUIDING MISSION, VISION, VALUES>> The >>INSERT PROGRAM NAME>> Transitional Housing capacity is limited to serving >>INSERT NUMBERS TO BE SERVED ANNUALLY>> individuals/households per year to ensure adequate time and focus for the >>INSERT PROGRAM NAME>> Housing Advocate to work closely with program participants to address their needs.

  • Housing capacity: The project is a tenement building containing 250 residential units with over 50% allotted to PMAY.● 132 - 1BHK (30 sqm) and 29 - 2 BHK (50 sqm) residential units were implemented via the AHP and CLS verticals.● 89 residential units unreserved and to be sold by the developer.

  • Other major contributions were from Barnet (19,637), Redbridge (16,237) and Southwark (16,279).Table 3: Housing capacity in LondonSub-regionSource: London Housing Capacity Study (2005) Modelling carried out by Transport for London suggests that public transport schemes for which funding is already committed will have the capacity to meet transport demand from more housing in the western part of the London Thames Gateway than is currently planned (Murray-Clark 2007).


More Definitions of Housing capacity

Housing capacity means the number of needed housing units anticipated to be de-
Sample 1
Housing capacity means the number of needed housing units that can be developed on buildable lands within the 20-year planning pe- riod based on the land’s comprehensive plan
Sample 1

Related to Housing capacity

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Excess capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Nameplate Capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Local Capacity Area has the meaning set forth in the CAISO Tariff.

  • Ramping Capability means the sustained rate of change of generator output, in megawatts per minute.

  • Sub-acute facility means a facility that provides intermediate care on short-term or long-term basis.

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Final RTO Unforced Capacity Obligation means the capacity obligation for the PJM Region, determined in accordance with RAA, Schedule 8.

  • indemnified capacity means any and all past, present and future service by an indemnified representative in one or more capacities as a director, officer, employee or agent of the corporation, or, at the request of the corporation, as a director, officer, employee, agent, fiduciary or trustee of another corporation, partnership, joint venture, trust, employee benefit plan or other entity or enterprise;

  • Generation Capacity Resource shall have the meaning specified in the Reliability Assurance Agreement.

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Planned Financed Generation Capacity Resource means a Planned Generation Capacity Resource that, prior to August 7, 2015, has an effective Interconnection Service Agreement and has submitted to the Office of the Interconnection the appropriate certification attesting achievement of Financial Close.

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.