Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.
Prudent Industry Practices means, at a particular time, any of the practices, methods, standards of care, skill, safety and diligence, as the same may change from time to time, but applied in light of the facts known at the time, that are consistent with the general standards applied or utilized under comparable circumstances by a reasonably prudent operator, in a good and workmanlike manner, with due diligence and dispatch, in accordance with good midstream industry practice.
Proper practices means those set out in The Practitioners’ Guide
Prudent Utility Practices means the practices, methods and standards that are generally accepted internationally from time to time by electric utilities for the purpose of ensuring the safe, efficient and economic design, construction, commissioning, operation and maintenance of power generation equipment and which practices, methods and standards shall be adjusted as necessary, to take account of: a) operation and maintenance guidelines recommended by the manufacturers of the plant and equipment to be incorporated in the Power Project; b) the requirements of Indian Law; and the physical conditions at the site of the Power Project
Good Laboratory Practices or “GLP” means the then-current Good Laboratory Practice (or similar standards) for the performance of laboratory activities for pharmaceutical products as are required by applicable Regulatory Authorities or Applicable Law. In the United States, Good Laboratory Practices are established through FDA regulations (including 21 C.F.R. Part 58), FDA guidance, FDA current review and inspection standards and current industry standards.
Good Industry Practice means standards, practices, methods and procedures conforming to the Law and the degree of skill and care, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced person or body engaged in a similar type of undertaking under the same or similar circumstances.
Prudent Industry Practice means such practices, methods, acts, techniques, and standards as are in effect at the time in question that are consistent with (a) the standards generally followed by the United States pipeline and terminalling industries or (b) such higher standards as may be applied or followed by the Xxxxx Entities in the performance of similar tasks or projects, or by the Partnership Entities in the performance of similar tasks or projects.
Restorative practices means practices that emphasize repairing the harm to the victim and the school community caused by a student's misconduct.
Group practice means a group of two or more health care providers legally organized as a partnership, professional corporation, or similar association:
Best Practices means a term that is often used inter-changeably with “evidence-based 24 practice” and is best defined as an “umbrella” term for three levels of practice, measured in relation to 25 recovery-consistent mental health practices where the recovery process is supported with scientific 26 intervention that best meets the needs of the Client at this time.
27 a. EBP means Evidence-Based Practices and refers to the interventions utilized for which 28 there is consistent scientific evidence showing they improved Client outcomes and meets the following 29 criteria: it has been replicated in more than one geographic or practice setting with consistent results; it
Best Industry Practice means that degree of skill, care and foresight and operating practice that would reasonably and ordinarily be expected of a skilled and competent supplier of services engaged in the same type of undertaking as that of the Recipient or any contractors (as applicable) under the same or similar circumstances as those contemplated by this Agreement.
Collaborative pharmacy practice means a practice of pharmacy whereby one or
Good Utility Practices mean any of the practices, methods or acts engaged in or approved by a significant portion of the electric energy industry with respect to similar facilities during the relevant time period which in each case, in the exercise of reasonable judgment in light of the facts known or that should have been known at the time a decision was made, could have been expected to accomplish the desired result at reasonable cost consistent with good business practices, reliability, safety, law, regulation, environmental protection and expedition. Good Utility Practices are not intended to be limited to the optimum practices, methods or acts to the exclusion of all others, but rather to delineate the acceptable practices, methods or acts generally accepted in such industry.
Discriminatory practice means the violation of law referred to in Section 46a-51
Good Laboratory Practice or “GLP” means the applicable then-current standards for laboratory activities for pharmaceuticals (including biologicals) or vaccines, as applicable, as set forth in the Act and any regulations or guidance documents promulgated thereunder, as amended from time to time, together with any similar standards of good laboratory practice as are required by any Regulatory Authority having jurisdiction over the applicable activity.
Prudent Utility Practice means the applicable practices, methods, and acts engaged in or approved by a significant portion of the electric utility industry in the United States of America, during the relevant time period, or any of the practices, methods and acts which, in the exercise of reasonable judgment by a prudent utility operator, in light of the facts known at the time the decision was made, could have been expected to accomplish the desired result consistent with good business practices, reliability, safety, expedition and the requirements of any governmental authority having jurisdiction. The Parties agree to provide such reasonable cooperation to each other as necessary to give effect to the terms of this Confirmation Agreement.
Active practice means post-licensure practice at the level of licensure for which an applicant is seeking licensure in Virginia and shall include at least 360 hours of practice in a 12-month period.
Practices means that the practice(s) seems like a logical approach to addressing a specific behavior which is becoming distinct, recognizable among Clients and clinicians in practice, or innovators in academia or policy makers; and at least one recognized expert, group of researchers or other credible individuals have endorsed the practice as worthy of attention based on outcomes; and finally, it produces specific outcomes.
Good Manufacturing Practices means current good manufacturing practices, as set forth in 21 C.F.R. Parts 210 and 211.
Community practice protocol means a written, executed agreement entered into voluntarily between an authorized pharmacist and a physician establishing drug therapy management for one or more of the pharmacist’s and physician’s patients residing in a community setting. A community practice protocol shall comply with the requirements of subrule 8.34(2).
New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.
Best management practices (BMP) means schedules of activities, prohibitions of practices, maintenance procedures, and other management practices to prevent or reduce the pollution of waters of the United States. BMPs include treatment requirements, operation procedures, and practices to control plant site runoff, spillage or leaks, sludge or waste disposal, or drainage from raw material storage.
Prohibited Practices means the prohibited practices set forth in paragraph 4 of the Policy on Prohibited Practices;
Best Management Practices (BMPs means schedules of activities, prohibitions of practices, maintenance procedures, and other management practices to prevent or reduce the pollution of waters of the state. BMPs also include treatment requirements, operating procedures, and practices to control site runoff, spillage or leaks, sludge or waste disposal, or drainage from raw material storage.
Unsafe or unsound practice means a practice or conduct by a person licensed to engage in money transmission or an authorized delegate of such a person, which creates the likelihood of material loss, insolvency, or dissipation of the licensee’s assets, or otherwise materially prejudices the interests of its customers.
Unfair practice means (i) establishing contact with any person connected with or employed or engaged by the Authority with the objective of canvassing, lobbying or in any manner influencing or attempting to influence the Bidding Process; or (ii) having a Conflict of Interest; and