Isolation Points definition

Isolation Points means points allocated by the JSC to a community in accordance with Appendix “C”.
Sample 1Sample 2Sample 3

Examples of Isolation Points in a sentence

  • Prior to starting a task, each person in the workgroup must walk the task and verify that the Isolation Points where they have placed their Red Personal Lock and PDT match the Isolation List and the plant or equipment labelling.The required work tasks can then commence on the isolated equipment by each individual of the work group who have placed their Red Personal Lock and PDT on the required Lock Box.

  • These items should be identified on the current electrical system single line schematic drawing and identified on site by ALL PARTIES involved.• Section 3 – Precautions: This section is to be used to describe the agreed physical condition applied to the HV circuit and item i.e.: Isolation Point(s), Earthing Point(s) (switches or applied earth connections), and the number of earths applied.

  • Each person working on the equipment / plant must apply their Red Personal Lock complete with their PDT to the designated individual Isolation Points which would be either an Isolation Device or a Lock Box.

  • Any order given to the Supplier, or the acceptance of the Supplier's tender, shall be deemed to constitute an agreement to be bound by such terms and conditions.

  • Adding or Releasing Safe Clearance Locks and Tags (Energy Isolation Points) on an Existing Safe Clearance 7-77-7.

  • IsolationType of Isolation Location of IsolationPoints Single Isolation Point Multiple Isolation Points Group Isolation * Location of GroupIsolation Box: 5.

  • The following procedure is for a simple Isolation (eg 1 - 3 Isolation Points): W WAITDon't Jump InNo job is so urgent that it is worth risking your life for.

  • Isolation Points Where the integrity of the Isolation Point could be jeopardised, all work Shall immediately cease.

  • Isolation Points are not to be assessed "in Isolation" of the system.

  • Isolation Controller Locks are special Locks (some sites ORANGE) that may only be used by Isolation Controllers to prevent access to Lock Boxes containing keys used for Isolation Points in group Isolations.

Related to Isolation Points

  • Demarcation Point means the point where Qwest owned or controlled facilities cease, and CLEC, End User Customer, premises owner or landlord ownership or control of facilities begin. "Designed, Verified and Assigned Date" or "DVA" means the date on which implementation groups are to report that all documents and materials have been received and are complete.

  • Injection Point means the Electric Interconnection Point.

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Connection Point means an exit point or an entry point or a bidirectional point identified or to be identified as such in an access contract.

  • Process Gas means gas used for which altemate fuels, other than another gaseous fuel, are not technically feasible such as in applications requiring precise temperature controls and precise flame characteristics.

  • Inter-connection Point means interface point of renewable energy generating facility with the transmission system or distribution system, as the case may be:

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Destination Point means the delivery point(s) on Carrier’s System where Product is delivered to Shipper, as such points are specified in Section III of this tariff.

  • Collection Point means the collection point for the Vehicle specified in the Confirmation and/or Rental Agreement;

  • Service Switching Point (SSP) is a telephone central office switch equipped with a Signaling System 7 (SS7) interface.

  • Meet Point A point, designated by the Parties, at which one Party’s responsibility for service begins and the other Party’s responsibility ends.

  • Valuation Point means such time as shall be specified in the relevant Supplement for each Fund.

  • Isolation means a behavior management technique in which a student is placed alone in an enclosed space from which the student is not prevented from leaving.

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • Development Location Point means a single point selected by the Applicant on the proposed Development site that is located within 100 feet of a residential building existing or to be constructed as part of the proposed Development. For a Development which consists of Scattered Sites, this means a single point on the site with the most units that is located within 100 feet of a residential building existing or to be constructed as part of the proposed Development.

  • Service Switching Point (SSP means the telephone Central Office Switch equipped with a Signaling System 7 (SS7) interface.

  • Meet-Point Billing (MPB) refers to the billing associated with interconnection of facilities between two or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-xxxx environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • Delivery Points means: (i) for natural gas transported by interstate pipelines, the city gate stations of your Utility, and (ii) for electricity, one or more points at which Company, as your agent, has arranged for the delivery of electricity to a third party (such as your Utility) for your account or at your premises.

  • Generator Forced Outage means an immediate reduction in output or capacity or removal from service, in whole or in part, of a generating unit by reason of an Emergency or threatened Emergency, unanticipated failure, or other cause beyond the control of the owner or operator of the facility, as specified in the relevant portions of the PJM Manuals. A reduction in output or removal from service of a generating unit in response to changes in market conditions shall not constitute a Generator Forced Outage.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • Bottled water means water that is placed in a safety sealed container or package for

  • Throughput means the measure of production, or factor related to production, used to determine the relationship between the amount of energy used by the target unit and the levels of activity of the target unit, as set out in Schedule 6 to an underlying agreement; “the Tribunal” means the First-tier Tribunal established under the Xxxxxxxx Xxxxxx xxx Xxxxxxxxxxx Xxx 00000;

  • Meet-Point Billing (MPB means the billing associated with interconnection of facilities between two (2) or more LECs for the routing of traffic to and from an IXC with which one of the LECs does not have a direct connection. In a multi-bill environment, each Party bills the appropriate tariffed rate for its portion of a jointly provided Switched Exchange Access Service.

  • Receipt Point(s means the receipt points set forth in Section 6 of this Toll Schedule.