Loamy sand definition

Loamy sand means soil material that contains at the upper limit 85 to 90 percent sand, and the percentage silt plus 1.5 times the percentage of clay is not less than 15; at the lower limit it contains not less than 70 to 85 percent sand, and the percentage of silt plus twice the percentage of clay does not exceed 30.

Loamy sand means a soil textural class, as shown in Section XI.C.1 (USDA Soil Textural Triangle), that has a maximum of 85 to 90 percent (85-90%) sand with a percentage of silt plus one and a half (1.5) times the percentage of clay not in excess of fifteen (15); or a minimum of 70 to 85 percent (70-85%) sand with a percentage of silt plus one and a half (1.5) times the percentage of clay not in excess of thirty (30).

Loamy sand means a soil material containing 70 to 85 percent sand, up to 30 percent silt, and up to 15 percent clay.

Examples of Loamy sand in a sentence

• The following textural classes will be acceptable:• Loamy sand, including coarse, loamy fine, and loamy very fine sand.• Sandy loam, including coarse, fine and very fine sandy loam• Loam• Silt loam, with not more than 60 percent siltThe topsoil to be furnished by the Contractor will be loose and friable and free from refuse, stumps, roots, brush, weeds, rocks, and stones over 1 ¼ inches in diameter.

• The soil series is excessively drained, Sand to Loamy sand, Sandy Mixed hyperthermic Typic Ustipsamments.

• Where: Site one (S1) (Etta-Agbor workshop), Site two (S2) (Marian workshop), Site three (S3) (Main Avenue workshop), Site four (S4) (New Airport workshop), Site five (S5) (Uncontaminated soil), LS (Loamy sand), SL (Sandy loam).

• Soil at the station is a Hubbard Loamy sand (sandy mixed frigid Entic Hapludoll [Zvomuya et al., 2003]); planting followed rye in 2003, and the soil was ploughed and packed before seeding.

• Loamy sand – 25 percent or more very coarse, coarse, and medium sand and less than 50 percent either fine sand or very fine sand.

• Fig 3.1 shows calculated relative permeability from Eq 3.8, plotted on log scales against pressure head for a range of Van Genuchten soil water retention parameters.Table 3.1 Descriptive statistics of Van Genuchten water retention model parameters (α and n), from Carsel and Parrish (1988) α (1/m) n * Sample sizeα=0.8(1/m), n=1.09(Clay)α=3.6(1/m), n=1.56(Loam)α=7.5(1/m), n=1.89(Sandy loam)α=12.4(1/m),n=2.28 (Loamy sand )α=14.5(m), n=2.68(Sand)1 0.1 Kr (-)0.01 1 0.1 Suction (m) 0.010.0010.001 Fig.

• Previous studies on soils in New Zealand indicated that Loamy sand contained 0.1 – 1.45% Fe, 0.1 – 1.5% Fe2O3 (Luke, 1968b).

• Loamy sand: Soil that contains at the upper limit 85% to 90% sand: the percentage of silt, plus one and one-half times the percentage of clay, is not less than 15%.

• Soil and Agriculture Land Management The soil of the Jalore district are sandy loam, Loamy sand, black soil and problematic soil is also.

• Loamy sand, sand, and gravelly/cobbly loamy coarse sand are the general soil textural classifications that occur on the eastern flank of the reservoir.

More Definitions of Loamy sand

Loamy sand means soil material that contains 70 to 91 percent sand, and the percentage silt plus 1.5 times the percentage of clay is not less than 15, and the percentage of silt plus twice the percentage of clay is less than 30;

Loamy sand means a soil textural class, as shown in Figure 3 of Appendix A, that has a maximum of 85 to 90 percent sand with a percentage of silt plus 1.5 times the percentage of clay not in excess of 15; or a minimum of 70 to 85 percent sand with a percentage of silt plus 1.5 times the percentage of clay not in excess of 30.

Loamy sand means soil material that contains 70 to 91 percent sand, and the percentage silt plus 1.5 times the

Loamy sand means soil material

Loamy sand means soil material that contains at the upper limit 70 to 91 percent sand, and the percentage silt plus 1.5 times the percentage of clay is not less than 15; at the lower

Loamy sand means soil material that contains either: at the upper limit